Frames | No Frames
Return to Stylus Studio EDIFACT home page.|
Return to Stylus Studio EDIFACT D96A Messages page.
Container discharge/loading report message
This specification provides the definition of the Container discharge/loading report message (COARRI) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport.
1.1. Functional Definition
A message by which the container terminal reports that the containers specified have been discharged from a seagoing vessel (discharged as ordered, overlanded or shortlanded), or have been loaded into a seagoing vessel.
This message is part of a total set of container-related messages. These messages serve to facilitate the intermodal handling of containers by streamlining the information exchange. The business scenario for the container messages is clarified in a separate document, called: 'Guide to the scenario of EDIFACT container messages'.
1.2. Field of Application
The Container discharge/loading report message may be used for both national and international trade. It is based on universal commercial practice and is not dependent on the type of business or industry.
Business area: Loading and discharging of containers/equipment
Sending functions include: Container terminal, Stevedore
Receiving functions include: Ship's agent, Liner agent
In the context of the 'Guide to the scenario of EDIFACT container messages' (as referred to at the start of section 1) the following guidelines, rules and functionality apply to this Container discharge/loading report message:
The ordering customer agent, coded is needed to supplement the unique identification only in the following situation: the agent acts on behalf of several ordering customers issuing the same range of reference numbers for each customer. E.g., the ship's agent acts on behalf of several shipping lines issuing for each shipping line the same range of numbers.
See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 1.
3. TERMS AND DEFINITIONS
See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 2.
4. MESSAGE DEFINITION
4.1. Data Segment Clarification
This section should be read in conjunction with the Branching Diagram and the Segment Table which indicate mandatory, conditional and repeating requirements.
0010 | UNH, Message header
A service segment starting and uniquely identifying a message. The message type code for the Container discharge/loading report message is COARRI.
Note: Container discharge/loading report messages conforming to this document must contain the following data in segment UNH, composite S009:
0020 BGM, Beginning of message
A segment to indicate the beginning of a message and to transmit identifying number and the further specification of the message type (in data element 1001: Document/message name, coded), such as Loading report, Discharge report.
0030 FTX, Free text
A segment to specify free form or processable supplementary information, such as: - change information
0040 RFF, Reference
A segment to express a reference which applies to the entire message, such as: - container discharge/loading order reference - reference to previous message
A group of segments to indicate the main carriage means of transport.
0060 TDT, Details of transport
A segment identifying the voyage of the vessel relevant to the message (main transport).
0070 RFF, Reference
A segment identifying a relevant reference number, such as: - shipping - syndicate - marketing organization - conference code
0080 LOC, Place/location identification
A segment to identify a location related to the means of transport, such as: - place of departure/arrival (terminal within the port)
0090 DTM, Date/time/period
A segment identifying a date/time related to the arrival or departure of the vessel, such as: - estimated date/time of arrival/departure
A group of segments to identify a party and related contacts.
0110 NAD, Name and address
A segment to identify the party's name, address, and function, and other addresses, such as: - message recipient - message sender - ordering customer - ordering customer agent
0120 CTA, Contact information
A segment to identify a person or department of a message sender and/or message recipient, such as: - information contact
DGS-EQA-PIA-SG4-SG5-NAD A group of segments to specify containers either loaded or discharged; in the latter case - only in case of shortlanded - the group of segments is to specify containers that had to be discharged (according to the discharge order message).
In a normal discharge report and load report message the container details are only required if they differ from the details given in the respective order message. In case of overlanded containers this group will contain the full container details giving as much information as possible. In case of shortlanded containers this group will only contain the container prefix and number.
0140 EQD, Equipment details
A segment identifying a container, container size/type. The equipment status may be e.g. overlanded, shortlanded, import, export.
0150 RFF, Reference
A segment identifying a relevant reference number, such as: - container sequence number - booking reference number
0160 TMD, Transport movement details
A segment to indicate a Full Container Load (FCL) or a Less than Full Container Load (LCL).
0170 DTM, Date/time/period
A segment to identify a date/time related to the equipment, such as: - actual arrival/departure date/time - CSC expiration date (International Convention for Safe Containers)
0180 LOC, Place/location identification
A segment to identify a location or country related to the equipment, such as: - stowage cell - (final) place/port of discharge - transhipment place - place of delivery - country of origin/destination
0190 MEA, Measurements
A segment specifying a physical measurement related to the equipment, such as: - gross weight
0200 DIM, Dimensions
A segment specifying physical dimensions related to the equipment, such as: - gross dimensions - off standard dimension general - off standard dimension left - off standard dimension right - off standard dimension back - off standard dimension front
0210 TMP, Temperature
A segment which identifies the transport temperature setting of the container.
0220 RNG, Range details
A segment to specify the transport temperature range setting of the container.
0230 SEL, Seal number
A segment identifying a seal number related to the equipment.
0240 FTX, Free text
A segment to specify supplementary information related to the equipment, such as: - blockade reason - government inspection service - container loading remarks - container remarks - container order information - additional remarks concerning the container - container safety convention plate - continuous examination program (ACEP)
0250 DGS, Dangerous goods
A segment to identify the UN-number and the class of the dangerous goods loaded in the container.
0260 EQA, Attached equipment
A segment to identify clip-on units, such as: - generator sets
0270 PIA, Additional product id
A segment to specify a commodity code relating to goods in the container.
A group of segments to specify damage details related to the equipment.
0290 DAM, Damage
A segment to specify equipment damages, such as the point of the damage on the quipment, and the type of damage.
0300 COD, Component details
A segment to specify component details of the damaged equipment.
A group of segments to specify the planned on-carriage details in case this message is a discharge report message.
0320 TDT, Details of transport
A segment to identify the on-carriage transport details of the mode, means of transport by which the container will depart after being discharged.
0330 LOC, Place/location identification
A segment identifying a location related to the transport details, such as: - place of departure
0340 DTM, Date/time/period
A segment to specify a date/time relating to the on-carriage transport, such as arrival or departure date/time.
0350 NAD, Name and address
A segment to specify a related address or party, such as: - container operator
0360 CNT, Control total
A segment to specify the number of containers in the message, explicitly given by the sender.
0370 UNT, Message trailer
A service segment ending a message, giving the total number of segments in the message and the control reference number of the message.
4.2. Data segment index (Alphabetical sequence by tag)
4.3. Message structure
4.3.1. Segment table
Return to Stylus Studio EDIFACT D96A Messages page.