Frames | No Frames

Return to Stylus Studio EDIFACT home page.
Return to Stylus Studio EDIFACT D97B Messages page.
UN/EDIFACT
UNITED NATIONS STANDARD MESSAGE (UNSM)

Forwarding and consolidation summary message

Version:D
Release:97B
Contr. Agency:UN
Revision:7
Date:97-07-25
SOURCE:Western European EDIFACT Board

CONTENTS
Forwarding and consolidation summary message
  1. INTRODUCTION
  2. SCOPE
    1. Functional definition
    2. Field of application
    3. Principles
  3. REFERENCES
  4. TERMS AND DEFINITIONS
    1. Standard terms and definitions
  5. MESSAGE DEFINITION
    1. Data segment clarification
    2. Data segment index (alphabetical sequence)
    3. Message structure
      1. Segment table
  6. ANNEX

For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.6, UN/ECE UNSM General Introduction


This message also occurs in the following versions of this standard:
D93A, D94A, D94B, D95A, D95B, D96A, D96B, D97A, D97B, D98A, D98B, D99A, D99B, D00A, D00B, D01A, D01B, D01C, D02A, D02B, D03A, D03B, D04A, D04B

0. INTRODUCTION

This specification provides the definition of the Forwarding and consolidation summary message (IFCSUM) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport.


1. SCOPE


1.1. Functional Definition

A message to be used for consolidation purposes from a party arranging forwarding and transport services to the party for which the transport of the consolidated cargo is destined. The message can be used to exchange information concerning the consolidated cargo between forwarders, carriers and agents enabling those parties to handle the consignments included in this consolidation. In addition it can be used for a collection of consignments originating from one shipper for forwarding and transport services.


1.2. Field of Application

The Forwarding and consolidation summary message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry.


1.3. Principles

The IFCSUM message is a functionality in its own right, distinguishable from the transport booking and instruction messages. IFCSUM focuses on separate business areas in transport where the view on the operations is transport means or equipment oriented rather than consignment oriented. These business areas do not concentrate on concepts like booking or instruction. The IFCSUM provides currently merely a statement for a means of transport or equipment and their summary type information regarding the consignment carried. The IFCSUM message also provides a means to incorporate the control and auditability information needed for the receiver of the message to perform the operation to be carried out.

IFCSUM is foreseen to be used:

  • in the consolidation and deconsolidation industry (stuffing

and stripping of consignments in containers)

  • in the groupage and degroupage industry (the full load description of rail-cars and road vehicles)
  • in the collection and distribution industry (as the description of all consignments to be collected together (maybe from different places) and delivered at possibly different places in a certain region)
  • for the declaration of dangerous cargo by ship's agents to their Port Authorities (as listing of the dangerous cargo carried or to be carried by as means of transport).

The message provides information concerning cargo carried on a voyage specifying details regarding carrier, mode of transport, means of transport, equipment and the necessary details of the consignments included in the consolidated cargo. Under given circumstances a cargo manifest can be obtained through the use of the IFCSUM. For example, a IFCSUM message can be used in groupage traffic, where it may correspond to a loading list indicating the consignments that have been loaded on a truck.

There is a need for FUNCTIONAL SUBSETS to be derived from the message, for example:

  • CONSOLIDATION ADVICE giving information about the departure of a voyage/flight or consolidation to the receiver.
  • CONSOLIDATION STATUS giving information about the departure of a voyage/flight or consolidation to principals (e.g. carrier to freight forwarder, consolidator to co-loader etc.).
  • CONSOLIDATION REPORT giving information about the arrival and unloading, clearance, etc. from the receiver to the sender. According to the different information requirements of carriers, carrier's agents, and freight forwarders for the different modes of transport like air, deep sea, inland waterways, rail, road, combined- and/or multimodal- transport different modal subsets can be derived from this message.

There is a need for INTRAMODAL SUBSETS to be transmitted between partners of the same mode of transport (e.g. railway to railway in different countries, deep-sea-carrier to deep- sea carrier, freight forwarder to freight forwarder etc.).

There is another need for INTERMODAL SUBSETS to be transmitted between partners in a multimodal transport (e.g. freight forwarder to trucker, trucker to railway, railway to port authority, port authority to carrier's agent, carrier's agent to carrier etc.).

  • A consignment may contain several goods items.
  • Goods items may or may not be containerized.
  • A goods item may be transported in one or more containers, and a single container may contain one or more goods items.
  • One goods item may be related to one or more customs tariff codes.
  • Goods items related to one customs tariff code may be carried in one or more containers.
  • Goods items may reflect either the contractual or operational description of the goods.
  • Pre-carriage (advanced haulage) and/or on-carriage (destination haulage) of goods items or equipment within one booking or instruction may take place in different steps, each step specified with its own transport details group.
  • Equipment may have other types of equipment attached to it, e.g. a temperature control unit attached to a container.
  • Equipment and/or goods items may be attached to or transported on another load or transport device, which as such may be attached to or transported on yet another load or transport device, e.g. a container on a chassis on a rail-car.
  • Transport devices, which have the ability of powered movement on their own, are specified in the transport details group. Other load or transport devices are specified as equipment.
  • The expression of packaging for goods items can be expressed at up to three levels.

A number of generic transport terms are used in this specification, to be described as:

  • MODE OF TRANSPORT: the method of transport used for the conveyance of goods or persons, e.g. by rail, by road, by sea.
  • MEANS OF TRANSPORT: the vehicle used for the transport of goods or persons, e.g. aircraft, truck, vessel.
  • TYPE OF MEANS OF TRANSPORT: the type of vehicle used in the transport process, e.g. wide body, tank truck, passenger vessel.
  • EQUIPMENT: material resources necessary to facilitate the transport and handling of cargo. Transport equipment does under the given circumstances not have the ability to move by its own propulsion (e.g. sea container, trailer, unit load device, pallet).
  • TYPE OF EQUIPMENT: the type of material used, e.g. 40 feet container, four way pallet, mafi trailer.

2. REFERENCES

See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 1.


3. TERMS AND DEFINITIONS


3.1. Standard terms and definitions

See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 2.


4. MESSAGE DEFINITION


4.1. Data Segment Clarification

This section should be read in conjunction with the Segment Table which indicate mandatory, conditional and repeating requirements.

0010 UNH, Message header

A service segment starting and uniquely identifying a message. The message type code for the Forwarding and consolidation summary message is IFCSUM.

Note: Forwarding and consolidation summary messages conforming to this document must contain the following data in segment UNH, composite S009:

Data element0065IFCSUM
0052D
005497B
0051UN

0020 BGM, Beginning of message

A segment to indicate the beginning of the message and to transmit identifying number (e.g. Master B/L, Master AWB etc.), type, date and the function of the message.

