Frames | No Frames

Return to Stylus Studio EDIFACT home page.
Return to Stylus Studio EDIFACT D97A Messages page.
UN/EDIFACT
UNITED NATIONS STANDARD MESSAGE (UNSM)

Firm booking message

Version:D
Release:97A
Contr. Agency:UN
Revision:6
Date:96-12-13
SOURCE:Western European EDIFACT Board

CONTENTS
Firm booking message
  1. INTRODUCTION
  2. SCOPE
    1. Functional definition
    2. Field of application
    3. Principles
  3. REFERENCES
  4. TERMS AND DEFINITIONS
    1. Standard terms and definitions
  5. MESSAGE DEFINITION
    1. Data segment clarification
    2. Data segment index (alphabetical sequence)
    3. Message structure
      1. Segment table
  6. ANNEX

For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.6, UN/ECE UNSM General Introduction


This message also occurs in the following versions of this standard:
D93A, D94A, D94B, D95A, D95B, D96A, D96B, D97A, D97B, D98A, D98B, D99A, D99B, D00A, D00B, D01A, D01B, D01C, D02A, D02B, D03A, D03B, D04A, D04B

0. INTRODUCTION

This specification provides the definition of the Firm booking message (IFTMBF) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport.


1. SCOPE

This paper provides the definition of the Firm Booking Message to be used in fulfilling the requirements of trading partners in the transport chain worldwide, in the interchange of cargo and transport related information using Electronic Data Interchange (EDI).

This message is a single consignment based message, being aligned with other single consignment based messages such as the other two booking messages (IFTMBP and IFTMBC), the instruction messages (IFTMIN and IFTMCS) and the Arrival Notice Message (IFTMAN). The single consignment based messages can be used by all modes of transport for the forwarding and transport of goods from any origin to any destination, regardless of route or prevailing commercial practice. These messages are suitable for the arrangement of the transport of goods between all parties to the movement of the consignment (including the consignor/shipper and consignee as well as the forwarders, brokers, and carriers involved) as well as providing the information necessary to perform that transport and delivery of the goods.

They should be used in the same way by each mode of transport when the requirements are common even if functionally similar information is known by different names.


1.1. Functional Definition

A message from a party definitely booking forwarding and/or transport services for a consignment to the party providing those services. The message will contain the conditions under which the sender of the messages requires the services to take place.


1.2. Field of Application

This message may be applied for both national and international trade. It is based on universal practice and is not dependent on the type of business or industry.


1.3. Principles

A Firm Booking Message will be sent, usually after an initial space booking has been made. This means that a Firm Booking Message could be sent as the initial message.

The message must be seen as a commitment from the shipper to the carrier or forwarder to execute certain services and is used for operational purposes by the service provider.

A booking-firm can be answered by a confirmation in any form by the service provider but this is not obligatory.

A booking firm message can be updated/replaced by a new booking firm message. It contains all relevant data elements of a consignment for operational purposes and is followed by an Instruction to ascertain a contract.

  • A consignment may contain several goods items.
  • Goods items may or may not be containerized.
  • A goods item may be transported in one or more containers, and a single container may contain one or more goods items.
  • One goods item may be related to one or more customs tariff codes.
  • Goods items related to one customs tariff code may be carried in one or more containers.
  • Goods items may reflect either the contractual or operational description of the goods.
  • A party to the movement of the consignment may book or order transport for one or more goods items.
  • A party to the movement of the consignment may book or issue instructions of transport to be arranged for several goods items by means of one or several of the following messages: IFTMBP, IFTMBF, IFTMBC, IFTMIN, IFTMCS, IFTMAN.
  • Pre-carriage (advanced haulage) and/or on-carriage (destination haulage) of goods items or equipment within one booking or instruction may take place in different steps, each step specified with its own transport details group.
  • Equipment may have other types of equipment attached to it, e.g. a temperature control unit attached to a container.
  • Equipment and/or goods items may be attached to or transported on another load or transport device, which as such may be attached to or transported on yet another load or transport device, e.g. a container on a chassis on a rail-car.
  • Transport devices, which have the ability of powered movement on their own, are specified in the transport details group. Other load or transport devices are specified as equipment.
  • The expression of packaging for goods items can be expressed at up to three levels.

