Frames | No Frames

Return to Stylus Studio EDIFACT home page.
Return to Stylus Studio EDIFACT D97A Messages page.
UN/EDIFACT
UNITED NATIONS STANDARD MESSAGE (UNSM)

Medical service request message

Version:D
Release:97A
Contr. Agency:UN
Revision:1
Date:96-12-13
SOURCE:Western European EDIFACT Board - MD9

CONTENTS
Medical service request message
  1. INTRODUCTION
  2. SCOPE
    1. Functional definition
    2. Field of application
    3. Principles
  3. REFERENCES
  4. TERMS AND DEFINITIONS
    1. Standard terms and definitions
  5. MESSAGE DEFINITION
    1. Data segment clarification
    2. Data segment index (alphabetical sequence)
    3. Message structure
      1. Segment table

For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.6, UN/ECE UNSM General Introduction


This message also occurs in the following versions of this standard:
D96B, D97A, D97B, D98A, D98B, D99A, D99B, D00A, D00B, D01A, D01B, D01C, D02A, D02B, D03A, D03B, D04A, D04B

0. INTRODUCTION

This specification provides the definition of the Medical service request message (MEDREQ) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport.


1. SCOPE


1.1. Functional Definition

A Medical Service Request message is sent from a service requester to the service provider to order investigations, to modify a previous order or ordered investigation or to cancel a previous order.


1.2. Field of Application

The Medical service request message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry.


1.3. Principles

The message fulfills the requirements of the European pre-standard concerning messages for exchange of laboratory information within clinical chemistry, clinical biochemistry, toxicology, clinical immunology, immunohaematology, haematology and clinical microbiology. The message may, however, also be used for other purposes as long as the user requirements are meet.

The CEN prENV New Laboratory Service Order message and the CEN prENV Laboratory Service Order Cancellation message may be considered as special cases of the CEN prENV Laboratory Service Order Modification message. The Laboratory Service Order Modification message may contain a mixture of new, change, cancel and other service types for the order itself and for the various requested investigations whereas the New Laboratory Service Order message only contains the new service type for the order itself and the various requested investigations and the Laboratory Service Order Cancellation message only contains the cancel service type for a complete order.

The overall structure of the message is:

  • One message may include one or more service orders.
  • The service order is connected to one service provider, one service requester and optionally one or more parties to receive copies of the order and/or subsequent result message(s).
  • Every service order is related to one main subject of investigation (patient, animal or material), but may also include information about several related subjects of investigation.
  • Every service order may request services concerning one or more samples (from the same subject of investigation) or the subject of investigation itself.
  • Every sample may have one collection site.
  • A requested investigation may be connected to one or more samples or to the subject of investigation itself.

With the exception of information in FTX segments, all information should primarily be expressed as codes.


2. REFERENCES

See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 1.


3. TERMS AND DEFINITIONS


3.1. Standard terms and definitions

See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 2.


4. MESSAGE DEFINITION


4.1. Data Segment Clarification

This section should be read in conjunction with the Segment Table which indicate mandatory, conditional and repeating requirements.

0010 UNH, Message header

A service segment starting and uniquely identifying a message. The message type code for the Medical service request message is MEDREQ.

Note: Medical service request messages conforming to this document must contain the following data in segment UNH, composite S009:

Data element0065MEDREQ
0052D
005497A
0051UN

0020 BGM, Beginning of message

A segment for unique identification of the message and specification of its function.

0030 DTM, Date/time/period

A segment identifying the date and/or time of message generation and/or other dates and/or times concerning the whole message.

0040 FTX, Free text

A segment giving free text information, in coded or clear form, for specifying information concerning the whole message.

0050 Segment Group 1: PNA-ADR-COM-FTX-RFF-SEQ-LAN-SPR-QUA-EMP

A group of segments giving information about involved healthcare parties like the service requester, the service provider, parties to get copies of the request and/or the results, related service providers, origin of clinical information, supervising healthcare party, healthcare administrative information, sample collector, sample collector location and/or other parties related to the message.

0060 PNA, Party name

A segment for specifying the identification, name and address of involved healthcare organisations or professionals.

0070 ADR, Address

A segment for specifying the address of the actual healthcare party.

0080 COM, Communication contact

A segment giving communication numbers for the actual healthcare party.

0090 FTX, Free text

A segment with free text information, in coded or clear form, for specifying unstructured telecommunication numbers of the actual healthcare party including electronic mail address.

