Frames | No Frames

Return to Stylus Studio EDIFACT home page.
Return to Stylus Studio EDIFACT D04A Messages page.
UN/EDIFACT
UNITED NATIONS STANDARD MESSAGE (UNSM)

Price/sales catalogue message

Version:D
Release:04A
Contr. Agency:UN
Revision:13
Date:2004-05-18
SOURCE:TBG1 Supply Chain

CONTENTS
Price/sales catalogue message
  1. INTRODUCTION
  2. SCOPE
    1. Functional definition
    2. Field of application
    3. Principles
  3. REFERENCES
  4. TERMS AND DEFINITIONS
    1. Standard terms and definitions
  5. MESSAGE DEFINITION
    1. Segment clarification
      1. Header section
      2. Detail section
    2. Segment index (alphabetical sequence by tag)
    3. Message structure
      1. Segment table

For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM General Introduction


This message also occurs in the following versions of this standard:
D93A, D94A, D94B, D95A, D95B, D96A, D96B, D97A, D97B, D98A, D98B, D99A, D99B, D00A, D00B, D01A, D01B, D01C, D02A, D02B, D03A, D03B, D04A, D04B

0. INTRODUCTION

This specification provides the definition of the Price/sales catalogue message (PRICAT) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport.


1. SCOPE


1.1. Functional definition

A message to enable the transmission of information regarding pricing and catalogue details for goods and services offered by a seller to a buyer. The message can also be sent by a buyer to a seller. This may be a response (acceptance or rejection) to a previously received price/sales catalogue message, or a notification of negotiated prices.


1.2. Field of application

The Price/sales catalogue message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry.


1.3. Principles

  • A Price/Sales Catalogue Message Pricing-group or item may refer to either goods items or services.
  • The Price items are structured together according to industrial or commercial requirements.
  • The sales and delivery conditions within a Price/Sales Catalogue Message may refer to:

. all product/service items of the Price/Sales Catalogue Message, . a group of product/service items, . a single product/service item in the message, . within a single product/service item to different price basis occurrences.

  • A Price/Sales Catalogue Message may contain product and price information, as well as sales conditions.
  • The Price Item Line may identify the component parts of the price item.

When using the price/sales catalogue message to provide a response, the message sender may specify this information in one of two ways:

  • The total acceptance or rejection of a previous price/sales catalogue message;
  • The rejection of information either at a product group level or at an individual product level.

2. REFERENCES

See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1.


3. TERMS AND DEFINITIONS


3.1. Standard terms and definitions

See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2.


4. MESSAGE DEFINITION


4.1. Segment clarification

This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements.

The following guidelines and principles apply to the whole message and are intended to facilitate the understanding and implementation of the message:

All specified dates/times should be in the format 'ccyymmdd'/'hhmm' unless all parties involved in the transaction agree that there is a functional requirement for an alternative format. Periods should be specified as whole numbers representing the required period as indicated in the date/time/period format (weeks, months, etc.).

Conditional data that is not required in the message should not be included.

Care must be taken that the segment qualifier in dependent segments do not conflict with the segment qualifier of the trigger segment of the group.

Free text information within the message should be avoided as this inhibits automatic processing.


4.1.1. Header section

Information to be provided in the Header section:

0010 UNH, Message header

A service segment starting and uniquely identifying a message. The message type code for the Price/sales catalogue message is PRICAT.

Note: Price/sales catalogue messages conforming to this document must contain the following data in segment UNH, composite S009:

Data element0065PRICAT
0052D
005404A
0051UN

0020 BGM, Beginning of message

A segment by which the sender must uniquely identify the Price/Sales catalogue by means of its type and number and when necessary its function.

0030 DTM, Date/time/period

A segment specifying general dates and, when relevant, times related to the whole message. The segment must be specified at least once to identify the Price/sales catalogue document date.

Examples of the use of this DTM segment are: Lead times that apply to the whole Price/Sales catalogue or expiration date/time of the Price/sales catalogue.

The Date/time/period segment within other Segment groups should be used whenever the date/time/period requires to be logically related to another specified data item. e.g. the Reference date is specified within the RFF segment group.

0040 ALI, Additional information

A segment indicating special conditions related to the total Price/sales catalogue owing to origin, customs preference, or other commercial factors.