0030 DTM, Date/time/period

A segment to specify date/time of the document/message.

0040 MOA, Monetary amount

A segment to specify a monetary total associated to the whole consolidation.

0050 FTX, Free text

A segment to give information and/or processable instructions in addition to that in other segments.

0060 CNT, Control total

A segment to specify totals of the consolidation (e.g. total number of equipment, total number of consignments, total gross weight and/or dimensions of the whole consolidation etc.).

0070 Segment Group 1: RFF-DTM

A group of segments containing references and constants which apply to the entire message.

0080 RFF, Reference

A segment to express a reference which applies to the entire message.

0090 DTM, Date/time/period

A segment to indicate date and time relating to the reference.

0100 Segment Group 2: GOR-DTM-LOC-SEL-FTX-SG3

A group of segments to give information about the current customs procedure under which the transport is moving or to indicate applicable governmental procedures related to import, export and transit of the voyage/flight or consolidation.

0110 GOR, Governmental requirements

A segment to give information about the current customs procedure under which the transport is moving or to indicate applicable governmental procedures to import, export and transit of the voyage/flight or consolidation.

0120 DTM, Date/time/period

A segment to indicate date(s) and time(s) related to documents and/ or customs- and/or governmental procedures (e.g. date of issuing of customs document, expiration date of customs document etc.).

0130 LOC, Place/location identification

A segment to specify locations associated with customs-and/or governmental-procedures (e.g. customs office of exit, customs office of destination etc.).

0140 SEL, Seal number

A segment to identify seals and seal issuer associated with the customs procedure and/or customs document specified in this segment group.

0150 FTX, Free text

A segment to specify additional governmental requirements information.

0160 Segment Group 3: DOC-DTM

A group of segments to indicate document(s) required.

0170 DOC, Document/message details

A segment to indicate document(s) required by government or related to a specified customs- and/or other governmental procedure and/or accompanying goods.

0180 DTM, Date/time/period

A segment to specify a date/time related to the indicated document.

0190 Segment Group 4: NAD-SG5-SG6

A group of segments to identify a party and related contacts and references.

0200 NAD, Name and address

A segment to identify the party's name, address and function.

0210 Segment Group 5: CTA-COM

A group of segments to identify a contact and its communications related to the party.

0220 CTA, Contact information

A segment to identify a person or department within the party.

0230 COM, Communication contact

A segment to identify a communication number of a person or department to whom communication should be directed.

0240 Segment Group 6: RFF-DTM

A group of segments to specify a reference related to the party, and its associated dates and/or times.

0250 RFF, Reference

A segment to specify a reference related to the party.

0260 DTM, Date/time/period

A segment to indicate date and/or time associated to the reference.

0270 Segment Group 7: TCC-CUX-PRI-EQN-PCD-MOA-QTY-LOC

A group of segments to specify charges associated with the transport of the consolidation.

0280 TCC, Transport charge/rate calculations

A segment to specify a charge.

0290 + CUX, Currencies

A segment to specify currency details related to the freight.

0300 PRI, Price details

A segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilogram).

0310 EQN, Number of units

A segment to specify the number of units to which the unit price basis applies.

0320 PCD, Percentage details

A segment to indicate the applicable reduction or surcharge percentage details.

0330 MOA, Monetary amount

A segment to specify an amount associated with the charges and/or related to the transport of the consolidation.

0340 QTY, Quantity

A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight.

0350 LOC, Place/location identification

A segment to indicate locations related to a charge (e.g. beginning and/or end of a chargeable section).

0360 Segment Group 8: TDT-TSR-LOC-DTM-SEL-FTX-SG9-SG10-SG11-SG12

A group of segments to describe all transport details of the voyage/flight or consolidation and of all parties involved.

0370 TDT, Details of transport

A segment to indicate information related to a certain stage of the transport, such as mode, means, type of means of transport, carrier, voyage/flight number, etc.

0380 TSR, Transport service requirements

A segment to identify contract, conditions of carriage, services and priority requirements for this stage of the transport of the consolidation.

0390 LOC, Place/location identification

A segment indicating relevant locations related to the transport of the consolidation (e.g. place of loading, place of discharge, transhipment place etc.) dependent on the transport stage.

0400 DTM, Date/time/period

A segment indicating pertinent date(s) and time(s) (e.g. date of departure/arrival etc.) dependent on the transport stage.

0410 SEL, Seal number

A segment to identify seals and seal issuer associated with the means of transport in the transport stage.

0420 FTX, Free text

A segment to specify processable instructions regarding mode, means of transport, transhipment, unloading, direct delivery, new documentation etc. related to the specified transport stage.

0430 Segment Group 9: MEA-EQN

A group of segments indicating relevant weights.

0440 MEA, Measurements

A segment indicating relevant weights of the means of transport used in the specified transport stage.

0450 EQN, Number of units

A segment indicating the number of transportable units related to the information in the segment MEA.

0460 Segment Group 10: DIM-EQN

A group of segments indicating relevant dimensions.

0470 DIM, Dimensions

A segment indicating relevant dimensions of the means of transport used in the specified transport stage.

0480 EQN, Number of units

A segment indicating the number of transportable units related to the information in the segment DIM.

0490 Segment Group 11: CTA-COM

A group of segments to indicate relevant contacts.

0500 CTA, Contact information

A segment to identify a relevant department and/or person related to the carrier specified in the segment TDT.

0510 COM, Communication contact

A segment indicating the communication channel and the relevant communication number of the department or persons.

0520 Segment Group 12: NAD-LOC-SG13-SG14-SG15-SG16

A group of segments to specify the parties related to the specified transport stage.

0530 NAD, Name and address

A segment to specify the names and addresses of the parties which are loading, sending, consolidating, unloading, acting as transhipment agent, break bulk agent, etc. related to the specified transport stage.

0540 LOC, Place/location identification

A segment to indicate any location relevant to the party specified in the segment NAD.

0550 Segment Group 13: CTA-COM

A group of segments to indicate contacts related to the party.

0560 CTA, Contact information

A segment to identify a relevant department and/or person related to the party specified in the segment NAD.

0570 COM, Communication contact

A segment indicating the communication channel and the relevant communication number of the department or persons mentioned in segment CTA.

0580 Segment Group 14: DOC-DTM

A group of segments to specify a document related to the party.

0590 DOC, Document/message details

A segment to identify a document required or accompanying goods of, by, or for the party specified in the segment NAD.

0600 DTM, Date/time/period

A segment to indicate a date/time related to the required document.

0610 Segment Group 15: TCC-CUX-PRI-EQN-PCD-MOA-QTY

A group of segments to specify charges associated with the party.

0620 TCC, Transport charge/rate calculations

A segment to specify a charge associated with the party.