0100 RFF, Reference

A segment for specifying alternative identification numbers of the actual healthcare party assigned by the involved healthcare parties.

This segment also keeps a reference to another party if the current party is related to another party such as department in a hospital, a physician in a department, etc.

0110 SEQ, Sequence details

A segment for allocating a sequence number to the individual healthcare party allowing each healthcare party to be referenced from within the message.

0120 LAN, Language

A segment for specifying the language used by the actual healthcare party.

0130 SPR, Organisation classification details

A segment for specifying the type and medical specialty of a healthcare organisation.

0140 QUA, Qualification

A segment for specifying the professional medical qualifications of a person.

0150 EMP, Employment details

A segment for specifying the type, medical specialty and the position or military rank of a healthcare professional.

0160 Segment Group 2: FCA-GIS-RFF-DTM-PTY-CIN-FTX-LAN-PAC-IRQ-TEM-

HAN-SG3-SG4-SG5 A group of segments for specifying a service order.

0170 FCA, Financial charges allocation

A segment giving information concerning payment category for this order.

0180 GIS, General indicator

A segment to provide the service type of the service order, i.e. new order, order modification etc.

0190 RFF, Reference

A segment for specifying the identification number of the order allocated by various healthcare parties, such as service requester, etc.

The segment is also used for referencing a related healthcare party specified in segment group 1.

0200 DTM, Date/time/period

A segment for specifying the date and/or time concerning the order such as issue date of order, due date of report, etc.

0210 PTY, Priority

A segment for specifying the requested reporting priority for the whole order.

0220 CIN, Clinical information

A segment for specifying the reason for request as well as comments from the requester as a diagnosis concerning this order.

0230 FTX, Free text

A segment with free text information, in coded or clear form, for specifying the reason for request as well as comments from the requester concerning this order.

0240 LAN, Language

A segment for specifying the language of the service order and the requested reporting language.

0250 PAC, Package

A segment for specifying the number of sample containers accompanying a service order.

0260 IRQ, Information required

A segment for specifying the requirements concerning acknowledgment of the service order.

0270 TEM, Test method

A segment for specifying the reason for the request.

0280 HAN, Handling instructions

A segment for specifying the requested commenting level of detail of the service report.

0290 Segment Group 3: SCC-QTY-DTM-FTX

A group of segments for specifying a standing service order.

0300 SCC, Scheduling conditions

A segment for specifying the delivery plan.

0310 QTY, Quantity

A segment for specifying the number of times per time interval a standing order should be performed.

0320 DTM, Date/time/period

A segment for specifying the start and end date and time for set of ordered investigations and the time interval between each repetition.

0330 FTX, Free text

A segment with free text information, in coded or clear form, for specifying the end condition and additional execution instruction of a standing service order.

0340 Segment Group 4: DOC-RFF-DTM

A group of segments for specifying a reference to another service order.

0350 DOC, Document/message details

A segment for specifying the document name.

0360 RFF, Reference

A segment for specifying the identification number of the referenced order.

0370 DTM, Date/time/period

A segment for specifying the issue date and/or time of the referenced order.

0380 Segment Group 5: ATT-RFF-ADR-COM-HAN-REL-IMD-FTX-PNA-DTM-

PDI-NAT-LAN-CCI-SG6-SG7-SG13-SG15 A group of segments specifying the subject of investigation.

0390 ATT, Attribute

A segment for specifying the type of the subject of investigation.

0400 RFF, Reference

A segment for specifying the identification numbers of the actual subject of investigation.

This segment is also used for a reference to a healthcare party in segment group 1 specifying a supervising healthcare party.

0410 ADR, Address

A segment for specifying the address details of the subject of investigation.

0420 COM, Communication contact

A segment providing a telecommunication number for the subject of investigation.

0430 HAN, Handling instructions

A segment for specifying a collection warning concerning the subject of investigation.

0440 REL, Relationship

A segment for specifying the association between subjects of investigation such as donor, foetus, etc. as well as the relationship of a related person to the patient.

0450 IMD, Item description

A segment for specifying the description of the material being investigated if the subject of investigation is a material.

0460 FTX, Free text

A segment with free text information, in coded or clear form, for specifying additional information about the material as well as an unstructured telecommunication number of the subject of investigation.

0470 PNA, Party name

A segment for identifying the patient and related person or name by specifying various patient name details and official patient ID.