A number of generic transport terms are used in this specification, to be described as:

  • MODE OF TRANSPORT: The method of transport used for the conveyance of goods or persons, e.g. by rail, by road, by sea.
  • MEANS OF TRANSPORT: the vehicle used for the transport of goods or persons, e.g. aircraft, truck, vessel.
  • TYPE OF MEANS OF TRANSPORT: The type of vehicle used in the transport process, e.g. wide body, tank truck, passenger vessel.
  • EQUIPMENT: Material resources necessary to facilitate the transport and handling of cargo. Transport equipment does under the given circumstances not have the ability to move by its own propulsion (e.g. sea container, trailer, unit load device, pallet).
  • TYPE OF EQUIPMENT: The type of material used, e.g. 40 feet container, four way pallet, mafi trailer.

2. REFERENCES

See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 1.


3. TERMS AND DEFINITIONS


3.1. Standard terms and definitions

See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 2.


4. MESSAGE DEFINITION


4.1. Data Segment Clarification

This section should be read in conjunction with the Segment Table which indicate mandatory, conditional and repeating requirements.

0010 UNH, Message header

A service segment starting and uniquely identifying a message. The message type code for the Firm booking message is IFTMBF.

Note: Firm booking messages conforming to this document must contain the following data in segment UNH, composite S009:

Data element0065IFTMBF
0052D
005497A
0051UN

0020 BGM, Beginning of message

A segment to indicate the beginning of a message and to transmit identifying number and type of the message.

0030 CTA, Contact information

A segment to identify a person or department to whom communication should be directed.

0040 COM, Communication contact

A segment to identify a communication number of a person or department to whom communication should be directed.

0050 DTM, Date/time/period

A segment to indicate a date and time applying to the whole message, e.g., date and time of document issue.

0060 TSR, Transport service requirements

A segment to identify the contract, conditions of carriage, services, and priority requirements for the transport.

0070 MOA, Monetary amount

A segment to specify a monetary amount, such as prepaid amount, discount or total amount.

0080 FTX, Free text

A segment to specify free form or processable supplementary information, such as status of transport, remarks to be printed on the transport documents (where required), consignment remarks, insurance instructions, etc., or any other additional information.

0090 CNT, Control total

A segment to specify totals for a consignment.

0100 Segment Group 1: LOC-DTM

A group of segments to specify locations and related date(s)/time(s) which apply to the entire message, e.g. place of transhipment.

0110 LOC, Place/location identification

A segment to identify a location applying to the entire message.

0120 DTM, Date/time/period

A segment to indicate date(s) and time(s) relating to the location.

0130 Segment Group 2: TOD-LOC

A group of segments to specify terms of delivery and related locations.

0140 TOD, Terms of delivery or transport

A segment to specify the applicable terms of delivery.

0150 LOC, Place/location identification

A segment to specify a location related to the terms of delivery.

0160 Segment Group 3: RFF-DTM

A group of segments containing a reference and constants which apply to the entire message.

0170 RFF, Reference

A segment to express a reference which applies to the entire message such as: the document/message number that is to be updated by this very message (according to data element 1225 Message Function, Coded in segment BGM), booking reference, order number, insurance contract, etc.

0180 DTM, Date/time/period

A segment to indicate date and time relating to the reference.

0190 Segment Group 4: GOR-FTX-SG5

A group of segments to identify customs and other governmental procedures and required documents.

0200 GOR, Governmental requirements

A segment to indicate applicable governmental procedures related to import, export and transport of the goods.

0210 FTX, Free text

A segment to provide supplementary governmental requirements information.

0220 Segment Group 5: DOC-DTM

A group of segments to specify required documents by government.

0230 DOC, Document/message details

A segment to indicate a document required by government.

0240 DTM, Date/time/period

A segment to specify the date/time related to the required document.