0050 FTX, Free text

A segment with free text information, in coded or clear form, used when additional information is needed but cannot be accommodated within other segments. In computer to computer exchanges such text will normally require the receiver to process this segment manually.

0060 Segment Group 1: RFF-DTM

A group of segments for giving references and where necessary, their dates, relating to the whole message, e.g. request for price information.

0070 RFF, Reference

A segment identifying the reference by its number and where appropriate, a line number within a document.

0080 DTM, Date/time/period

A segment specifying the date/time related to the reference.

0090 Segment Group 2: NAD-LOC-SG3-SG4

A group of segments identifying the parties with associated information relevant to the price/sales catalogue.

0100 NAD, Name and address

A segment identifying names and addresses of the parties, in coded or clear form, and their functions. Identification of the sender and receiver parties is mandatory for the Price/sales catalogue message. It is recommended that where possible only the coded form of the party ID should be specified, e.g. The sender and the receiver are known to each other, thus only the coded ID is required, but the other parties specified in the message may vary and would have to be clearly specified, preferably in structured format.

0110 LOC, Place/location identification

A segment giving more specific location information of the party specified in the NAD segment e.g. internal site/building number.

0120 Segment Group 3: RFF-DTM

A group of segments giving references only relevant to the specified party.

0130 RFF, Reference

A segment identifying the reference by its number and where appropriate a line number within a document.

0140 DTM, Date/time/period

A segment specifying the date and/or time related to the reference.

0150 Segment Group 4: CTA-COM

A group of segments giving contact details of the person or department within the party identified in the NAD segment.

0160 CTA, Contact information

A segment to identify a person or department, and their function, to whom communications should be directed.

0170 COM, Communication contact

A segment to identify a communications type and number for the contact specified in the CTA segment.

0180 Segment Group 5: TAX-MOA-DTM

A group of segments specifying tax related information, valid for the whole Price/sales catalogue, e.g. Value Added Tax at the standard rate is applicable for all items.

0190 TAX, Duty/tax/fee details

A segment specifying a tax type, category and rate, or exemption.

0200 MOA, Monetary amount

A segment specifying the amount for the identified tax/fee, e.g. a stamp fee.

0210 DTM, Date/time/period

A segment indicating the date of application of the specified tax.

0220 Segment Group 6: CUX-DTM

A group of segments specifying the currencies and related dates/periods valid for the whole Price/sales catalogue. Currency data maybe omitted in national applications but will be required for international transactions.

0230 CUX, Currencies

A segment identifying the currencies required in the Price/sales catalogue, e.g. the Price/sales catalogue currency. A rate of exchange may be given to convert a reference currency into a target currency.

0240 DTM, Date/time/period

A segment specifying the date/time/period related to the rate of exchange.

0250 Segment Group 7: PYT-DTM-PCD-MOA

A group of segments specifying the terms of payment applicable for the whole Price/sales catalogue.

0260 PYT, Payment terms

A segment identifying the payment terms and date/time basis.

0270 DTM, Date/time/period

A segment giving the specific date/time/period, if needed, of any payments, discounts, instalments etc.

0280 PCD, Percentage details

A segment specifying the discount, interest, penalty as well as instalment percentage.

0290 MOA, Monetary amount

A segment specifying amounts related to payment discounts, penalties or instalments.

0300 Segment Group 8: TDT-LOC

A group of segments identifying the mode and means of transport and locations relating to the whole Price/sales catalogue.

0310 TDT, Transport information

A segment specifying the mode, means and identification of the transport for the goods listed in the Price/sales catalogue. If required, the carrier's address should be indicated within the NAD segment group.

0320 LOC, Place/location identification

A segment identifying locations relevant to the transport specified in the TDT segment, e.g. place of departure or border crossing point.

0330 Segment Group 9: TOD-LOC

A group of segments indicating the terms of delivery for the whole Price/sales catalogue.

0340 TOD, Terms of delivery or transport

A segment identifying the delivery terms to be used, e.g. UN INCOTERMS.

0350 LOC, Place/location identification

A segment identifying locations relevant to the delivery terms specified in the TOD segment.