0480 DTM, Date/time/period

A segment for specifying relevant dates and/or times for the patient such as date of birth, date of death, etc.

0490 PDI, Person demographic information

A segment for specifying demographic information such as sex, marital status and religion.

0500 NAT, Nationality

A segment for specifying the nationality of a person.

0510 LAN, Language

A segment for specifying the language used by the person.

0520 CCI, Characteristic/class id

A segment for specifying the species or breed of an animal.

0530 Segment Group 6: PAS-LOC-DTM-RFF

A group of segments for specifying healthcare administrative information concerning the actual subject of investigation.

0540 PAS, Attendance

A segment for specifying patient administrative information such as administrative status concerning actual hospital stay or out-patient visit or ward stay related to the subject of investigation.

0550 LOC, Place/location identification

A segment for specifying the physical patient care location in terms of ward, room, bed, etc.

0560 DTM, Date/time/period

A segment for specifying admission and/or discharge date and time or start and/or end date and time of a ward stay.

0570 RFF, Reference

This segment keeps a reference to a healthcare party for specifying healthcare administrative information such as hospital, department, etc. where patient is admitted, located, etc.

0580 Segment Group 7: CAV-CIN-LAN-DTM-FTX-RFF-SG8-SG11

A group of segments giving information about a clinical observation including the origin of the clinical information. The clinical information may be a symptom, physical sign, anamnesis (medical history), clinical observation, diagnosis, etc.

0590 CAV, Characteristic value

A segment for specifying the type of clinical information.

0600 CIN, Clinical information

A segment for specifying the type of clinical observation, description of the clinical observation itself as well as the degree of certainty concerning the clinical observation.

0610 LAN, Language

A segment for specifying the language related to the clinical observation.

0620 DTM, Date/time/period

A segment for specifying date and times related to the clinical information, the clinical observation itself and the origin of clinical information.

0630 FTX, Free text

A segment with free text information, in coded or clear form, for description of the clinical information.

0640 RFF, Reference

This segment keeps a reference to a healthcare party for specifying origin of clinical information.

0650 Segment Group 8: STS-SEQ-GIS-RSL-CCI-CIN-DTM-FTX-RFF-

SG9-SG10 A group of segments for specifying a clinical investigation result item and the clinical investigation itself.

0660 STS, Status

A segment for specifying the status of the clinical investigation, e.g. preliminary results, final results, etc.

0670 SEQ, Sequence details

A segment for allocating a sequence number to a clinical investigation result item to allow referencing from within this message to a specific clinical investigation result item.

0680 GIS, General indicator

A segment for specifying the service type of the clinical investigation result item, e.g. new result item.

0690 RSL, Result

A segment for specifying the numerical value or a coded text value of a clinical investigation result item including unit of measurement, arithmetic comparator and the deviating result indicator.

0700 CCI, Characteristic/class id

A segment for identifying the clinical investigation and to describe specifications to the clinical investigation.

0710 CIN, Clinical information

A segment giving a text value of a clinical investigation result item as well as a comment to the clinical investigation result item as a diagnosis.

0720 DTM, Date/time/period

A segment for specifying relevant date and times concerning the investigation such as date and time for investigation performed, last status change and a date value of a clinical observation.

0730 FTX, Free text

A segment with free text information, in coded or clear form, for specifying the text value of a clinical investigation as well as comments to the clinical investigation and the investigation result item.

0740 RFF, Reference

This segment keeps a reference to the 'parent' clinical investigation result item if needed.

0750 Segment Group 9: RSL-FTX-CCI

A group of segments giving the reference limits of a clinical investigation result item.

0760 RSL, Result

A segment for specifying the numerical reference interval of an investigation result item and the type of reference interval.

0770 FTX, Free text

A segment with free text information, in coded or clear form, for specifying the textual reference limits of an investigation result item.

0780 CCI, Characteristic/class id

A segment for specifying a reference population, e.g. age, sex, smokers, etc.

0790 Segment Group 10: REL-RFF

A group of segments for identifying the persons and/or organisations involved in producing an investigation result item.

0800 REL, Relationship

A segment for specifying the type of relationship of a related healthcare service provider to the clinical investigation result item.

0810 RFF, Reference

A segment for specifying a reference to healthcare parties in segment group 1 where the related healthcare professional or organisation is identified.

0820 Segment Group 11: CLI-SG12

A group of segments for specifying a clinical intervention.