0630 + CUX, Currencies

A segment to specify currency details related to the freight.

0640 PRI, Price details

A segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilogram).

0650 EQN, Number of units

A segment to specify the number of units to which the unit price basis applies.

0660 PCD, Percentage details

A segment to indicate the applicable reduction or surcharge percentage details.

0670 MOA, Monetary amount

A segment to specify an amount associated with the charges and/or related to the transport of the consolidation.

0680 QTY, Quantity

A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight.

0690 Segment Group 16: RFF-DTM

A group of segments to specify a reference related to the party, and its associated dates and/or times.

0700 RFF, Reference

A segment to specify a reference related to the party.

0710 DTM, Date/time/period

A segment to specify a date and/or time associated with the reference.

0720 Segment Group 17: EQD-EQN-TPL-TMD-MEA-DIM-SEL-NAD-LOC-HAN-TMP-

FTX-RFF-PCD-SG18 A group of segments to specify equipment in which consignments are transported (e.g. trailer, railway wagon, ULD, etc.). This segment group WILL NOT be used in the deep sea context. This is because EQD in this context is used to define an extended transport such as a trailer attached to a truck, containers attached to a trailer etc. Containers in the deep sea context ARE NOT part of an extended definition of transport but are considered as integral with the consignment and are thus described at the consignment level.

0730 EQD, Equipment details

A segment to specify equipment, and equipment size and type used for the transport of the consolidation.

0740 EQN, Number of units

A segment to specify the number of pieces of equipment of the same size and type if the equipment number in the segment EQD is not specified (Composite C237).

0750 TPL, Transport placement

A segment to identify transport details for the equipment.

0760 TMD, Transport movement details

A segment to specify transport movement details for the equipment named in segment EQD.

0770 MEA, Measurements

A segment to specify weights associated with the equipment named in segment EQD which are not indicated in the segment EQD.

0780 DIM, Dimensions

A segment to specify dimensions associated with the equipment named in segment EQD which are not indicated in the segment EQD.

0790 SEL, Seal number

A segment to specify seals and seal issuer associated with the equipment named in segment EQD.

0800 NAD, Name and address

A segment to specify parties associated with the equipment named in segment EQD (e.g. owner of the equipment, party to which the empty equipment has to be delivered etc.).

0810 LOC, Place/location identification

A segment to specify locations associated with the party and/or the equipment.

0820 HAN, Handling instructions

A segment to specify handling instructions for specified equipment.

0830 TMP, Temperature

A segment to specify a temperature setting for the equipment.

0840 FTX, Free text

A segment to specify processable instructions associated with the equipment named in segment EQD (e.g. instructions related to the delivery of the empty equipment after unloading of the consignments etc.).

0850 + RFF, Reference

A segment to specify a reference number to equipment.

0860 + PCD, Percentage details

A segment to specify percentages related to the equipment such as percentage humidity.

0870 Segment Group 18: EQA-EQN

A group of segments to identify attached or related equipment.

0880 EQA, Attached equipment

A segment to identify attached and/or related equipment such as chassis attached to a container.

0890 EQN, Number of units

A segment to specify the number of pieces of equipment named in the segment EQA attached to the equipment named in the segment EQD.

0900 Segment Group 19: CNI-SG20-SG22-CTA-COM-DTM-CNT-TSR-CUX-MOA-

FTX-SG24-SG25-SG26-SG27-SG29-SG30-SG31-SG34- SG41-SG60 A segment group to give information about all consignments included in a voyage/flight or consolidation. The segment group can be used in two different manners to serve different approaches to consolidate messages:

- Short form consolidation message

In this situation, single consignment based functional messages (e.g. booking and/or instruction messages) have been sent on a progressive basis between exchanging partners (e.g. freight forwarder on the export side to freight forwarder on the import side). When the loading of the vessel/aircraft or consolidation is complete the IFCSUM-message will be sent and will use the CNI-segments to identify the transport document/message number (e.g. bill of lading, air-way bill, etc.) of every consignment, the details of which have already been sent as separate single consignment based messages (e.g. booking and/or instruction messages) or which will be sent as separate single consignment based messages following the IFCSUM-message using the option of grouping with the UNG-service-segment in a transmission. When the carrier himself loads consignments in a container or ULD the segment SGP and/or TPL following the CNI can be used to indicate in which equipment specified in the EQD-group on top level and/or which means of transport specified in the TDT-group on top level the consignment is loaded.

Thus the short form IFCSUM-message operates as a reconciliation and control statement.

- Extended form consolidation message

In this situation, the data for each individual consignment has NOT been sent to the receiving partner by means of single consignment based messages (e.g. booking and/or instruction messages) separate to the IFCSUM message. In these circumstances it is possible to include the details of each consignment into the IFCSUM-message. In that case the segment (group) SGP and TPL following the segment CNI will not be used. For every consignment the complete structure of a single consignment based message can be used starting with the segment CNI replacing the BGM.

Thus the extended form IFCSUM-message has not the function of referencing but to show as full a set of consignment data as is necessary to meet the requirements of type of consolidation message being constructed, e.g. Cargo vs. Full Freight.

0910 CNI, Consignment information

A segment to indicate consignments included in the consolidation using the transport document/message number or to replace the segment BGM of a single consignment based message structure.

0920 Segment Group 20: SGP-SG21

A group of segments to specify the distribution of a consignment among the transport equipment.

0930 SGP, Split goods placement

A segment to identify the equipment in which a consignment is loaded.

0940 Segment Group 21: MEA-EQN

A group of segments to identify measurements.

0950 MEA, Measurements

A segment to specify measurements of that portion of the consignment in the equipment.

0960 EQN, Number of units

A segment to specify the number of equipment units to each of which the given measurement applies.

0970 Segment Group 22: TPL-SG23

A group of segments to identify transport details and associated measurements for this consignment. This group may be repeated to indicate the different phases of the movement.

0980 TPL, Transport placement

A segment to identify transport details for the consignment.

0990 Segment Group 23: MEA-EQN

A group of segments to identify measurements.

1000 MEA, Measurements

A segment to specify the distribution of the consignment among the transport details.

1010 EQN, Number of units

A segment to specify the number of equipment units to each of which the given measurement applies.

1020 CTA, Contact information

A segment to identify a person or department to whom communication should be directed.

1030 COM, Communication contact

A segment to identify a communication number of a person or department to whom communication should be directed.

1040 DTM, Date/time/period

A segment to indicate a date and time applying to the whole consignment, e.g., date and time of document issue.

1050 CNT, Control total

A segment to specify totals for a consignment.

1060 TSR, Transport service requirements

A segment to identify the contract, conditions of carriage, services, and priority requirements for the transport.