0250 Segment Group 6: TCC-LOC-FTX-CUX-PRI-EQN-PCD-MOA-QTY

A group of segments to specify charge calculations associated with the transport.

0260 TCC, Transport charge/rate calculations

A segment to specify charge.

0270 LOC, Place/location identification

A segment to indicate a location.

0280 FTX, Free text

A segment to specify processable supplementary information associated with charge.

0290 CUX, Currencies

A segment to specify currencies associated with charge.

0300 PRI, Price details

A segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilogram).

0310 EQN, Number of units

A segment to specify the number of units to which the unit price basis applies.

0320 PCD, Percentage details

A segment to indicate the applicable reduction or surcharge percentage details.

0330 MOA, Monetary amount

A segment to specify a monetary amount, such as prepaid amount, discount or total amount.

0340 QTY, Quantity

A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight.

0350 Segment Group 7: TDT-DTM-TSR-SG8-SG9

A group of segments to indicate details of the movement of goods such as mode and means of transport, locations, departure, and arrival date(s) and time(s).

0360 TDT, Details of transport

A segment to indicate information related to a certain stage of the transport, such as mode, means and carrier.

0370 DTM, Date/time/period

A segment to indicate departure/arrival date and time.

0380 TSR, Transport service requirements

A segment to identify contract, conditions of carriage, services, priority requirements for this stage of transport.

0390 Segment Group 8: LOC-DTM

A group of segments to specify a location and date/time related to this leg of transport.

0400 LOC, Place/location identification

A segment to indicate a location such as origin, destination, stop off, etc. related to this leg of transport.

0410 DTM, Date/time/period

A segment to specify a date/time related to the location, such as arrival date/time of a means of transport at a specific location.

0420 Segment Group 9: RFF-DTM

A group of segments to specify an additional reference related to the stage of the transport.

0430 RFF, Reference

A segment to specify the additional reference.

0440 DTM, Date/time/period

A segment to identify date and time relating to the reference.

0450 Segment Group 10: NAD-LOC-SG11-SG12-SG13-SG14-SG15

A group of segments to identify a party, related references, locations contacts, required documents, and charges to be paid by the party.

0460 NAD, Name and address

A segment to identify the party's name, address, and function.

0470 LOC, Place/location identification

A segment to indicate location where a specific function will be performed.

0480 Segment Group 11: CTA-COM

A group of segments identifying a contact and its communications related to the party.

0490 CTA, Contact information

A segment to identify a person or department within a party.

0500 COM, Communication contact

A segment to identify a communication number of a person or department to whom communication should be directed.

0510 Segment Group 12: DOC-DTM

A group of segments to identify required documents.

0520 DOC, Document/message details

A segment to identify a document required of, by or for the party.

0530 DTM, Date/time/period

A segment to identify date and time relating to the reference.

0540 Segment Group 13: RFF-DTM

A group of segments to specify a reference related to the party.

0550 RFF, Reference

A segment to identify a reference used by a party.

0560 DTM, Date/time/period

A segment to indicate date and time relating to the reference.

0570 Segment Group 14: CPI-RFF-CUX-LOC-MOA

A group of segments to identify the charge and its amount to be paid by the party.

0580 CPI, Charge payment instructions

A segment to identify default charge methodology.

0590 RFF, Reference

A segment to indicate a reference relating to the CPI segment, such as charge reference number.

0600 CUX, Currencies

A segment to indicate payment currency related to the charge methodology.

0610 LOC, Place/location identification

A segment to identify the place of charge collection.

0620 MOA, Monetary amount

A segment to identify the monetary amount associated with the charges.

0630 Segment Group 15: TSR-RFF-LOC-TPL-FTX

A group of segments to specify a transport service requirement and its associated details (such as applicable commercial agreement) related to the party.

0640 TSR, Transport service requirements

A segment to specify a required service for the transport, such as re-icing.

0650 RFF, Reference

A segment to identify a commercial agreement related to the service requirement.

