Frames | No Frames

Return to Stylus Studio EDIFACT home page.
Return to Stylus Studio EDIFACT D97A Messages page.
UN/EDIFACT
UNITED NATIONS STANDARD MESSAGE (UNSM)

Purchase order change request message

Version:D
Release:97A
Contr. Agency:UN
Revision:6
Date:96-12-13
SOURCE:Submitted by WEEB-MD1 on behalf of PAEB

CONTENTS
Purchase order change request message
  1. INTRODUCTION
  2. SCOPE
    1. Functional definition
    2. Field of application
    3. Principles
  3. REFERENCES
  4. TERMS AND DEFINITIONS
    1. Standard terms and definitions
  5. MESSAGE DEFINITION
    1. Data segment clarification
      1. Header section
      2. Detail section
      3. Summary section
    2. Data segment index (alphabetical sequence)
    3. Message structure
      1. Segment table
  6. ANNEX

For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.6, UN/ECE UNSM General Introduction


This message also occurs in the following versions of this standard:
D93A, D94A, D94B, D95A, D95B, D96A, D96B, D97A, D97B, D98A, D98B, D99A, D99B, D00A, D00B, D01A, D01B, D01C, D02A, D02B, D03A, D03B, D04A, D04B

0. INTRODUCTION

This specification provides the definition of the Purchase order change request message (ORDCHG) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport.


1. SCOPE


1.1. Functional Definition

A message from the buyer to the seller, specifying details of the buyer's request to change a purchase order.


1.2. Field of Application

The UN Standard Purchase Order Change Message may be applied for both national and international trade. It is based on universal commercial practice and is not dependent on the type of business or industry.


1.3. Principles

A buyer may request to change, or eventually cancel one or more goods items or services.

A purchase order change request may refer to goods items or services related to one or more delivery schedules, call-offs, etc.

A purchase order change request for cross-border transactions may contain additional information for customs and/or statistical purposes.

A purchase order change request may contain details for transport and destination as well as delivery patterns.


2. REFERENCES

See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 1.


3. TERMS AND DEFINITIONS


3.1. Standard terms and definitions

See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 2.


4. MESSAGE DEFINITION


4.1. Data Segment Clarification

This section should be read in conjunction with the Segment Table which indicate mandatory, conditional and repeating requirements.

For guidance, the following principles serve to remove ambiguity in the application of an EDI Purchase Order Change.

All specified dates/times should be in the format 'yymmdd'/'hhmm' unless all parties involved in the transaction agree that there is a functional requirement for an alternative format. Periods should be specified as whole numbers representing the required period as indicated in the format qualifier (weeks, months, etc.).

Where a choice of code or text is given only the code element should be used wherever possible.

Conditional data that is not required in the message should not be included.

Care must be taken that the segment qualifier in dependent segments do not conflict with the segment qualifier of the trigger segment of a group.

Free text information within the message should be avoided as this inhibits automatic processing.


4.1.1. Header section

Information to be provided in the Header section:

The heading section of ORDCHG message contains the same segments in the same sequence as the ORDERS and ORDRSP messages. The actual use of these segments in the ORDCHG message is depending upon the value of the MESSAGE FUNCTION CODE (D/E 1225) of the BGM segment.

0010 UNH, Message header

A service segment starting and uniquely identifying a message. The message type code for the Purchase order change request message is ORDCHG.

Note: Purchase order change request messages conforming to this document must contain the following data in segment UNH, composite S009:

Data element0065ORDCHG
0052D
005497A
0051UN

0020 BGM, Beginning of message

A segment by which the sender must uniquely identify the order change by means of its number and when necessary its function.

0030 DTM, Date/time/period

A segment specifying general dates and, when relevant, times related to the whole order or order change message. The segment must be specified at least once to identify the order change date.

Examples of the use of this DTM segment are: Lead times that apply to the whole of the order and, if no schedule is to be specified, the delivery date.

The Date/time/period segment within other Segment group should be used whenever the date/time/period requires to be logically related to another specified data item. e.g. schedule dates are specified within Segment group 47.

0040 PAI, Payment instructions

A segment changing conditions of payment, guarantee and method of payment for the whole order. An example of the use of this segment is to specify that a documentary credit will be used.

0050 ALI, Additional information

A segment indicating special conditions related to the total order change owing to origin, customs preference, or other commercial factors.

0060 IMD, Item description

A segment providing a description common to all line items of the order change.

0070 FTX, Free text

A segment with free text information, in coded or clear form, used when additional information is needed but cannot be accommodated within other segments. In computer to computer exchanges such text will normally require the receiver to process this segment manually.

0080 Segment Group 1: RFF-DTM

A group of segments for giving references and where necessary, their dates, relating to the whole message, e.g. contract number, import/export license number, reservation number.

0090 RFF, Reference

A segment identifying the reference by its number and where appropriate a line number within that document.

0100 DTM, Date/time/period

A segment specifying the date/time related to the reference.

0110 Segment Group 2: AJT-FTX

A segment group to give information about adjustments.

0120 AJT, Adjustment details

A segment giving adjustment details.

0130 FTX, Free text

A segment giving additional information on the adjustment.

0140 Segment Group 3: NAD-LOC-FII-SG4-SG5-SG6

A group of segments identifying the parties with associated information.

0150 NAD, Name and address

A segment identifying names and addresses of the parties, in coded or clear form, and their functions relevant to the order change. Identification of the seller and buyer parties is mandatory for the order change message.