1070 CUX, Currencies

A segment to indicate default currencies and exchange rates.

1080 MOA, Monetary amount

A segment to indicate a monetary value for entire consignment, e.g. insured value, invoice amount, disbursements, etc.

1090 FTX, Free text

A segment to specify free form or processable supplementary information, such as status of transport, remarks to be printed on the transport documents (where required), consignment remarks, insurance instructions, etc., or any other additional information.

1100 Segment Group 24: LOC-DTM

A group of segments to specify locations and related date(s)/time(s) which apply to the entire consignment, e.g. place of transhipment.

1110 LOC, Place/location identification

A segment to identify a location applying to the entire consignment.

1120 DTM, Date/time/period

A segment to indicate date(s) and time(s) relating to the location.

1130 Segment Group 25: TOD-LOC

A group of segments to specify terms of delivery and related locations.

1140 TOD, Terms of delivery or transport

A segment to specify the applicable terms of delivery.

1150 LOC, Place/location identification

A segment to specify a location related to the terms of delivery.

1160 Segment Group 26: RFF-DTM

A group of segments containing a reference and constants which apply to the entire consignment.

1170 RFF, Reference

A segment to express a reference which applies to the entire consignment such as: the document/message number that is to be updated by this very message (according to data element 1225 Message Function, Coded in segment BGM), booking reference, order number, insurance contract, etc.

1180 DTM, Date/time/period

A segment to indicate date and time relating to the reference.

1190 Segment Group 27: GOR-DTM-LOC-SEL-FTX-SG28

A group of segments to identify customs and other governmental procedures and required documents.

1200 GOR, Governmental requirements

A segment to indicate applicable governmental procedures related to import, export and transport of the goods.

1210 DTM, Date/time/period

A segment to indicate date and time related to documents and/or customs- and/or governmental procedures for the consignment (e.g. date of issuing of customs document, expiration date of customs document etc.).

1220 LOC, Place/location identification

A segment to specify locations associated with customs-and/or governmental procedures for this consignment (e.g. customs office of exit, customs office of destination etc.).

1230 SEL, Seal number

A segment to identify seals and seal issuer associated with the customs procedure and/or customs document for this consignment.

1240 FTX, Free text

A segment to provide supplementary governmental requirements information for this consignment.

1250 Segment Group 28: DOC-DTM

A group of segments to specify required documents by government.

1260 DOC, Document/message details

A segment to indicate a document required by government.

1270 DTM, Date/time/period

A segment to specify the date/time related to the required document.

1280 Segment Group 29: CPI-RFF-CUX-LOC-MOA

A group of segments to indicate charge methodology which applies to the entire consignment.

1290 CPI, Charge payment instructions

A segment to indicate default charge methodology.

1300 RFF, Reference

A segment to indicate a reference relating to the CPI segment, such as charge reference number.

1310 CUX, Currencies

A segment to specify the payment currency related to the charge methodology.

1320 LOC, Place/location identification

A segment to identify the place of charge collection.

1330 MOA, Monetary amount

A segment to identify the monetary amount associated with the charges.

1340 Segment Group 30: TCC-LOC-FTX-CUX-PRI-EQN-PCD-MOA-QTY

A group of segments to specify charge calculations associated with the transport.

1350 TCC, Transport charge/rate calculations

A segment to specify charge.

1360 LOC, Place/location identification

A segment to indicate a location.

1370 FTX, Free text

A segment to specify processable supplementary information associated with charge.

1380 CUX, Currencies

A segment to specify currencies associated with charge.

1390 PRI, Price details

A segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilograms).

1400 EQN, Number of units

A segment to specify the number of units to which the unit price basis applies.

1410 PCD, Percentage details

A segment to indicate the applicable reduction or surcharge percentage details.

1420 MOA, Monetary amount

A segment to specify a monetary amount, such as prepaid amount, discount or total amount.

1430 QTY, Quantity

A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight.

1440 Segment Group 31: TDT-DTM-TSR-SG32-SG33

A group of segments to indicate details of the movement of goods such as mode and means of transport, locations, departure, and arrival date(s) and time(s).

1450 TDT, Details of transport

A segment to indicate information related to a certain stage of the transport, such as mode, means and carrier.

1460 DTM, Date/time/period

A segment to indicate departure/arrival date and time.

1470 TSR, Transport service requirements

A segment to identify contract, conditions of carriage, services, priority requirements for this stage of transport.

1480 Segment Group 32: LOC-DTM

A group of segments to specify a location and date/time related to this leg of transport.

1490 LOC, Place/location identification

A segment to indicate a location such as origin, destination, stop off, etc. related to this leg of transport.

1500 DTM, Date/time/period

A segment to specify a date/time related to the location, such as arrival date/time of a means of transport at a specific location.

1510 Segment Group 33: RFF-DTM

A group of segments to specify an additional reference related to the stage of the transport.

1520 RFF, Reference

A segment to specify an additional reference.

1530 DTM, Date/time/period

A segment to identify date and time relating to the reference.

1540 Segment Group 34: NAD-LOC-MOA-SG35-SG36-SG37-SG38-SG39-SG40

A group of segments to identify a party, related references, locations contacts, required documents, and charges to be paid by the party.

1550 NAD, Name and address

A segment to identify the party's name, address, and function.

1560 LOC, Place/location identification

A segment to indicate location where a specific function will be performed.

1570 MOA, Monetary amount

A segment to identify the monetary amount associated with the party.

1580 Segment Group 35: CTA-COM

A group of segments identifying a contact and its communications related to the party.

1590 CTA, Contact information

A segment to identify a person or department within a party.

1600 COM, Communication contact

A segment to identify a communication number of a person or department to whom communication should be directed.

1610 Segment Group 36: DOC-DTM

A group of segments to identify required documents.

1620 DOC, Document/message details

A segment to identify a document required of, by or for the party.

1630 DTM, Date/time/period

A segment to identify date and time relating to the reference.

1640 Segment Group 37: TCC-CUX-PRI-EQN-PCD-MOA-QTY

A group of segments to specify charges associated with the party.

1650 TCC, Transport charge/rate calculations

A segment to specify charges associated with the party.

1660 + CUX, Currencies

A segment to specify currency details related to the freight.

1670 PRI, Price details

A segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilograms).

1680 EQN, Number of units

A segment to specify the number of units to which the unit price basis applies.

1690 PCD, Percentage details

A segment to indicate the applicable reduction or surcharge percentage details.

1700 MOA, Monetary amount

A segment to specify a monetary amount, such as prepaid amount, discount or total amount.

1710 QTY, Quantity

A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight.

1720 Segment Group 38: RFF-DTM

A group of segments to specify a reference related to the party.