0830 CLI, Clinical intervention

A segment for specifying the type of intervention and the intervention itself.

0840 Segment Group 12: IMD-DSG-FTX-INP

A group of segments to describe interventions involving drugs.

0850 IMD, Item description

A segment for identifying a drug.

0860 DSG, Dosage administration

A segment for specifying the dosage and administration specifications of a drug.

0870 FTX, Free text

A segment with free text information, in coded or clear form, for specifying dosage and administration specification of a drug.

0880 INP, Parties to instruction

A segment for specifying the dosage regime.

0890 Segment Group 13: SEQ-IMD-PRC-RFF-QTY-DTM-PAC-PTY-FTX-

TDT-HAN-LOC-ADR-SG14 A group of segments containing information about the samples collected or to be collected concerning the requested investigation.

0900 SEQ, Sequence details

A segment for allocating a sequence number to the sample to allow referencing from within this message to a specific sample.

0910 IMD, Item description

A segment for specifying the characteristics of a sample like type of sample, anatomical origin and sample preservation material.

0920 PRC, Process identification

A segment for specifying information about type of collection procedure and subsequent handling of the sample.

0930 RFF, Reference

A segment for specifying the identification numbers of the actual sample allocated by service requester.

This segment also keeps a reference to healthcare parties related to this actual sample such as the sample collector and sample collection location.

This segment in addition keeps a reference to the "parent" sample if this sample is part of or derived from another sample.

0940 QTY, Quantity

A segment for specifying information about sample volume or weight.

0950 DTM, Date/time/period

A segment for specifying relevant dates and times concerning the sample such as start and/or end date and time or period for sample collection, etc.

0960 PAC, Package

A segment specifying the number of sample containers this sample consists of.

0970 PTY, Priority

A segment for specifying the sampling priority.

0980 FTX, Free text

A segment with free text information, in coded or clear form, expressing the comments of the sample collector, the comments of the requester to the sample, anatomical origin of sample, sample location description, etc.

0990 TDT, Details of transport

A segment for specifying the transport logistics of the collected sample.

1000 HAN, Handling instructions

A segment for specifying sample handling warning.

1010 LOC, Place/location identification

A segment for specifying the location for sample collection in terms of hospital ward, room and bed number.

1020 ADR, Address

A segment for specifying the address for the sample collection.

1030 Segment Group 14: CLI-IMD-DSG-DTM-FTX-QTY-INP

A group of segments for specifying the pre-treatment performed relating to a sample.

1040 CLI, Clinical intervention

A segment for describing the pre-treatment administered.

1050 IMD, Item description

A segment for specifying the substance administered for pre-treatment.

1060 DSG, Dosage administration

A segment for specifying the route of administration of the pre-treatment.

1070 DTM, Date/time/period

A segment for specifying relevant date and times for the pre-treatment like start, end or duration of administration.

1080 FTX, Free text

A segment with free text information, in coded or clear form, for describing the pre-treatment.

1090 QTY, Quantity

A segment for specifying amount of substance administered.

1100 INP, Parties to instruction

A segment for specifying dosage regime.

1110 Segment Group 15: GIS-CCI-PTY-QTY-CIN-DTM-FTX-TEM-MOA-

RFF-HAN-SG16 A group of segments for specifying a requested

1120 GIS, General indicator

A segment for specifying the service type of the requested investigation, e.g. new investigation, changes to a previous requested investigation, etc.

1130 CCI, Characteristic/class id

A segment for specifying the characteristics of the investigation. The characteristics may concern system, component or property examined, etc.

1140 PTY, Priority

A segment for specifying the performing and reporting priority of the requested investigation.

1150 QTY, Quantity

A segment for specifying the number of times to perform a requested investigation.

1160 CIN, Clinical information

A segment for specifying the reason for request as a diagnosis.

1170 DTM, Date/time/period

A segment for specifying date and times relevant for this requested investigation such as date and time of investigation request issued, investigation result due date and time, etc.

1180 FTX, Free text

A segment with free text information, in coded or clear form, for specifying the reason for request, requester's comments as well as comments to the investigation itself.

1190 TEM, Test method

A segment for specifying the reason for the requested investigation.

1200 MOA, Monetary amount

A segment for specifying the type of cost, the amount of cost and possibly currency unit used concerning the investigation.

1210 RFF, Reference

This segment keeps a reference to one or more samples related to this requested investigation such as the sample(s) involved in this investigation.