It is recommended that where possible only the coded form of the party ID should be specified. i.e. The Buyer and Seller are known to each other, and only the coded format is required. Consignee or Delivery addresses may vary and would have to be completely specified, preferably in structured format.

0160 LOC, Place/location identification

A segment giving more specific locations of the party specified in the NAD segment e.g. internal site/building number.

0170 FII, Financial institution information

A segment identifying the financial institution (e.g. bank) and relevant account numbers for the seller, buyer and where necessary other parties. e.g. the buyer may provide a choice of financial institutions for direct debit purposes.

0180 Segment Group 4: RFF-DTM

A group of segments giving references only relevant to the specified party rather than the whole order change.

0190 RFF, Reference

A segment identifying the reference by its number and where appropriate a line number within a document.

0200 DTM, Date/time/period

A segment specifying the date and/or time related to the reference.

0210 Segment Group 5: DOC-DTM

A group of segments identifying documentary requirements.

0220 DOC, Document/message details

A segment identifying and providing information relating to the documents required by the party specified in the NAD segment. For example, the party may require a Certificate of Analysis.

0230 DTM, Date/time/period

A segment specifying the date and/or time of the document.

0240 Segment Group 6: CTA-COM

A group of segments giving contact details of the specific person or department within the party identified in the NAD segment.

0250 CTA, Contact information

A segment to identify a person or department, and their function, to whom communications should be directed.

0260 COM, Communication contact

A segment to identify a communications type and number for the contact specified in the CTA segment.

0270 Segment Group 7: TAX-MOA-LOC

A group of segments specifying tax related information, and when necessary, the location(s) to which that tax information relates.

0280 TAX, Duty/tax/fee details

A segment specifying a tax type, category and rate, or exemption, relating to the whole order change e.g. Value Added Tax at the standard rate is applicable for all items.

0290 MOA, Monetary amount

A segment specifying the amount for the identified duty/tax/fee.

0300 LOC, Place/location identification

A segment indicating the location to which the tax or exemption specified in the TAX segment applies, e.g. city or state or country.

0310 Segment Group 8: CUX-PCD-DTM

A group of segments specifying the currencies and related dates/periods valid for the whole order change. Currency data may be omitted in national applications but will be required for international transactions.

0320 CUX, Currencies

A segment identifying the currencies required in the order change, e.g. the order currency. A rate of exchange may be given to convert a reference currency into a target currency.

0330 PCD, Percentage details

A segment specifying the fluctuation beyond those limits will allow one or either party to re-negotiate prices.

0340 DTM, Date/time/period

A segment specifying the date/time/period related to the rate of exchange.

0350 Segment Group 9: PAT-DTM-PCD-MOA

A group of segments specifying the terms of payment applicable for the whole order change.

0360 PAT, Payment terms basis

A segment identifying the payment terms and date/time basis.

0370 DTM, Date/time/period

A segment giving the specific date/time/period, if needed, of any payments, discounts, instalments etc.

0380 PCD, Percentage details

A segment specifying the discount, interest, penalty as well as instalment percentage.

0390 MOA, Monetary amount

A segment specifying amounts related to payment discounts, penalties or instalments.

0400 Segment Group 10: TDT-SG11

A group of segments identifying the mode and means of transport, location and relevant dates and times for transportation, relating to the whole order change.

0410 TDT, Details of transport

A segment specifying the mode, means and identification of the transport for the goods being ordered.

0420 Segment Group 11: LOC-DTM

A group of segments giving the location and date/time/period information relative to the transportation.

0430 LOC, Place/location identification

A segment identifying locations relevant to the transport specified in the TDT segment. e.g. place of departure or border crossing point.

0440 DTM, Date/time/period

A segment identifying the date/time/period details of departure and/or arrival of the transported goods for the specified location.

0450 Segment Group 12: TOD-LOC

A group of segments indicating the terms of delivery for the whole order change.

0460 TOD, Terms of delivery or transport

A segment identifying the delivery terms to be used. e.g. UN/ECE INCOTERMS codes can be used to specify the delivery terms.

0470 LOC, Place/location identification

A segment identifying locations relevant to the delivery terms specified in the TOD segment.

0480 Segment Group 13: PAC-MEA-SG14

A group of segments identifying the packaging, physical dimensions and marks and numbers for goods referenced by the whole order change.

0490 PAC, Package

A segment specifying the number and type of packages for the whole order change, e.g. number and type of pallets.

0500 MEA, Measurements

A segment specifying physical measurements of packages described in the PAC segment, e.g. package length or weight.

0510 Segment Group 14: PCI-RFF-DTM-GIN

A group of segments specifying the markings and labels on individual physical units.

0520 PCI, Package identification

A segment specifying markings and labels used on individual physical units (packages) described in the PAC segment.

0530 RFF, Reference

A segment identifying the master label number.

0540 DTM, Date/time/period

A segment specifying the dates relevant to the package markings.

0550 GIN, Goods identity number

A segment identifying the number or ranges of numbers for use with the package markings.

0560 Segment Group 15: EQD-HAN-MEA-FTX

A group of segments providing information relating to equipment identification and ownership, handling and identification of hazardous materials, relating to the whole order change.

0570 EQD, Equipment details

A segment to define information regarding equipment to be used in conjunction with the whole order change, and if required, to indicate responsibility for supplying of the equipment.

0580 HAN, Handling instructions

A segment providing information on required handling of materials and additionally, if required, identifying hazardous materials in the whole order change.

0590 MEA, Measurements

A segment providing measurement information for the equipment.

0600 FTX, Free text

A segment with free text information, in coded or clear form, used when additional information is needed but cannot be accommodated within other segments. In computer to computer exchanges such text will normally require the receiver to process this segment manually.