0660 LOC, Place/location identification

A segment to indicate the location where the required service must be performed, such as place of re-icing.

0670 TPL, Transport placement

A segment to identify the means of transport to which the service requirement applies.

0680 FTX, Free text

A segment to provide any additional information related to the service requirement.

0690 Segment Group 16: GID-HAN-TMP-RNG-TMD-LOC-MOA-PIA-FTX-SG17-GDS-

SG18-SG19-SG20-SG21-SG22-SG23-SG25-SG27 A group of segments to describe the goods items for which transport is undertaken.

0700 GID, Goods item details

A segment to identify a goods item for which transport is undertaken. A goods item can be identified by up to three levels of packaging.

0710 HAN, Handling instructions

A segment to specify handling instructions relating to the goods item.

0720 TMP, Temperature

A segment to specify a temperature setting for a goods item.

0730 RNG, Range details

A segment to specify a temperature range setting for a goods item.

0740 TMD, Transport movement details

A segment to specify transport movement details for a goods item.

0750 LOC, Place/location identification

A segment to specify a country associated with a goods item, such as country of origin, or country of destination.

0760 MOA, Monetary amount

A segment to specify a monetary amount associated with a goods item, such as declared value, FOB value, etc.

0770 PIA, Additional product id

A segment to specify article numbers.

0780 FTX, Free text

A segment to specify processable supplementary information relating to the goods item.

0790 Segment Group 17: NAD-DTM

A group of segments to identify different places of collection and/or delivery for the goods item.

0800 NAD, Name and address

A segment to specify an address of a place of collection or delivery for a goods item.

0810 DTM, Date/time/period

A segment to indicate date and time relating to the place of collection or delivery.

0820 GDS, Nature of cargo

A segment to describe the nature of cargo.

0830 Segment Group 18: MEA-EQN

A group of segments to specify measurements applicable to a goods item.

0840 MEA, Measurements

A segment to specify measurements, other than dimensions, applicable to a goods item.

0850 EQN, Number of units

A segment to specify the number of equipment units to each of which the given measurement applies.

0860 Segment Group 19: DIM-EQN

A group of segments to specify dimensions applicable to a goods item.

0870 DIM, Dimensions

To specify dimensions applicable to a goods item.

0880 EQN, Number of units

A segment to specify the number of equipment units to each of which the given dimension applies.

0890 Segment Group 20: RFF-DTM

A group of segments to identify references to a goods item.

0900 RFF, Reference

A segment to identify a reference to a goods item.

0910 DTM, Date/time/period

A segment to indicate date and time relating to the reference.

0920 Segment Group 21: PCI-RFF-DTM-GIN

A group of segments to specify marks and numbers of a goods item.

0930 PCI, Package identification

A segment to specify marks and numbers of a goods item.

0940 RFF, Reference

A segment to identify a reference relating to the marks and numbers.

0950 DTM, Date/time/period

A segment to identify date and time of the reference.

0960 GIN, Goods identity number

A segment to specify identifying numbers related to transport units, such as batch numbers, serial numbers, etc.

0970 Segment Group 22: DOC-DTM

A group of segments to specify documents and associated date(s) and time(s) for a goods item.

0980 DOC, Document/message details

A segment to specify a document prepared for a goods item.

0990 DTM, Date/time/period

A segment to associate date and time with the prepared document.

1000 Segment Group 23: TPL-SG24

A group of segments to identify transport details and associated measurements for a goods item. This group may be repeated to indicate the different phases of the movement.

1010 TPL, Transport placement

A segment to identify transport details for a goods item.

1020 Segment Group 24: MEA-EQN

A group of segments to identify measurements.

1030 MEA, Measurements

A segment to specify the distribution of a goods item among the transport details.

1040 EQN, Number of units

A segment to specify the number of equipment units to each of which the given measurement applies.

1050 Segment Group 25: SGP-SG26

A group of segments to specify the distribution of a goods item among the transport equipment.

1060 SGP, Split goods placement

A segment to identify the equipment in which goods are transported.

1070 Segment Group 26: MEA-EQN

A group of segments to identify measurements.