1730 RFF, Reference

A segment to identify a reference used by a party.

1740 DTM, Date/time/period

A segment to indicate date and time relating to the reference.

1750 Segment Group 39: CPI-RFF-CUX-LOC-MOA

A group of segments to identify the charge and its amount to be paid by the party.

1760 CPI, Charge payment instructions

A segment to identify default charge methodology.

1770 RFF, Reference

A segment to indicate a reference relating to the CPI segment, such as charge reference number.

1780 CUX, Currencies

A segment to indicate payment currency related to the charge methodology.

1790 LOC, Place/location identification

A segment to identify the place of charge collection.

1800 MOA, Monetary amount

A segment to identify the monetary amount associated with the charges.

1810 Segment Group 40: TSR-RFF-LOC-TPL-FTX

A group of segments to specify a transport service requirement and its associated details (such as applicable commercial agreement) related to the party.

1820 TSR, Transport service requirements

A segment to specify a required service for the transport, such as re-icing.

1830 RFF, Reference

A segment to identify a commercial agreement related to the service requirement.

1840 LOC, Place/location identification

A segment to indicate the location where the required service must be performed, such as place of re-icing.

1850 TPL, Transport placement

A segment to indicate the location where the required service must be performed, such as place of re-icing.

1860 FTX, Free text

A segment to provide any additional information related to the service requirement.

1870 Segment Group 41: GID-HAN-TMP-RNG-TMD-LOC-MOA-PIA-GIN-FTX-

SG42-GDS-SG43-SG44-SG45-SG46-SG47-SG48- SG50-SG52-SG54-SG55 A group of segments to describe the goods items for which transport is undertaken.

1880 GID, Goods item details

A segment to identify a goods item for which transport is undertaken. A goods item can be identified by up to three levels of packaging.

1890 HAN, Handling instructions

A segment to specify handling instructions relating to the goods item.

1900 TMP, Temperature

A segment to specify a temperature setting for a goods item.

1910 RNG, Range details

A segment to specify a temperature range setting for a goods item.

1920 TMD, Transport movement details

A segment to specify transport movement details for a goods item.

1930 LOC, Place/location identification

A segment to specify a country associated with a goods item, such as country of origin, or country of destination.

1940 MOA, Monetary amount

A segment to specify a monetary amount associated with a goods item, such as declared value, FOB value, etc.

1950 PIA, Additional product id

A segment to specify article numbers.

1960 GIN, Goods identity number

A segment providing the identity of goods being transported.

1970 FTX, Free text

A segment to specify processable supplementary information relating to the goods item.

1980 Segment Group 42: NAD-DTM

A group of segments to identify different places of collection and/or delivery for the goods item.

1990 NAD, Name and address

A segment to specify an address of a place of collection or delivery for a goods item.

2000 DTM, Date/time/period

A segment to indicate date and time relating to the place of collection or delivery.

2010 GDS, Nature of cargo

A segment to describe the nature of cargo.

2020 Segment Group 43: MEA-EQN

A group of segments to specify measurements applicable to a goods item.

2030 MEA, Measurements

A segment to specify measurements, other than dimensions, applicable to a goods item.

2040 EQN, Number of units

A segment to specify the number of equipment units to each of which the given measurement applies.

2050 Segment Group 44: DIM-EQN

A group of segments to specify dimensions applicable to a goods item.

2060 DIM, Dimensions

To specify dimensions applicable to a goods item.

2070 EQN, Number of units

A segment to specify the number of equipment units to each of which the given dimension applies.

2080 Segment Group 45: RFF-DTM

A group of segments to identify references to a goods item.

2090 RFF, Reference

A segment to identify a reference to a goods item.

2100 DTM, Date/time/period

A segment to indicate date and time relating to the reference.

2110 Segment Group 46: PCI-RFF-DTM-GIN

A group of segments to specify marks and numbers of a goods item.

2120 PCI, Package identification

A segment to specify marks and numbers of a good item.

2130 RFF, Reference

A segment to identify a reference relating to the marks and numbers.

2140 DTM, Date/time/period

A segment to identify date and time of the reference.

2150 GIN, Goods identity number

A segment to specify identifying numbers related to transport units, such as batch numbers, serial numbers, etc.

2160 Segment Group 47: DOC-DTM

A group of segments to specify documents and associated date(s) and time(s) for a goods item.

2170 DOC, Document/message details

A segment to specify a document prepared for a goods item.

2180 DTM, Date/time/period

A segment to associate date and time with the prepared document.

2190 Segment Group 48: GOR-DTM-LOC-SEL-FTX-SG49

A group of segments to identify customs and other governmental procedures and required documents relating to the goods item.

2200 GOR, Governmental requirements

A segment to indicate applicable governmental procedures related to import, export and transport of the goods item.

2210 DTM, Date/time/period

A segment to indicate date and time related to documents and/or customs- and/or governmental procedures for the goods item.

2220 LOC, Place/location identification

A segment to specify locations associated with customs- and/or governmental procedures.

2230 SEL, Seal number

A segment to identify seals and seal issuer associated with the customs procedure and/or customs document for the goods item.

2240 FTX, Free text

A segment to provide additional governmental requirements information for the goods item.

2250 Segment Group 49: DOC-DTM

A group of segments to specify required documents by government for the goods item.

2260 DOC, Document/message details

A segment to indicate a document required by government.

2270 DTM, Date/time/period

A segment to specify the date/time related to the required document.

2280 Segment Group 50: TPL-SG51

A group of segments to identify transport details and associated measurements for a goods item. This group may be repeated to indicate the different phases of the movement.

2290 TPL, Transport placement

A segment to identify transport details for a goods item.

2300 Segment Group 51: MEA-EQN

A group of segments to identify measurements.

2310 MEA, Measurements

A segment to specify the distribution of a goods item among the transport details.

2320 EQN, Number of units

A segment to specify the number of equipment units to each of which the given measurement applies.

2330 Segment Group 52: SGP-SEQ-SG53

A group of segments to specify the distribution of a goods item among the transport equipment.

2340 SGP, Split goods placement

A segment to identify the equipment in which goods are transported.

2350 SEQ, Sequence details

A segment to indicate the order in which cargo is stowed in a container by use of a sequence number. The lowest number indicates stowage in the front of the container with higher numbers indicating that the cargo is stowed more toward the rear door.

2360 Segment Group 53: MEA-EQN

A group of segments to identify measurements.

2370 MEA, Measurements

A segment to specify measurements of that portion of the goods item in the equipment.

2380 EQN, Number of units

A segment to specify the number of equipment units to each of which the given measurement applies.

2390 Segment Group 54: TCC-CUX-PRI-EQN-PCD-MOA-QTY-LOC

A group of segments to specify charge associated with the goods item.