1220 HAN, Handling instructions

A segment specifying the requested commenting level of detail concerning the requested investigation.

1230 Segment Group 16: SCC-QTY-DTM-FTX

A group of segments for specifying a standing requested investigation.

1240 SCC, Scheduling conditions

A segment for specifying the delivery plan.

1250 QTY, Quantity

A segment for specifying the number of times per time interval a requested investigation should be performed.

1260 DTM, Date/time/period

A segment for specifying the start and end date and time for a requested investigation and the time interval between each repetition.

1270 FTX, Free text

A segment with free text information, in coded or clear form, for specifying the end-condition and additional execution instructions of a standing requested investigation.

1280 Segment Group 17: AUT-DTM

A group of segments for specifying authentication details.

1290 AUT, Authentication result

A segment for specifying results of an authentication procedure.

1300 DTM, Date/time/period

A segment for specifying the date and time for the validity of the authentication.

1310 UNT, Message trailer

A service segment ending a message, giving the total number of segments in the message and the control reference number of the message.


4.2. Data segment index (Alphabetical sequence by tag)

ADR Address
ATT Attribute
AUT Authentication result
BGM Beginning of message
CAV Characteristic value
CCI Characteristic/class id
CIN Clinical information
CLI Clinical intervention
COM Communication contact
DOC Document/message details
DSG Dosage administration
DTM Date/time/period
EMP Employment details
FCA Financial charges allocation
FTX Free text
GIS General indicator
HAN Handling instructions
IMD Item description
INP Parties to instruction
IRQ Information required
LAN Language
LOC Place/location identification
MOA Monetary amount
NAT Nationality
PAC Package
PAS Attendance
PDI Person demographic information
PNA Party name
PRC Process identification
PTY Priority
QTY Quantity
QUA Qualification
REL Relationship
RFF Reference
RSL Result
SCC Scheduling conditions
SEQ Sequence details
SPR Organisation classification details
STS Status
TDT Details of transport
TEM Test method
UNH Message header
UNT Message trailer