1080 MEA, Measurements

A segment to specify measurements of that portion of the goods item in the equipment.

1090 EQN, Number of units

A segment to specify the number of equipment units to each of which the given measurement applies.

1100 Segment Group 27: DGS-FTX-SG28-SG29-SG30

A group of segments to specify dangerous goods details related to the goods item. One goods item may be in different dangerous goods classes.

1110 DGS, Dangerous goods

A segment to indicate the class of dangerous goods, packing group, etc.

1120 FTX, Free text

A segment to specify the dangerous goods technical name and to specify any additional dangerous goods information.

1130 Segment Group 28: CTA-COM

A group of segments to identify a contact to whom communication regarding the dangerous goods can be directed.

1140 CTA, Contact information

A segment to identify a person or department.

1150 COM, Communication contact

A segment to identify a communication number of a person or department.

1160 Segment Group 29: MEA-EQN

A group of segments to identify dangerous goods measurements.

1170 MEA, Measurements

A segment to specify measurements of the dangerous goods.

1180 EQN, Number of units

A segment to specify the number of equipment units to each of which the given measurement applies.

1190 Segment Group 30: SGP-SG31

A group of segments to specify the distribution of the dangerous goods among the transport equipment.

1200 SGP, Split goods placement

A segment to identify the equipment in which the dangerous goods are transported.

1210 Segment Group 31: MEA-EQN

A group of segments to identify dangerous goods measurements.

1220 MEA, Measurements

A segment to specify measurements of that portion of the dangerous goods in the equipment.

1230 EQN, Number of units

A segment to specify the number of equipment units to each of which the given measurement applies.

1240 Segment Group 32: EQD-EQN-TMD-MEA-DIM-TPL-HAN-TMP-FTX-SG33

A group of segments to specify equipment in which goods are transported.

1250 EQD, Equipment details

A segment to specify equipment, and equipment size and type used in the transport.

1260 EQN, Number of units

A segment to specify number of pieces of equipment required.

1270 TMD, Transport movement details

A segment to specify transport movement details for the equipment.

1280 MEA, Measurements

A segment to specify measurements, other than dimensions, associated with the equipment, such as weight.

1290 DIM, Dimensions

A segment to specify dimensions applicable to equipment.

1300 TPL, Transport placement

A segment to identify transport details for the equipment.

1310 HAN, Handling instructions

A segment to specify handling instructions for specified equipment.

1320 TMP, Temperature

A segment to specify a temperature setting for the equipment.

1330 FTX, Free text

A segment to specify processable supplementary information associated with the equipment.

1340 Segment Group 33: NAD-DTM-SG34

A group of segments to identify different equipment pick-up or drop-off places.

1350 NAD, Name and address

A segment to specify a pick-up or drop-off address.

1360 DTM, Date/time/period

A segment to indicate date and time relating to pick-up or drop-off.

1370 Segment Group 34: CTA-COM

A group of segments to identify a contact and its communications related to the party.

1380 CTA, Contact information

A segment to specify a contact name associated with a specified equipment positioning or collection address.

1390 COM, Communication contact

A segment to specify a communication number related to the contact.

1400 UNT, Message trailer

A service segment ending a message, giving the total number of segments in the message and the control reference number of the message.


4.2. Data segment index (Alphabetical sequence by tag)

BGM Beginning of message
CNT Control total
COM Communication contact
CPI Charge payment instructions
CTA Contact information
CUX Currencies
DGS Dangerous goods
DIM Dimensions
DOC Document/message details
DTM Date/time/period
EQD Equipment details
EQN Number of units
FTX Free text
GDS Nature of cargo
GID Goods item details
GIN Goods identity number
GOR Governmental requirements
HAN Handling instructions
LOC Place/location identification
MEA Measurements
MOA Monetary amount
NAD Name and address
PCD Percentage details
PCI Package identification
PIA Additional product id
PRI Price details
QTY Quantity
RFF Reference
RNG Range details
SGP Split goods placement
TCC Transport charge/rate calculations
TDT Details of transport
TMD Transport movement details
TMP Temperature
TOD Terms of delivery or transport
TPL Transport placement
TSR Transport service requirements
UNH Message header
UNT Message trailer