2400 TCC, Transport charge/rate calculations

A segment to specify charge associated with the goods item.

2410 CUX, Currencies

A segment to specify the currency associated with a freight charge.

2420 PRI, Price details

A segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilograms).

2430 EQN, Number of units

A segment to specify the number of units to which the unit price basis applies.

2440 PCD, Percentage details

A segment to indicate the applicable reduction or surcharge percentage details.

2450 MOA, Monetary amount

A segment to specify a monetary amount, such as prepaid amount, discount or total amount.

2460 QTY, Quantity

A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight.

2470 LOC, Place/location identification

A segment to indicate location where a specific function will be performed.

2480 Segment Group 55: DGS-FTX-SG56-SG57-SG58

A group of segments to specify dangerous goods details related to the goods item. One goods item may be in different dangerous goods classes.

2490 DGS, Dangerous goods

A segment to indicate the class of dangerous goods, packing group, etc.

2500 FTX, Free text

A segment to specify the dangerous goods technical name and to specify any additional dangerous goods information.

2510 Segment Group 56: CTA-COM

A group of segments to identify a contact to whom communication regarding the dangerous goods can be directed.

2520 CTA, Contact information

A segment to identify a person or department.

2530 COM, Communication contact

A segment to identify a communication number of a person or department.

2540 Segment Group 57: MEA-EQN

A group of segments to identify dangerous goods measurements.

2550 MEA, Measurements

A segment to specify measurements of the dangerous goods.

2560 EQN, Number of units

A segment to specify the number of equipment units to each of which the given measurement applies.

2570 Segment Group 58: SGP-SG59

A group of segments to specify the distribution of the dangerous goods among the transport equipment.

2580 SGP, Split goods placement

A segment to identify the equipment in which the dangerous goods are transported.

2590 Segment Group 59: MEA-EQN

A group of segments to identify dangerous goods measurements.

2600 MEA, Measurements

A segment to specify measurements of that portion of the dangerous goods in the equipment.

2610 EQN, Number of units

A segment to specify the number of equipment units to each of which the given measurement applies.

2620 Segment Group 60: EQD-EQN-TMD-MEA-DIM-SEL-TPL-HAN-TMP-FTX-

PCD-SG61-SG62-SG63 A group of segments to specify equipment in which goods are

2630 EQD, Equipment details

A segment to specify equipment, and equipment size and type used in the transport.

2640 EQN, Number of units

A segment to specify number of pieces of equipment required.

2650 TMD, Transport movement details

A segment to specify transport movement details for the equipment.

2660 MEA, Measurements

A segment to specify measurements, other than dimensions, associated with the equipment, such as weight.

2670 DIM, Dimensions

A segment to specify dimensions applicable to equipment.

2680 SEL, Seal number

A segment to identify seal and seal issuer associated with the equipment.

2690 TPL, Transport placement

A segment to identify transport details for the equipment.

2700 HAN, Handling instructions

A segment to specify handling instructions for specified equipment.

2710 TMP, Temperature

A segment to specify a temperature setting for the equipment.

2720 FTX, Free text

A segment to specify processable supplementary information associated with the equipment.

2730 + PCD, Percentage details

A segment to specify percentages related to the equipment such as percentage humidity.

2740 Segment Group 61: TCC-CUX-PRI-EQN-PCD-MOA-QTY

A group of segments to specify charges associated with the equipment.

2750 TCC, Transport charge/rate calculations

A segment to specify a charge associated with the equipment.

2760 + CUX, Currencies

A segment to specify currency details related to the freight charge.

2770 PRI, Price details

A segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilograms).

2780 EQN, Number of units

A segment to specify the number of units to which the unit price basis applies.

2790 PCD, Percentage details

A segment to indicate the applicable reduction or surcharge percentage details.

2800 MOA, Monetary amount

A segment to specify a monetary amount, such as prepaid amount, discount or total amount.

2810 QTY, Quantity

A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight.

2820 Segment Group 62: NAD-DTM

A group of segments to identify different equipment pick-up or drop-off places.

2830 NAD, Name and address

A segment to specify a pick-up or drop-off address.

2840 DTM, Date/time/period

A segment to indicate date and time relating to pick-up or drop-off.

2850 Segment Group 63: EQA-EQN

A group of segments to specify the attached equipment and related number of pieces.

2860 EQA, Attached equipment

A segment to identify attached or related equipment such as a chassis attached to a container.

2870 EQN, Number of units

A segment to specify number of pieces of equipment required.

2880 UNT, Message trailer

A service segment ending a message, giving the total number of segments in the message and the control reference number of the message.


4.2. Data segment index (Alphabetical sequence by tag)

BGM Beginning of message
CNI Consignment information
CNT Control total
COM Communication contact
CPI Charge payment instructions
CTA Contact information
CUX Currencies
DGS Dangerous goods
DIM Dimensions
DOC Document/message details
DTM Date/time/period
EQA Attached equipment
EQD Equipment details
EQN Number of units
FTX Free text
GDS Nature of cargo
GID Goods item details
GIN Goods identity number
GOR Governmental requirements
HAN Handling instructions
LOC Place/location identification
MEA Measurements
MOA Monetary amount
NAD Name and address
PCD Percentage details
PCI Package identification
PIA Additional product id
PRI Price details
QTY Quantity
RFF Reference
RNG Range details
SEL Seal number
SEQ Sequence details
SGP Split goods placement
TCC Transport charge/rate calculations
TDT Details of transport
TMD Transport movement details
TMP Temperature
TOD Terms of delivery or transport
TPL Transport placement
TSR Transport service requirements
UNH Message header
UNT Message trailer