0360 Segment Group 10: ALC-ALI-DTM-SG11-SG12-SG13-SG14-SG15

A group of segments specifying allowances and charges for the whole Price/sales catalogue. The allowance or charge specified within this segment group may either relate to the total Price/sales catalogue in which case it cannot be overridden at detail level, or it can relate to the line items as a default allowance/charge and can be overridden by the ALC segment group within the detail section. Where relevant, additional information, date information, tax/fee details are to be indicated. The basis for the calculation of the allowance/charge may be a quantity, a percentage, an amount or a rate and one of the segment group 11-14) should be used accordingly.

0370 ALC, Allowance or charge

A segment identifying the charge or allowance and, where necessary its calculation sequence.

0380 ALI, Additional information

A segment indicating that the allowance or charge specified is subject to special conditions owing to origin, customs preference or commercial factors.

0390 DTM, Date/time/period

A segment indicating any dates, times or periods applicable to the allowances and charges specified at heading level.

0400 Segment Group 11: QTY-RNG

A group of segments specifying the quantity of the allowance or charge with its measure unit specifier. A range to which the allowance or charge applies may be specified, e.g. An allowance of a free quantity of 20 pieces may be specified if the quantity of goods ordered is greater than 1000 pieces.

0410 QTY, Quantity

A segment identifying the type of quantity and the quantity related to the allowance or charge.

0420 RNG, Range details

A segment specifying, if required, the range to which the allowance or charge applies.

0430 Segment Group 12: PCD-RNG

A group of segments specifying the percentage for the allowance or charge, e.g. The allowance/charge amount is calculated as 5% of the goods value or a price reduction of 5% may be specified if the goods quantity ordered is within the range 5 tons to 10 tons.

0440 PCD, Percentage details

A segment identifying the percentage and the percentage basis for the calculation of the allowance or charge.

0450 RNG, Range details

A segment specifying, if required, a range for the application of the percentage.

0460 Segment Group 13: MOA-RNG

A group of segments specifying a monetary amount for an allowance or charge. A range to which the allowance or charge applies can be specified, e.g. an allowance of 5000 BEF may be specified if goods value ordered is greater than 100000 BEF.

0470 MOA, Monetary amount

A segment identifying the monetary amount for the allowance or charge.

0480 RNG, Range details

A segment specifying, if required, a range for the application of the allowance/charge amount.

0490 Segment Group 14: RTE-RNG

A group of segments specifying the rate per unit and basis to which the allowance or charge applies, e.g. The allowance/charge rate is 3 DEM per 10 tons.

0500 RTE, Rate details

A segment specifying the rate per unit and the basis for calculation.

0510 RNG, Range details

A segment specifying, if required, the range for the application of the allowance/charge rate.

0520 Segment Group 15: TAX-MOA-DTM

A group of segments of segments specifying tax related information for the allowance or charge.

0530 TAX, Duty/tax/fee details

A segment specifying the tax type, category, and rate, or exemption, related to the allowance or charge.

0540 MOA, Monetary amount

A segment specifying a monetary amount for the allowance or charge. (e.g. a stamp fee).

0550 DTM, Date/time/period

A segment indicating the date of application of the specified tax.

0560 Segment Group 16: TRU-DTM

A group of segments to identify technical rules applicable for all products contained in the message and the rules' issue dates.

0570 TRU, Technical rules

A segment identifying technical rules and conditions relevant for the whole message.

0580 DTM, Date/time/period

A segment specifying dates associated with the technical rules.


4.1.2. Detail section

Information to be provided in the Detail section:

0590 Segment group 17: PGI-DTM-QTY-ALI-FTX-SG18-SG19-SG20-SG21-SG27- SG30-SG31-SG32-SG33-SG34-SG35-SG36 A group of segments enabling the standard commercial factors relevant to a specific group of items to be specified. e.g. quantity related price break factors or minimum order quantity.

0600 PGI, Product group information

A segment identifying the products Price/Tariff group where applicable.

0610 DTM, Date/time/period

A segment indicating date/time/period related to the price group. e.g. expiration date/time or validity period for the price group. Lead time of the goods/services mentioned in the price group can also be provided by the DTM segment.

0620 QTY, Quantity

A segment to specify pertinent quantities related to the specified price group, e.g. minimum order quantity.

0630 ALI, Additional information

A segment indicating that the price group is subject to special conditions owing to origin, customs preference or commercial factors.