4.3. Message structure


4.3.1. Segment table

├─UNH Message header ×1 (M)
├─BGM Beginning of message ×1 (M)
├─DTM Date/time/period ×9 (C)
├─FTX Free text ×9 (C)
├─Segment Group 1 ×99 (M)
├─PNA Party name ×1 (M)
├─ADR Address ×9 (C)
├─COM Communication contact ×9 (C)
├─FTX Free text ×9 (C)
├─RFF Reference ×9 (C)
├─SEQ Sequence details ×1 (C)
├─LAN Language ×9 (C)
├─SPR Organisation classification details ×1 (C)
├─QUA Qualification ×9 (C)
└─EMP Employment details ×9 (C)
├─Segment Group 2 ×99 (M)
├─FCA Financial charges allocation ×1 (M)
├─GIS General indicator ×1 (M)
├─RFF Reference ×9 (M)
├─DTM Date/time/period ×9 (M)
├─PTY Priority ×1 (C)
├─CIN Clinical information ×9 (C)
├─FTX Free text ×9 (C)
├─LAN Language ×9 (C)
├─PAC Package ×1 (C)
├─IRQ Information required ×1 (C)
├─TEM Test method ×9 (C)
├─HAN Handling instructions ×1 (C)
├─Segment Group 3 ×99 (C)
├─SCC Scheduling conditions ×1 (M)
├─QTY Quantity ×1 (C)
├─DTM Date/time/period ×9 (C)
└─FTX Free text ×9 (C)
├─Segment Group 4 ×99 (C)
├─DOC Document/message details ×1 (M)
├─RFF Reference ×9 (M)
└─DTM Date/time/period ×1 (C)
└─Segment Group 5 ×99 (C)
──├─ATT Attribute ×1 (M)
──├─RFF Reference ×9 (C)
──├─ADR Address ×9 (C)
──├─COM Communication contact ×9 (C)
──├─HAN Handling instructions ×9 (C)
──├─REL Relationship ×1 (C)
──├─IMD Item description ×9 (C)
──├─FTX Free text ×9 (C)
──├─PNA Party name ×9 (C)
──├─DTM Date/time/period ×9 (C)
──├─PDI Person demographic information ×1 (C)
──├─NAT Nationality ×9 (C)
──├─LAN Language ×9 (C)
──├─CCI Characteristic/class id ×9 (C)
──├─Segment Group 6 ×9 (C)
──├─PAS Attendance ×1 (M)
──├─LOC Place/location identification ×9 (C)
──├─DTM Date/time/period ×9 (C)
──└─RFF Reference ×1 (C)
──├─Segment Group 7 ×999 (C)
──├─CAV Characteristic value ×1 (M)
──├─CIN Clinical information ×9 (C)
──├─LAN Language ×9 (C)
──├─DTM Date/time/period ×9 (C)
──├─FTX Free text ×99 (C)
──├─RFF Reference ×9 (C)
──├─Segment Group 8 ×99 (C)
──├─STS Status ×1 (M)
──├─SEQ Sequence details ×1 (C)
──├─GIS General indicator ×1 (C)
──├─RSL Result ×1 (C)
──├─CCI Characteristic/class id ×9 (M)
──├─CIN Clinical information ×9 (C)
──├─DTM Date/time/period ×99 (C)
──├─FTX Free text ×99 (C)
──├─RFF Reference ×99 (C)
──├─Segment Group 9 ×99 (C)
──├─RSL Result ×1 (M)
──├─FTX Free text ×9 (C)
──└─CCI Characteristic/class id ×9 (C)
──└─Segment Group 10 ×99 (C)
────├─REL Relationship ×1 (M)
────└─RFF Reference ×99 (C)
──└─Segment Group 11 ×99 (C)
────├─CLI Clinical intervention ×1 (M)
────└─Segment Group 12 ×99 (C)
──────├─IMD Item description ×1 (M)
──────├─DSG Dosage administration ×9 (C)
──────├─FTX Free text ×9 (C)
──────└─INP Parties to instruction ×9 (C)
──├─Segment Group 13 ×99 (C)
──├─SEQ Sequence details ×1 (M)
──├─IMD Item description ×9 (M)
──├─PRC Process identification ×9 (C)
──├─RFF Reference ×9 (C)
──├─QTY Quantity ×1 (C)
──├─DTM Date/time/period ×99 (C)
──├─PAC Package ×1 (C)
──├─PTY Priority ×1 (C)
──├─FTX Free text ×9 (C)
──├─TDT Details of transport ×9 (C)
──├─HAN Handling instructions ×9 (C)
──├─LOC Place/location identification ×9 (C)
──├─ADR Address ×9 (C)
──└─Segment Group 14 ×99 (C)
────├─CLI Clinical intervention ×1 (M)
────├─IMD Item description ×1 (C)
────├─DSG Dosage administration ×1 (C)
────├─DTM Date/time/period ×9 (C)
────├─FTX Free text ×9 (C)
────├─QTY Quantity ×1 (C)
────└─INP Parties to instruction ×9 (C)
──└─Segment Group 15 ×99 (C)
────├─GIS General indicator ×1 (M)
────├─CCI Characteristic/class id ×99 (M)
────├─PTY Priority ×9 (C)
────├─QTY Quantity ×1 (C)
────├─CIN Clinical information ×9 (C)
────├─DTM Date/time/period ×9 (C)
────├─FTX Free text ×9 (C)
────├─TEM Test method ×9 (C)
────├─MOA Monetary amount ×9 (C)
────├─RFF Reference ×99 (C)
────├─HAN Handling instructions ×1 (C)
────└─Segment Group 16 ×99 (C)
──────├─SCC Scheduling conditions ×1 (M)
──────├─QTY Quantity ×1 (C)
──────├─DTM Date/time/period ×9 (C)
──────└─FTX Free text ×9 (C)
├─Segment Group 17 ×99 (C)
├─AUT Authentication result ×1 (M)
└─DTM Date/time/period ×9 (C)
└─UNT Message trailer ×1 (M)

Return to Stylus Studio EDIFACT D97A Messages page.
EDI to XML Mapping for EDIFACT/X12 Convert EDIFACT/X12 Schemas to XML Schema Legacy Data Conversion Tools Access Relational Data as XML Visual XSLT and XQuery Mapping Tools Simplify Legacy Data Integration with Stylus Studio XML Enterprise Edition - Free Download!
Return to Stylus Studio EDIFACT home page.

Return to Stylus Studio home page.
Site Map | Privacy Policy | Terms of Use | Trademarks
Stylus Scoop XML Newsletter:
W3C Member
Stylus Studio® and DataDirect XQuery ™are from DataDirect Technologies, is a registered trademark of Progress Software Corporation, in the U.S. and other countries. © 2004-2011 All Rights Reserved.