4.3. Message structure


4.3.1. Segment table

├─UNH Message header ×1 (M)
├─BGM Beginning of message ×1 (M)
├─DTM Date/time/period ×9 (C)
├─MOA Monetary amount ×99 (C)
├─FTX Free text ×99 (C)
├─CNT Control total ×9 (C)
├─Segment Group 1 ×9 (C)
├─RFF Reference ×1 (M)
└─DTM Date/time/period ×9 (C)
├─Segment Group 2 ×9 (C)
├─GOR Governmental requirements ×1 (M)
├─DTM Date/time/period ×9 (C)
├─LOC Place/location identification ×9 (C)
├─SEL Seal number ×9 (C)
├─FTX Free text ×9 (C)
└─Segment Group 3 ×9 (C)
──├─DOC Document/message details ×1 (M)
──└─DTM Date/time/period ×1 (C)
├─Segment Group 4 ×9 (C)
├─NAD Name and address ×1 (M)
├─Segment Group 5 ×9 (C)
├─CTA Contact information ×1 (M)
└─COM Communication contact ×9 (C)
└─Segment Group 6 ×9 (C)
──├─RFF Reference ×1 (M)
──└─DTM Date/time/period ×9 (C)
├─Segment Group 7 ×9 (C)
├─TCC Transport charge/rate calculations ×1 (M)
├─CUX Currencies ×1 (C)
├─PRI Price details ×1 (C)
├─EQN Number of units ×1 (C)
├─PCD Percentage details ×1 (C)
├─MOA Monetary amount ×9 (C)
├─QTY Quantity ×9 (C)
└─LOC Place/location identification ×9 (C)
├─Segment Group 8 ×9 (C)
├─TDT Details of transport ×1 (M)
├─TSR Transport service requirements ×9 (C)
├─LOC Place/location identification ×9 (C)
├─DTM Date/time/period ×9 (C)
├─SEL Seal number ×9 (C)
├─FTX Free text ×9 (C)
├─Segment Group 9 ×9 (C)
├─MEA Measurements ×1 (M)
└─EQN Number of units ×1 (C)
├─Segment Group 10 ×9 (C)
├─DIM Dimensions ×1 (M)
└─EQN Number of units ×1 (C)
├─Segment Group 11 ×9 (C)
├─CTA Contact information ×1 (M)
└─COM Communication contact ×9 (C)
└─Segment Group 12 ×9 (C)
──├─NAD Name and address ×1 (M)
──├─LOC Place/location identification ×9 (C)
──├─Segment Group 13 ×9 (C)
──├─CTA Contact information ×1 (M)
──└─COM Communication contact ×9 (C)
──├─Segment Group 14 ×9 (C)
──├─DOC Document/message details ×1 (M)
──└─DTM Date/time/period ×1 (C)
──├─Segment Group 15 ×9 (C)
──├─TCC Transport charge/rate calculations ×1 (M)
──├─CUX Currencies ×1 (C)
──├─PRI Price details ×1 (C)
──├─EQN Number of units ×1 (C)
──├─PCD Percentage details ×1 (C)
──├─MOA Monetary amount ×9 (C)
──└─QTY Quantity ×9 (C)
──└─Segment Group 16 ×9 (C)
────├─RFF Reference ×1 (M)
────└─DTM Date/time/period ×9 (C)
├─Segment Group 17 ×999 (C)
├─EQD Equipment details ×1 (M)
├─EQN Number of units ×1 (C)
├─TPL Transport placement ×1 (C)
├─TMD Transport movement details ×1 (C)
├─MEA Measurements ×9 (C)
├─DIM Dimensions ×9 (C)
├─SEL Seal number ×9 (C)
├─NAD Name and address ×9 (C)
├─LOC Place/location identification ×9 (C)
├─HAN Handling instructions ×1 (C)
├─TMP Temperature ×1 (C)
├─FTX Free text ×9 (C)
├─RFF Reference ×9 (C)
├─PCD Percentage details ×9 (C)
└─Segment Group 18 ×99 (C)
──├─EQA Attached equipment ×1 (M)
──└─EQN Number of units ×1 (C)
├─Segment Group 19 ×9999 (C)
├─CNI Consignment information ×1 (M)
├─Segment Group 20 ×9 (C)
├─SGP Split goods placement ×1 (M)
└─Segment Group 21 ×9 (C)
──├─MEA Measurements ×1 (M)
──└─EQN Number of units ×1 (C)
├─Segment Group 22 ×9 (C)
├─TPL Transport placement ×1 (M)
└─Segment Group 23 ×9 (C)
──├─MEA Measurements ×1 (M)
──└─EQN Number of units ×1 (C)
├─CTA Contact information ×1 (C)
├─COM Communication contact ×9 (C)
├─DTM Date/time/period ×9 (C)
├─CNT Control total ×9 (C)
├─TSR Transport service requirements ×9 (C)
├─CUX Currencies ×9 (C)
├─MOA Monetary amount ×99 (C)
├─FTX Free text ×99 (C)
├─Segment Group 24 ×99 (C)
├─LOC Place/location identification ×1 (M)
└─DTM Date/time/period ×9 (C)
├─Segment Group 25 ×2 (C)
├─TOD Terms of delivery or transport ×1 (M)
└─LOC Place/location identification ×9 (C)
├─Segment Group 26 ×999 (C)
├─RFF Reference ×1 (M)
└─DTM Date/time/period ×9 (C)
├─Segment Group 27 ×9 (C)
├─GOR Governmental requirements ×1 (M)
├─DTM Date/time/period ×9 (C)
├─LOC Place/location identification ×9 (C)
├─SEL Seal number ×9 (C)
├─FTX Free text ×9 (C)
└─Segment Group 28 ×9 (C)
──├─DOC Document/message details ×1 (M)
──└─DTM Date/time/period ×1 (C)
├─Segment Group 29 ×9 (C)
├─CPI Charge payment instructions ×1 (M)
├─RFF Reference ×99 (C)
├─CUX Currencies ×1 (C)
├─LOC Place/location identification ×9 (C)
└─MOA Monetary amount ×9 (C)
├─Segment Group 30 ×99 (C)
├─TCC Transport charge/rate calculations ×1 (M)
├─LOC Place/location identification ×1 (C)
├─FTX Free text ×1 (C)
├─CUX Currencies ×1 (C)
├─PRI Price details ×1 (C)
├─EQN Number of units ×1 (C)
├─PCD Percentage details ×1 (C)
├─MOA Monetary amount ×9 (C)
└─QTY Quantity ×9 (C)
├─Segment Group 31 ×99 (C)
├─TDT Details of transport ×1 (M)
├─DTM Date/time/period ×9 (C)
├─TSR Transport service requirements ×9 (C)
├─Segment Group 32 ×99 (C)
├─LOC Place/location identification ×1 (M)
└─DTM Date/time/period ×9 (C)
└─Segment Group 33 ×9 (C)
──├─RFF Reference ×1 (M)
──└─DTM Date/time/period ×1 (C)
├─Segment Group 34 ×99 (C)
├─NAD Name and address ×1 (M)
├─LOC Place/location identification ×9 (C)
├─MOA Monetary amount ×9 (C)
├─Segment Group 35 ×9 (C)
├─CTA Contact information ×1 (M)
└─COM Communication contact ×9 (C)
├─Segment Group 36 ×9 (C)
├─DOC Document/message details ×1 (M)
└─DTM Date/time/period ×1 (C)
├─Segment Group 37 ×99 (C)
├─TCC Transport charge/rate calculations ×1 (M)
├─CUX Currencies ×1 (C)
├─PRI Price details ×1 (C)
├─EQN Number of units ×1 (C)
├─PCD Percentage details ×1 (C)
├─MOA Monetary amount ×9 (C)
└─QTY Quantity ×9 (C)
├─Segment Group 38 ×9 (C)
├─RFF Reference ×1 (M)
└─DTM Date/time/period ×9 (C)
├─Segment Group 39 ×9 (C)
├─CPI Charge payment instructions ×1 (M)
├─RFF Reference ×99 (C)
├─CUX Currencies ×1 (C)
├─LOC Place/location identification ×9 (C)
└─MOA Monetary amount ×9 (C)
└─Segment Group 40 ×99 (C)
──├─TSR Transport service requirements ×1 (M)
──├─RFF Reference ×1 (C)
──├─LOC Place/location identification ×1 (C)
──├─TPL Transport placement ×1 (C)
──└─FTX Free text ×9 (C)
├─Segment Group 41 ×999 (C)
├─GID Goods item details ×1 (M)
├─HAN Handling instructions ×1 (C)
├─TMP Temperature ×1 (C)
├─RNG Range details ×1 (C)
├─TMD Transport movement details ×1 (C)
├─LOC Place/location identification ×9 (C)
├─MOA Monetary amount ×9 (C)
├─PIA Additional product id ×9 (C)
├─GIN Goods identity number ×99 (C)
├─FTX Free text ×9 (C)
├─Segment Group 42 ×9 (C)
├─NAD Name and address ×1 (M)
└─DTM Date/time/period ×1 (C)
├─GDS Nature of cargo ×9 (C)
├─Segment Group 43 ×99 (C)
├─MEA Measurements ×1 (M)
└─EQN Number of units ×1 (C)
├─Segment Group 44 ×99 (C)
├─DIM Dimensions ×1 (M)
└─EQN Number of units ×1 (C)
├─Segment Group 45 ×9 (C)
├─RFF Reference ×1 (M)
└─DTM Date/time/period ×9 (C)
├─Segment Group 46 ×999 (C)
├─PCI Package identification ×1 (M)
├─RFF Reference ×1 (C)
├─DTM Date/time/period ×1 (C)
└─GIN Goods identity number ×9 (C)
├─Segment Group 47 ×9 (C)
├─DOC Document/message details ×1 (M)
└─DTM Date/time/period ×9 (C)
├─Segment Group 48 ×9 (C)
├─GOR Governmental requirements ×1 (M)
├─DTM Date/time/period ×9 (C)
├─LOC Place/location identification ×9 (C)
├─SEL Seal number ×9 (C)
├─FTX Free text ×9 (C)
└─Segment Group 49 ×9 (C)
──├─DOC Document/message details ×1 (M)
──└─DTM Date/time/period ×1 (C)
├─Segment Group 50 ×9 (C)
├─TPL Transport placement ×1 (M)
└─Segment Group 51 ×9 (C)
──├─MEA Measurements ×1 (M)
──└─EQN Number of units ×1 (C)
├─Segment Group 52 ×999 (C)
├─SGP Split goods placement ×1 (M)
├─SEQ Sequence details ×1 (C)
└─Segment Group 53 ×9 (C)
──├─MEA Measurements ×1 (M)
──└─EQN Number of units ×1 (C)
├─Segment Group 54 ×99 (C)
├─TCC Transport charge/rate calculations ×1 (M)
├─CUX Currencies ×1 (C)
├─PRI Price details ×1 (C)
├─EQN Number of units ×1 (C)
├─PCD Percentage details ×1 (C)
├─MOA Monetary amount ×9 (C)
├─QTY Quantity ×9 (C)
└─LOC Place/location identification ×9 (C)
└─Segment Group 55 ×9 (C)
──├─DGS Dangerous goods ×1 (M)
──├─FTX Free text ×99 (C)
──├─Segment Group 56 ×9 (C)
──├─CTA Contact information ×1 (M)
──└─COM Communication contact ×9 (C)
──├─Segment Group 57 ×9 (C)
──├─MEA Measurements ×1 (M)
──└─EQN Number of units ×1 (C)
──└─Segment Group 58 ×999 (C)
────├─SGP Split goods placement ×1 (M)
────└─Segment Group 59 ×9 (C)
──────├─MEA Measurements ×1 (M)
──────└─EQN Number of units ×1 (C)
└─Segment Group 60 ×999 (C)
──├─EQD Equipment details ×1 (M)
──├─EQN Number of units ×1 (C)
──├─TMD Transport movement details ×1 (C)
──├─MEA Measurements ×9 (C)
──├─DIM Dimensions ×9 (C)
──├─SEL Seal number ×99 (C)
──├─TPL Transport placement ×9 (C)
──├─HAN Handling instructions ×1 (C)
──├─TMP Temperature ×1 (C)
──├─FTX Free text ×9 (C)
──├─PCD Percentage details ×9 (C)
──├─Segment Group 61 ×99 (C)
──├─TCC Transport charge/rate calculations ×1 (M)
──├─CUX Currencies ×1 (C)
──├─PRI Price details ×1 (C)
──├─EQN Number of units ×1 (C)
──├─PCD Percentage details ×1 (C)
──├─MOA Monetary amount ×9 (C)
──└─QTY Quantity ×9 (C)
──├─Segment Group 62 ×9 (C)
──├─NAD Name and address ×1 (M)
──└─DTM Date/time/period ×1 (C)
──└─Segment Group 63 ×99 (C)
────├─EQA Attached equipment ×1 (M)
────└─EQN Number of units ×1 (C)
└─UNT Message trailer ×1 (M)