0610 Segment Group 16: SCC-FTX-RFF-SG17

A group of segments specifying requested delivery schedules relating to quantities, frequencies, dates and references, required for the whole order change.

0620 SCC, Scheduling conditions

A segment specifying the type and status of the schedule being given, and optionally defining a pattern to be established, e.g. firm or proposed delivery schedule for a weekly pattern.

0630 FTX, Free text

A segment with free text information, in coded or clear form, to give further clarification to scheduling instructions. In computer to computer exchanges such text will normally require the receiver to process this segment manually.

0640 RFF, Reference

A segment for specifying the reference for a schedule.

0650 Segment Group 17: QTY-DTM

A group of segments to specify the scheduled quantities, date/time/period of the schedule.

0660 QTY, Quantity

A segment to specify pertinent quantities relating to the schedule and pattern established in the SCC segment, i.e. delivery quantity.

0670 DTM, Date/time/period

A segment indicating the date/time/period details relating to the quantity, e.g. start and end dates for a delivery pattern, or delivery window.

0680 Segment Group 18: APR-DTM-RNG

A group of segments providing information concerning pricing related to the type of trade, and, where appropriate, indication of quantities, dates/periods or amounts.

0690 APR, Additional price information

A segment to identify additional pricing information such as a price multiplier, the class or type of trade and additionally identifying the reason for any changes.

0700 DTM, Date/time/period

A segment to identify the date/time/period information related to the price change. e.g. period of validity.

0710 RNG, Range details

A segment to identify the quantity or amount ranges to which the additional price information applies.

0720 Segment Group 19: ALC-ALI-DTM-SG20-SG21-SG22-SG23-SG24

A group of segments specifying allowances and charges for the whole order change. The allowance or charge specified within this Segment group may either relate to the total order change in which case it cannot be overridden at detail level, or it can relate to the line items as a default allowance/charge and can be overridden by the ALC Segment group within the Detail section. Where relevant, additional information, tax and alternate currency details are to be indicated in the TAX and MOA segments. The allowance/charge may be a quantity, a percentage, an amount or a rate and one of the Segment group 19-22 should be used accordingly.

0730 ALC, Allowance or charge

A segment identifying the charge or allowance and, where necessary its calculation sequence.

0740 ALI, Additional information

A segment indicating that the allowance or charge specified is subject to special conditions owing to origin, customs preference or commercial factors.

0750 DTM, Date/time/period

A segment to identify the date/time/period information related to the allowance or charge, e.g. period of validity.

0760 Segment Group 20: QTY-RNG

A group of segments specifying the quantity of the allowance or charge with its measure unit specifier. A range to which the allowance or charge applies may be specified, e.g. an allowance of a free quantity of 20 pieces may be specified if the goods quantity ordered is greater than 1000 pieces.

0770 QTY, Quantity

A segment identifying the type of quantity and the quantity related to the allowance or charge.

0780 RNG, Range details

A segment specifying, if required, the range to which the allowance or charge applies.

0790 Segment Group 21: PCD-RNG

A group of segments specifying the percentage for the allowance or charge, e.g. The allowance/charge amount is calculated as 5% of the goods value or a price reduction of 5% may be specified if the goods quantity ordered is within the range of 5 tons to 10 tons.

0800 PCD, Percentage details

A segment identifying the percentage and the percentage basis for the calculation of the allowance or charge.

0810 RNG, Range details

A segment specifying, if required, a range for the application of the percentage.

0820 Segment Group 22: MOA-RNG

A group of segments specifying a monetary amount for an allowance or charge. A range to which the allowance or charge applies can be specified, e.g. an allowance of 5000 BEF may be specified if goods value ordered is greater than 100000 BEF.

0830 MOA, Monetary amount

A segment identifying monetary amounts for the allowance or charge.

0840 RNG, Range details

A segment specifying, if required, a range for the application of the allowance/charge amount.

0850 Segment Group 23: RTE-RNG

A group of segments specifying the rate per unit and basis to which the allowance or charge applies, e.g. The allowance/charge amount is 3 DEM per 10 tons.

0860 RTE, Rate details

A segment specifying the rate per unit and the basis for calculation.

0870 RNG, Range details

A segment specifying, if required, the range for the application of the allowance/charge rate.

0880 Segment Group 24: TAX-MOA

A group of segments specifying tax related information for the allowance or charge.

0890 TAX, Duty/tax/fee details

A segment specifying the duty/tax/fee type, category and rate, or exemption, related to the allowance or charge.

0900 MOA, Monetary amount

A segment specifying the tax amount for the allowance or charge.

0910 Segment Group 25: RCS-RFF-DTM-FTX

A group of segments identifying any rules, laws or regulations with which the supplier must comply, e.g. building regulations and safety requirements.

0920 RCS, Requirements and conditions

A segment to specify rules, laws and regulations.

0930 RFF, Reference

A segment giving additional document reference by its number and, where appropriate, a line number.

0940 DTM, Date/time/period

A segment indicating the date/time details relating to the references.

0950 FTX, Free text

A segment with free text information, in coded or clear form, used when additional information is needed but cannot be accommodated within other segments. In computer to computer exchanges such text will normally require the receiver to process this segment manually.


4.1.2. Detail section

Information to be provided in the Detail section:

0960 Segment group 26: LIN-PIA-IMD-MEA-QTY-PCD-ALI-DTM-MOA-GIN-GIR- QVR-DOC-PAI-FTX-SG27-SG28-SG29-SG30-SG31- SG32-SG35-SG36-SG37-SG41-SG47-SG49-SG50-SG51- SG53-SG54 A group of segments providing details of the individual line items. This Segment group may be repeated to give sub-line details.