4.3. Message structure


4.3.1. Segment table

├─UNH Message header ×1 (M)
├─BGM Beginning of message ×1 (M)
├─CTA Contact information ×1 (C)
├─COM Communication contact ×9 (C)
├─DTM Date/time/period ×9 (C)
├─TSR Transport service requirements ×9 (C)
├─MOA Monetary amount ×9 (C)
├─FTX Free text ×99 (C)
├─CNT Control total ×9 (C)
├─Segment Group 1 ×99 (C)
├─LOC Place/location identification ×1 (M)
└─DTM Date/time/period ×9 (C)
├─Segment Group 2 ×2 (C)
├─TOD Terms of delivery or transport ×1 (M)
└─LOC Place/location identification ×9 (C)
├─Segment Group 3 ×99 (C)
├─RFF Reference ×1 (M)
└─DTM Date/time/period ×9 (C)
├─Segment Group 4 ×9 (C)
├─GOR Governmental requirements ×1 (M)
├─FTX Free text ×9 (C)
└─Segment Group 5 ×9 (C)
──├─DOC Document/message details ×1 (M)
──└─DTM Date/time/period ×1 (C)
├─Segment Group 6 ×99 (C)
├─TCC Transport charge/rate calculations ×1 (M)
├─LOC Place/location identification ×1 (C)
├─FTX Free text ×1 (C)
├─CUX Currencies ×1 (C)
├─PRI Price details ×1 (C)
├─EQN Number of units ×1 (C)
├─PCD Percentage details ×1 (C)
├─MOA Monetary amount ×9 (C)
└─QTY Quantity ×9 (C)
├─Segment Group 7 ×99 (C)
├─TDT Details of transport ×1 (M)
├─DTM Date/time/period ×9 (C)
├─TSR Transport service requirements ×9 (C)
├─Segment Group 8 ×99 (C)
├─LOC Place/location identification ×1 (M)
└─DTM Date/time/period ×9 (C)
└─Segment Group 9 ×9 (C)
──├─RFF Reference ×1 (M)
──└─DTM Date/time/period ×1 (C)
├─Segment Group 10 ×99 (C)
├─NAD Name and address ×1 (M)
├─LOC Place/location identification ×9 (C)
├─Segment Group 11 ×9 (C)
├─CTA Contact information ×1 (M)
└─COM Communication contact ×9 (C)
├─Segment Group 12 ×9 (C)
├─DOC Document/message details ×1 (M)
└─DTM Date/time/period ×1 (C)
├─Segment Group 13 ×9 (C)
├─RFF Reference ×1 (M)
└─DTM Date/time/period ×9 (C)
├─Segment Group 14 ×9 (C)
├─CPI Charge payment instructions ×1 (M)
├─RFF Reference ×99 (C)
├─CUX Currencies ×1 (C)
├─LOC Place/location identification ×9 (C)
└─MOA Monetary amount ×9 (C)
└─Segment Group 15 ×99 (C)
──├─TSR Transport service requirements ×1 (M)
──├─RFF Reference ×1 (C)
──├─LOC Place/location identification ×1 (C)
──├─TPL Transport placement ×1 (C)
──└─FTX Free text ×9 (C)
├─Segment Group 16 ×999 (C)
├─GID Goods item details ×1 (M)
├─HAN Handling instructions ×1 (C)
├─TMP Temperature ×1 (C)
├─RNG Range details ×1 (C)
├─TMD Transport movement details ×1 (C)
├─LOC Place/location identification ×9 (C)
├─MOA Monetary amount ×9 (C)
├─PIA Additional product id ×9 (C)
├─FTX Free text ×9 (C)
├─Segment Group 17 ×9 (C)
├─NAD Name and address ×1 (M)
└─DTM Date/time/period ×1 (C)
├─GDS Nature of cargo ×9 (C)
├─Segment Group 18 ×99 (C)
├─MEA Measurements ×1 (M)
└─EQN Number of units ×1 (C)
├─Segment Group 19 ×99 (C)
├─DIM Dimensions ×1 (M)
└─EQN Number of units ×1 (C)
├─Segment Group 20 ×9 (C)
├─RFF Reference ×1 (M)
└─DTM Date/time/period ×9 (C)
├─Segment Group 21 ×9 (C)
├─PCI Package identification ×1 (M)
├─RFF Reference ×1 (C)
├─DTM Date/time/period ×1 (C)
└─GIN Goods identity number ×9 (C)
├─Segment Group 22 ×9 (C)
├─DOC Document/message details ×1 (M)
└─DTM Date/time/period ×9 (C)
├─Segment Group 23 ×9 (C)
├─TPL Transport placement ×1 (M)
└─Segment Group 24 ×9 (C)
──├─MEA Measurements ×1 (M)
──└─EQN Number of units ×1 (C)
├─Segment Group 25 ×999 (C)
├─SGP Split goods placement ×1 (M)
└─Segment Group 26 ×9 (C)
──├─MEA Measurements ×1 (M)
──└─EQN Number of units ×1 (C)
└─Segment Group 27 ×9 (C)
──├─DGS Dangerous goods ×1 (M)
──├─FTX Free text ×99 (C)
──├─Segment Group 28 ×9 (C)
──├─CTA Contact information ×1 (M)
──└─COM Communication contact ×9 (C)
──├─Segment Group 29 ×9 (C)
──├─MEA Measurements ×1 (M)
──└─EQN Number of units ×1 (C)
──└─Segment Group 30 ×999 (C)
────├─SGP Split goods placement ×1 (M)
────└─Segment Group 31 ×9 (C)
──────├─MEA Measurements ×1 (M)
──────└─EQN Number of units ×1 (C)
├─Segment Group 32 ×999 (C)
├─EQD Equipment details ×1 (M)
├─EQN Number of units ×1 (C)
├─TMD Transport movement details ×1 (C)
├─MEA Measurements ×9 (C)
├─DIM Dimensions ×9 (C)
├─TPL Transport placement ×9 (C)
├─HAN Handling instructions ×1 (C)
├─TMP Temperature ×1 (C)
├─FTX Free text ×9 (C)
└─Segment Group 33 ×9 (C)
──├─NAD Name and address ×1 (M)
──├─DTM Date/time/period ×1 (C)
──└─Segment Group 34 ×9 (C)
────├─CTA Contact information ×1 (M)
────└─COM Communication contact ×9 (C)
└─UNT Message trailer ×1 (M)