5. Annex A Example (Details of transport)

1. TDT+20+HL12345+1:MARITIME+:CONTAINER VESSEL+:::HAPAG LLOYD+++PHXXX:::FAITHFUL' Notes: 20 indicates 'main transport' (d.e. 8051); HL12345 is assigned by the carrier (d.e. 8028; is the 'flight number' in the air mode); PHXXX is the radio call sign (d.e. 8213); 'FAITHFUL' is the name of the vessel

2. TDT+20+91/05/0021+3:ROAD++:::INT. TRUCKING CO.+++BB-10-XX::::NL' Note: BB-10-XX represents the (Dutch) truck registration no.


Return to Stylus Studio EDIFACT D97B Messages page.
EDI to XML Mapping for EDIFACT/X12 Convert EDIFACT/X12 Schemas to XML Schema Legacy Data Conversion Tools Access Relational Data as XML Visual XSLT and XQuery Mapping Tools EDIFACT to XML
Return to Stylus Studio EDIFACT home page.

Return to Stylus Studio home page.
Site Map | Privacy Policy | Terms of Use | Trademarks
Stylus Scoop XML Newsletter:
W3C Member
Stylus Studio® and DataDirect XQuery ™are from DataDirect Technologies, is a registered trademark of Progress Software Corporation, in the U.S. and other countries. © 2004-2016 All Rights Reserved.