0970 LIN, Line item

A segment identifying the line item with the line number and configuration level, and additionally, identifying the product or service ordered. Other product identification numbers, e.g. Buyer product number, etc., can be specified within the following PIA segment. The D.E. 1229 has to be used.

0980 PIA, Additional product id

A segment providing either additional identification of the product specified in the LIN segment (e.g. Harmonized System number), or provides any substitute product identification.

0990 IMD, Item description

A segment for describing the product or service being ordered as well as product characteristic. This segment should be used for products or services that cannot be fully identified by a product code or item number.

1000 MEA, Measurements

A segment enabling the physical measurements of the ordered item to be specified where this is required for full identification of the product. Any measurements must refer to the product in its unpacked form. e.g. thickness of plastic film, length, weight, etc.

1010 QTY, Quantity

A segment identifying a quantity as specified by the Action Code Request.

1020 PCD, Percentage details

A segment specifying the strength or yield of a product as a percentage, e.g. 80% to indicate the strength of an acid.

1030 ALI, Additional information

A segment indicating that the line item is subject to special conditions owing to origin, customs preference, embargo regulations or others commercial factors.

1040 DTM, Date/time/period

A segment specifying date/time/period details relating to the line item.

1050 MOA, Monetary amount

A segment specifying any monetary amounts relating to the line item, e.g. item amount, insurance value, customs value.

1060 GIN, Goods identity number

A segment providing identity numbers to be applied to the goods being ordered, e.g. serial numbers for assembled equipment.

1070 GIR, Related identification numbers

A segment providing sets of related identification numbers for a line item, e.g. engine numbers, chassis number and transmission number for a vehicle.

1080 QVR, Quantity variances

A segment identifying order quantity variances.

1090 DOC, Document/message details

A segment to indicate that certificate/declaration of origin is required for the ordered article.

1100 PAI, Payment instructions

A segment to indicate that where a central buyer is purchasing on behalf of different consignees, the means of payment may differ for each item/consignee combination as specified in segment group 25.

1110 FTX, Free text

A segment with free text information, in coded or clear form, used when additional information is needed but cannot be accommodated within other segments. In computer to computer exchanges such text will normally require the receiver to process this segment manually.

1120 Segment Group 27: CCI-CAV-MEA

A group of segments providing product characteristic and product characteristic details.

1130 CCI, Characteristic/class id

A segment to identify product characteristic and, or the characteristic name and characteristic relevance for the business process.

1140 CAV, Characteristic value

A segment to specify common product characteristic by value in either coded form or in free format.

1150 MEA, Measurements

A segment indicating characteristic value being physical measurement (including measurable quantities and percentages) related to specified product characteristics (for example voltage, percentage of material contained) and where relevant measurement ranges.

1160 Segment Group 28: PAT-DTM-PCD-MOA

A group of segments specifying the terms of payment applicable for the line item. This may be used by a central buyer purchasing on behalf of different item consignee combinations.

1170 PAT, Payment terms basis

A segment identifying the payment terms and date/time basis.

1180 DTM, Date/time/period

A segment giving the specific date/time/period, if needed, of any payments, discounts, instalments etc.

1190 PCD, Percentage details

A segment specifying the discount, interest, penalty as well as instalment percentage.

1200 MOA, Monetary amount

A segment specifying amounts related to payment discounts, penalties or instalments.

1210 Segment Group 29: AJT-FTX

A segment group to give information about adjustment.

1220 AJT, Adjustment details

A segment giving adjustment details.

1230 FTX, Free text

A segment giving additional information on the adjustment.

1240 Segment Group 30: PRI-CUX-APR-RNG-DTM

A group of segments identifying the relevant pricing information for the goods or services ordered.

1250 PRI, Price details

A segment to specify the price type and amount. The price used in the calculation of the line amount will be identified as 'Unit Price'.

1260 CUX, Currencies

A segment to allow to specify the price in a different currency that the segment group 7.

1270 APR, Additional price information

A segment to identify pricing information such as a price multiplier, the class or type of trade and additionally identifying the reason for any changes.

1280 RNG, Range details

A segment to identify the range (quantity, amount, etc.) to which the additional price information applies.

1290 DTM, Date/time/period

A segment to identify the date/time/period information related to the price change. e.g. period of validity.

1300 Segment Group 31: RFF-DTM

A group of segments giving references and where necessary, their dates, relating to the line item.

1310 RFF, Reference

A segment identifying the reference by its number and where appropriate a line number within that document.

1320 DTM, Date/time/period

A segment specifying the date/time related to the reference.

1330 Segment Group 32: PAC-MEA-QTY-DTM-SG33-SG34

A group of segments identifying the packaging, physical dimensions, and marks and numbers for goods referenced in the line item.

1340 PAC, Package

A segment specifying the number of packages and the physical type of packaging for the line item, e.g. pallet type.

1350 MEA, Measurements

A segment specifying physical measurements of packages described in the PAC segment. e.g. cube or gross weight.

1360 QTY, Quantity

A segment specifying the maximum quantity number of packages which can be stacked safely one on top of another and/or the number of items normally contained within the package.

1370 DTM, Date/time/period

A segment to indicate the validity period in relation to the specified article.

1380 Segment Group 33: RFF-DTM

A segment group to give reference to e.g. a packing instruction document relevant to a particular package type and its date/time/period of issue.