5. Annex A Example (Details of transport)

1. TDT+20+HL12345+1:MARITIME+:CONTAINER VESSEL+:::HAPAG LLOYD+++PHXXX:::FAITHFUL' Notes: 20 indicates 'main transport' (d.e. 8051); HL12345 is assigned by the carrier (d.e. 8028; is the 'flight number' in the air mode); PHXXX is the radio call sign (d.e. 8213); 'FAITHFUL' is the name of the vessel

2. TDT+20+91/05/0021+3:ROAD++:::INT. TRUCKING CO.+++BB-10-XX::::NL' Note: BB-10-XX represents the (Dutch) truck registration no.


Return to Stylus Studio EDIFACT D97A Messages page.
EDI to XML Mapping for EDIFACT/X12 Convert EDIFACT/X12 Schemas to XML Schema Legacy Data Conversion Tools Access Relational Data as XML Visual XSLT and XQuery Mapping Tools EDIFACT to XML
Return to Stylus Studio EDIFACT home page.

Return to Stylus Studio home page.
Site Map | Privacy Policy | Terms of Use | Trademarks
Stylus Scoop XML Newsletter:
W3C Member
Stylus Studio® and DataDirect XQuery ™are from DataDirect Technologies, is a registered trademark of Progress Software Corporation, in the U.S. and other countries. © 2004-2016 All Rights Reserved.