1390 RFF, Reference

A segment identifying the packing instruction document.

1400 DTM, Date/time/period

A segment specifying the dates relevant to the referenced document.

1410 Segment Group 34: PCI-RFF-DTM-GIN

A group of segments specifying the markings and labels on individual physical units.

1420 PCI, Package identification

A segment specifying markings and labels used on individual physical units (packages) described in the PAC segment.

1430 RFF, Reference

A segment identifying the master label number.

1440 DTM, Date/time/period

A segment specifying the dates relevant to the package markings.

1450 GIN, Goods identity number

A segment identifying the number or ranges of numbers for use with the package markings.

1460 Segment Group 35: LOC-QTY-DTM

A group of segments specifying destination and quantity details for consignments involving multi-destination deliveries.

1470 LOC, Place/location identification

A segment indicating the location to which part of the consignment is to be delivered.

1480 QTY, Quantity

A segment specifying the quantity to be delivered to the identified location.

1490 DTM, Date/time/period

A segment specifying the dates and/or times that the delivery should be made.

1500 Segment Group 36: TAX-MOA-LOC

A group of segments specifying duty/tax/fee related information, and when necessary, the location(s) to which that information relates.

1510 TAX, Duty/tax/fee details

A segment specifying a duty/tax/fee type, category and rate, or exemption, relating to the line item.

1520 MOA, Monetary amount

A segment specifying the amount for the identified duty/tax/fee.

1530 LOC, Place/location identification

A segment indicating the location to which the tax or exemption specified in the TAX segment applies, e.g. city or state tax.

1540 Segment Group 37: NAD-LOC-SG38-SG39-SG40

A group of segments identifying the parties with associated information, relevant to the line item only.

1550 NAD, Name and address

A segment identifying names and addresses of the parties, in coded or clear form, and their functions relevant to the order.

1560 LOC, Place/location identification

A segment giving more specific location information of the party specified in the NAD segment e.g. internal site/building number.

1570 Segment Group 38: RFF-DTM

A group of segments giving references only relevant to the specified party.

1580 RFF, Reference

A segment identifying the reference by its number and where appropriate a line number within a document.

1590 DTM, Date/time/period

A segment specifying the date and/or time related to the reference.

1600 Segment Group 39: DOC-DTM

A group of segments identifying the documentary requirements of the specified party.

1610 DOC, Document/message details

A segment identifying and providing information relating to the documents required by the party specified by the NAD segment. For example, the party may require a Certificate of Analysis.

1620 DTM, Date/time/period

A segment specifying the date and/or time of the document.

1630 Segment Group 40: CTA-COM

A group of segments giving contact details of the specific person or department within the party identified in the NAD segment.

1640 CTA, Contact information

A segment to identify a person or department to whom communications should be directed.

1650 COM, Communication contact

A segment to identify a communications type and number for the contact specified in the CTA segment.

1660 Segment Group 41: ALC-ALI-DTM-SG42-SG43-SG44-SG45-SG46

A group of segments specifying allowances and charges for the line item.

1670 ALC, Allowance or charge

A segment identifying the charge or allowance and, where necessary its calculation sequence.

1680 ALI, Additional information

A segment indicating that the allowance or charge specified is subject to special conditions owing to origin, customs preference or commercial factors.

1690 DTM, Date/time/period

A segment to identify the date/time/period information related to the allowance or charge, e.g. period of validity.

1700 Segment Group 42: QTY-RNG

A group of segments specifying the quantity of the allowance or charge with its measure unit specifier. A range to which the allowance or charge applies may be specified, e.g. an allowance of a free quantity of 20 pieces may be specified if the goods quantity ordered is greater than 1000 pieces.

1710 QTY, Quantity

A segment identifying the type of quantity and the quantity related to the allowance or charge.

1720 RNG, Range details

A segment specifying, if required, the range to which the allowance or charge applies.

1730 Segment Group 43: PCD-RNG

A group of segments specifying the percentage for the allowance or charge, e.g. The allowance/charge amount is calculated as 5% of the goods value or a price reduction of 5% may be specified if the goods quantity ordered is within the range 5 tons to 10 tons.

1740 PCD, Percentage details

A segment identifying the percentage and the percentage basis for the calculation of the allowance or charge.

1750 RNG, Range details

A segment specifying, if required, a range for the application of the percentage.

1760 Segment Group 44: MOA-RNG

A group of segments specifying a monetary amount for an allowance or charge and a range to which the allowance or charge applies, e.g. an allowance of 5000 BEF may be specified if goods value ordered is greater than 100000 BEF.

1770 MOA, Monetary amount

A segment identifying the monetary amount for the allowance or charge.

1780 RNG, Range details

A segment specifying, if required, a range for the application of the allowance/charge amount.

1790 Segment Group 45: RTE-RNG

A group of segments specifying the rate per unit and basis to which the allowance or charge applies, e.g. The allowance/charge amount is 3 DEM per 10 tons.

1800 RTE, Rate details

A segment specifying the rate per unit and the basis for calculation.

1810 RNG, Range details

A segment specifying, if required, the range for the application of the allowance/charge rate.

1820 Segment Group 46: TAX-MOA

A group of segments specifying duty/tax/fee related information for the allowance or charge.

1830 TAX, Duty/tax/fee details

A segment specifying the duty/tax/fee type, category and rate, or exemption, related to the allowance or charge.

1840 MOA, Monetary amount

A segment specifying the duty/tax/fee amount for the allowance or charge.

1850 Segment Group 47: TDT-SG48

A group of segments identifying the mode and means of transport, location and relevant dates and times for transportation.

1860 TDT, Details of transport

A segment specifying the mode, means and identification of the transport for the goods item being ordered, where this is different from or not specified within the heading section.

1870 Segment Group 48: LOC-DTM

A group of segments giving the location and date/time information relative to the transportation.

1880 LOC, Place/location identification

A segment identifying locations relevant to the transport specified in the TDT segment.

1890 DTM, Date/time/period

A segment identifying the date/time details of departure and/or arrival of the transported goods for the specified location.

1900 Segment Group 49: TOD-LOC

A group of segments indicating the terms of delivery for the line item.

1910 TOD, Terms of delivery or transport

A segment identifying the delivery terms requested.

1920 LOC, Place/location identification

A segment identifying locations relevant to the delivery terms specified in the TOD segment.

1930 Segment Group 50: EQD-HAN-MEA-FTX

A group of segments providing information relating to equipment identification and ownership, handling and notification of hazardous materials, relating to the line item.

1940 EQD, Equipment details

A segment to define fixed information regarding equipment to be used in conjunction with the ordered item, and if required, to indicate responsibility for supply of the equipment.

1950 HAN, Handling instructions

A segment providing information on required handling of materials and additionally, if required, identifying hazardous materials in the ordered item.

1960 MEA, Measurements

A segment providing measurement information for the equipment.

1970 FTX, Free text

A segment with free text information, in coded or clear form, to give further clarification, when required, to the equipment and handling details. In computer to computer exchanges such text will normally require the receiver to process this segment manually.

1980 Segment Group 51: SCC-FTX-RFF-SG52

A group of segments specifying requested delivery schedules relating to quantities, frequencies, and dates, required for the line item.

1990 SCC, Scheduling conditions

A segment specifying the type and status of the schedule being given, and optionally defining a pattern to be established, e.g. firm or proposed delivery schedule for a weekly pattern.

2000 FTX, Free text

A segment with free text information, in coded or clear form, used when additional information is needed but cannot be accommodated within other segments. In computer to computer exchanges such text will normally require the receiver to process this segment manually.

2010 RFF, Reference

A segment for specifying references relevant to a schedule.

2020 Segment Group 52: QTY-DTM

A group of segments to specify the scheduled quantities, date/time/period of the schedule and where required the reference of the schedule.

2030 QTY, Quantity

A segment to specify pertinent quantities relating to the schedule and pattern established in the SCC segment, i.e. delivery quantity.

2040 DTM, Date/time/period

A segment indicating the date/time details relating to the quantity and schedule details in the SCC/QTY segments. This segment may be repeated to indicate date/time ranges, e.g. start and end dates for a delivery pattern, or delivery window.

2050 Segment Group 53: RCS-RFF-DTM-FTX

A group of segments identifying any rules, laws or regulations with which the supplier must comply, e.g. building regulations, safety requirements, etc.

2060 RCS, Requirements and conditions

A segment to specify industry or national rules, laws and regulation.

2070 RFF, Reference

A segment giving additional document reference by its number and, where appropriate, a line number.

2080 DTM, Date/time/period

A segment indicating the date/time/period relating to the references.

2090 FTX, Free text

A segment with free text information, in coded or clear form, used when additional information is needed but cannot be accommodated within other segments. In computer to computer exchanges such text will normally require the receiver to process this segment manually.

2100 Segment Group 54: STG-SG55

A group of segments indicating information (Quantity and amount) for the calculation of amortization.

2110 STG, Stages

A segment providing information related to the kind of stage in a process, the total number of stages and the current stage.

2120 Segment Group 55: QTY-MOA

A group of segment indicating quantity and monetary amount related to STG.

2130 QTY, Quantity

A segment giving information on quantity related to STG.

2140 MOA, Monetary amount

A segment giving information on monetary amount relating to STG.


4.1.3. Summary section

Information to be provided in the Summary section:

2150 UNS, Section control

A service segment placed at the start of the summary section to avoid segment collision.

2160 MOA, Monetary amount

A segment giving the total amounts for the whole order change message.

2170 CNT, Control total

A segment by which control totals may be provided.

2180 Segment Group 56: ALC-ALI-MOA

A group of segments specifying allowances and charges totals for the order change.

2190 ALC, Allowance or charge

A segment identifying the charge or allowance type being summarised.

2200 ALI, Additional information

A segment indicating that allowance or charge specified is subject to special conditions owing to origin, customs preference or commercial factors.

2210 MOA, Monetary amount

A segment specifying the summary amount for the allowance or charge.

2220 UNT, Message trailer

A service segment ending a message, giving the total number of segments in the message and the control reference number of the message.


4.2. Data segment index (Alphabetical sequence by tag)

AJT Adjustment details
ALC Allowance or charge
ALI Additional information
APR Additional price information
BGM Beginning of message
CAV Characteristic value
CCI Characteristic/class id
CNT Control total
COM Communication contact
CTA Contact information
CUX Currencies
DOC Document/message details
DTM Date/time/period
EQD Equipment details
FII Financial institution information
FTX Free text
GIN Goods identity number
GIR Related identification numbers
HAN Handling instructions
IMD Item description
LIN Line item
LOC Place/location identification
MEA Measurements
MOA Monetary amount
NAD Name and address
PAC Package
PAI Payment instructions
PAT Payment terms basis
PCD Percentage details
PCI Package identification
PIA Additional product id
PRI Price details
QTY Quantity
QVR Quantity variances
RCS Requirements and conditions
RFF Reference
RNG Range details
RTE Rate details
SCC Scheduling conditions
STG Stages
TAX Duty/tax/fee details
TDT Details of transport
TOD Terms of delivery or transport
UNH Message header
UNS Section control
UNT Message trailer

4.3. Message structure


4.3.1. Segment table

├─UNH Message header ×1 (M)
├─BGM Beginning of message ×1 (M)
├─DTM Date/time/period ×35 (M)
├─PAI Payment instructions ×1 (C)
├─ALI Additional information ×5 (C)
├─IMD Item description ×1 (C)
├─FTX Free text ×99 (C)
├─Segment Group 1 ×99 (C)
├─RFF Reference ×1 (M)
└─DTM Date/time/period ×5 (C)
├─Segment Group 2 ×1 (C)
├─AJT Adjustment details ×1 (M)
└─FTX Free text ×5 (C)
├─Segment Group 3 ×99 (C)
├─NAD Name and address ×1 (M)
├─LOC Place/location identification ×25 (C)
├─FII Financial institution information ×5 (C)
├─Segment Group 4 ×10 (C)
├─RFF Reference ×1 (M)
└─DTM Date/time/period ×5 (C)
├─Segment Group 5 ×5 (C)
├─DOC Document/message details ×1 (M)
└─DTM Date/time/period ×5 (C)
└─Segment Group 6 ×5 (C)
──├─CTA Contact information ×1 (M)
──└─COM Communication contact ×5 (C)
├─Segment Group 7 ×5 (C)
├─TAX Duty/tax/fee details ×1 (M)
├─MOA Monetary amount ×1 (C)
└─LOC Place/location identification ×5 (C)
├─Segment Group 8 ×5 (C)
├─CUX Currencies ×1 (M)
├─PCD Percentage details ×5 (C)
└─DTM Date/time/period ×5 (C)
├─Segment Group 9 ×10 (C)
├─PAT Payment terms basis ×1 (M)
├─DTM Date/time/period ×5 (C)
├─PCD Percentage details ×1 (C)
└─MOA Monetary amount ×1 (C)
├─Segment Group 10 ×10 (C)
├─TDT Details of transport ×1 (M)
└─Segment Group 11 ×10 (C)
──├─LOC Place/location identification ×1 (M)
──└─DTM Date/time/period ×5 (C)
├─Segment Group 12 ×5 (C)
├─TOD Terms of delivery or transport ×1 (M)
└─LOC Place/location identification ×2 (C)
├─Segment Group 13 ×10 (C)
├─PAC Package ×1 (M)
├─MEA Measurements ×5 (C)
└─Segment Group 14 ×5 (C)
──├─PCI Package identification ×1 (M)
──├─RFF Reference ×1 (C)
──├─DTM Date/time/period ×5 (C)
──└─GIN Goods identity number ×10 (C)
├─Segment Group 15 ×10 (C)
├─EQD Equipment details ×1 (M)
├─HAN Handling instructions ×5 (C)
├─MEA Measurements ×5 (C)
└─FTX Free text ×5 (C)
├─Segment Group 16 ×10 (C)
├─SCC Scheduling conditions ×1 (M)
├─FTX Free text ×5 (C)
├─RFF Reference ×5 (C)
└─Segment Group 17 ×10 (C)
──├─QTY Quantity ×1 (M)
──└─DTM Date/time/period ×5 (C)
├─Segment Group 18 ×25 (C)
├─APR Additional price information ×1 (M)
├─DTM Date/time/period ×5 (C)
└─RNG Range details ×1 (C)
├─Segment Group 19 ×15 (C)
├─ALC Allowance or charge ×1 (M)
├─ALI Additional information ×5 (C)
├─DTM Date/time/period ×5 (C)
├─Segment Group 20 ×1 (C)
├─QTY Quantity ×1 (M)
└─RNG Range details ×1 (C)
├─Segment Group 21 ×1 (C)
├─PCD Percentage details ×1 (M)
└─RNG Range details ×1 (C)
├─Segment Group 22 ×2 (C)
├─MOA Monetary amount ×1 (M)
└─RNG Range details ×1 (C)
├─Segment Group 23 ×1 (C)
├─RTE Rate details ×1 (M)
└─RNG Range details ×1 (C)
└─Segment Group 24 ×5 (C)
──├─TAX Duty/tax/fee details ×1 (M)
──└─MOA Monetary amount ×1 (C)
├─Segment Group 25 ×100 (C)
├─RCS Requirements and conditions ×1 (M)
├─RFF Reference ×5 (C)
├─DTM Date/time/period ×5 (C)
└─FTX Free text ×5 (C)
├─Segment Group 26 ×20000 (C)
├─LIN Line item ×1 (M)
├─PIA Additional product id ×25 (C)
├─IMD Item description ×99 (C)
├─MEA Measurements ×99 (C)
├─QTY Quantity ×10 (C)
├─PCD Percentage details ×5 (C)
├─ALI Additional information ×5 (C)
├─DTM Date/time/period ×35 (C)
├─MOA Monetary amount ×10 (C)
├─GIN Goods identity number ×1000 (C)
├─GIR Related identification numbers ×1000 (C)
├─QVR Quantity variances ×1 (C)
├─DOC Document/message details ×5 (C)
├─PAI Payment instructions ×1 (C)
├─FTX Free text ×99 (C)
├─Segment Group 27 ×999 (C)
├─CCI Characteristic/class id ×1 (M)
├─CAV Characteristic value ×10 (C)
└─MEA Measurements ×10 (C)
├─Segment Group 28 ×10 (C)
├─PAT Payment terms basis ×1 (M)
├─DTM Date/time/period ×5 (C)
├─PCD Percentage details ×1 (C)
└─MOA Monetary amount ×1 (C)
├─Segment Group 29 ×1 (C)
├─AJT Adjustment details ×1 (M)
└─FTX Free text ×5 (C)
├─Segment Group 30 ×25 (C)
├─PRI Price details ×1 (M)
├─CUX Currencies ×1 (C)
├─APR Additional price information ×1 (C)
├─RNG Range details ×1 (C)
└─DTM Date/time/period ×5 (C)
├─Segment Group 31 ×999 (C)
├─RFF Reference ×1 (M)
└─DTM Date/time/period ×5 (C)
├─Segment Group 32 ×10 (C)
├─PAC Package ×1 (M)
├─MEA Measurements ×5 (C)
├─QTY Quantity ×5 (C)
├─DTM Date/time/period ×5 (C)
├─Segment Group 33 ×1 (C)
├─RFF Reference ×1 (M)
└─DTM Date/time/period ×5 (C)
└─Segment Group 34 ×5 (C)
──├─PCI Package identification ×1 (M)
──├─RFF Reference ×1 (C)
──├─DTM Date/time/period ×5 (C)
──└─GIN Goods identity number ×10 (C)
├─Segment Group 35 ×9999 (C)
├─LOC Place/location identification ×1 (M)
├─QTY Quantity ×1 (C)
└─DTM Date/time/period ×5 (C)
├─Segment Group 36 ×10 (C)
├─TAX Duty/tax/fee details ×1 (M)
├─MOA Monetary amount ×1 (C)
└─LOC Place/location identification ×5 (C)
├─Segment Group 37 ×99 (C)
├─NAD Name and address ×1 (M)
├─LOC Place/location identification ×5 (C)
├─Segment Group 38 ×5 (C)
├─RFF Reference ×1 (M)
└─DTM Date/time/period ×5 (C)
├─Segment Group 39 ×5 (C)
├─DOC Document/message details ×1 (M)
└─DTM Date/time/period ×5 (C)
└─Segment Group 40 ×5 (C)
──├─CTA Contact information ×1 (M)
──└─COM Communication contact ×5 (C)
├─Segment Group 41 ×99 (C)
├─ALC Allowance or charge ×1 (M)
├─ALI Additional information ×5 (C)
├─DTM Date/time/period ×5 (C)
├─Segment Group 42 ×1 (C)
├─QTY Quantity ×1 (M)
└─RNG Range details ×1 (C)
├─Segment Group 43 ×1 (C)
├─PCD Percentage details ×1 (M)
└─RNG Range details ×1 (C)
├─Segment Group 44 ×2 (C)
├─MOA Monetary amount ×1 (M)
└─RNG Range details ×1 (C)
├─Segment Group 45 ×1 (C)
├─RTE Rate details ×1 (M)
└─RNG Range details ×1 (C)
└─Segment Group 46 ×5 (C)
──├─TAX Duty/tax/fee details ×1 (M)
──└─MOA Monetary amount ×1 (C)
├─Segment Group 47 ×10 (C)
├─TDT Details of transport ×1 (M)
└─Segment Group 48 ×10 (C)
──├─LOC Place/location identification ×1 (M)
──└─DTM Date/time/period ×5 (C)
├─Segment Group 49 ×5 (C)
├─TOD Terms of delivery or transport ×1 (M)
└─LOC Place/location identification ×2 (C)
├─Segment Group 50 ×10 (C)
├─EQD Equipment details ×1 (M)
├─HAN Handling instructions ×5 (C)
├─MEA Measurements ×5 (C)
└─FTX Free text ×5 (C)
├─Segment Group 51 ×100 (C)
├─SCC Scheduling conditions ×1 (M)
├─FTX Free text ×5 (C)
├─RFF Reference ×5 (C)
└─Segment Group 52 ×10 (C)
──├─QTY Quantity ×1 (M)
──└─DTM Date/time/period ×5 (C)
├─Segment Group 53 ×100 (C)
├─RCS Requirements and conditions ×1 (M)
├─RFF Reference ×5 (C)
├─DTM Date/time/period ×5 (C)
└─FTX Free text ×5 (C)
└─Segment Group 54 ×10 (C)
──├─STG Stages ×1 (M)
──└─Segment Group 55 ×3 (C)
────├─QTY Quantity ×1 (M)
────└─MOA Monetary amount ×1 (C)
├─UNS Section control ×1 (M)
├─MOA Monetary amount ×12 (C)
├─CNT Control total ×10 (C)
├─Segment Group 56 ×10 (C)
├─ALC Allowance or charge ×1 (M)
├─ALI Additional information ×1 (C)
└─MOA Monetary amount ×2 (M)
└─UNT Message trailer ×1 (M)

Return to Stylus Studio EDIFACT D97A Messages page.
EDI to XML Mapping for EDIFACT/X12 Convert EDIFACT/X12 Schemas to XML Schema Legacy Data Conversion Tools Access Relational Data as XML Visual XSLT and XQuery Mapping Tools Simplify Legacy Data Integration with Stylus Studio XML Enterprise Edition - Free Download!
Return to Stylus Studio EDIFACT home page.

Return to Stylus Studio home page.
Site Map | Privacy Policy | Terms of Use | Trademarks
Stylus Scoop XML Newsletter:
W3C Member
Stylus Studio® and DataDirect XQuery ™are from DataDirect Technologies, is a registered trademark of Progress Software Corporation, in the U.S. and other countries. © 2004-2011 All Rights Reserved.