0640 FTX, Free text

A segment with free text information, in coded or clear form, used when additional information is needed for the specification of the price group. In computer to computer exchanges such text will normally require the receiver to process this segment manually.

0650 Segment Group 18: CUX-DTM

A group of segments specifying the currencies and related dates/periods valid for the whole pricing group.

0660 CUX, Currencies

A segment identifying the currencies required in the Price/sales catalogue, e.g. the Price/sales catalogue currency. A rate of exchange may be given to convert a reference currency into a target currency.

0670 DTM, Date/time/period

A segment specifying the date/time/period related to the rate of exchange.

0680 Segment Group 19: PRI-CUX-APR-RNG-DTM

A group of segments identifying the details of the price information for the product or service identified in the Price group.

0690 PRI, Price details

A segment providing either the unit or reference price and the price type, valid for the pricing group.

0700 CUX, Currencies

A segment identifying the currency in which the price is expressed.

0710 APR, Additional price information

A segment to identify additional pricing information related to the class or type of trade and additionally identifying the reason for any change.

0720 RNG, Range details

A segment to identify a quantity or an amount range to which the price information applies.

0730 DTM, Date/time/period

A segment to identify the date/time/period information related to the price information, e.g. period of validity.

0740 Segment Group 20: TAX-MOA-DTM

A group of segments specifying tax related information, valid for the pricing group.

0750 TAX, Duty/tax/fee details

A segment specifying a tax type, category and rate, or exemption.

0760 MOA, Monetary amount

A segment specifying the amount for the identified tax/fee, e.g. a stamp fee.

0770 DTM, Date/time/period

A segment indicating the date of application of the specified tax.

0780 Segment Group 21: ALC-ALI-SG22-SG23-SG24-SG25-SG26

A group of segments specifying allowances and charges for the whole pricing group. The allowances or charges specified within group 19 may either relate to the total pricing group in which case it cannot be overridden at price item level, or it can relate to the price item level as a default allowance/charge and can be overridden by the ALC group within at the price item level. When relevant, additional information, tax details may be indicated. The basis for the calculation of the allowance/charge may be a quantity, a percentage, an amount or a rate and one of the groups 20-23 should be used accordingly.

0790 ALC, Allowance or charge

A segment identifying the charge or allowance and, where necessary its calculation sequence.

0800 ALI, Additional information

A segment indicating that the allowance or charge specified is subject to special conditions owing to origin, customs preference or commercial factors..

0810 Segment Group 22: QTY-RNG

A group of segments specifying the quantity of the allowance or charge with its measure unit specifier. A range to which the allowance or charge applies may be specified. e.g. An allowance of a free quantity of 20 pieces may be specified if the quantity of goods ordered is greater than 1000 pieces.

0820 QTY, Quantity

A segment identifying the type of quantity and the quantity related to the allowance or charge.

0830 RNG, Range details

A segment specifying, if required, the range to which the allowance or charge applies.

0840 Segment Group 23: PCD-RNG

A group of segments specifying the percentage for the allowance or charge, e.g. The allowance/charge amount is calculated as 5% of the goods value or a price reduction of 5% may be specified if the goods quantity ordered is within the range 5 tons to 10 tons.

0850 PCD, Percentage details

A segment identifying the percentage and the percentage basis for the calculation of the allowance or charge.

0860 RNG, Range details

A segment specifying, if required, a range for the application of the percentage.

0870 Segment Group 24: MOA-RNG

A group of segments specifying a monetary amount for an allowance or charge. A range to which the allowance or charge applies can be specified, e.g. an allowance of 5000 BEF may be specified if goods value ordered is greater than 100000 BEF.

0880 MOA, Monetary amount

A segment identifying the monetary amount for the allowance or charge.

0890 RNG, Range details

A segment specifying, if required, a range for the application of the allowance/charge amount.

0900 Segment Group 25: RTE-RNG

A group of segments specifying the rate per unit and basis to which the allowance or charge applies, e.g. The allowance/charge rate is 3 DEM per 10 tons.

0910 RTE, Rate details

A segment specifying the rate per unit and the basis for calculation.

0920 RNG, Range details

A segment specifying, if required, the range for the application of the allowance/charge rate.

0930 Segment Group 26: TAX-MOA-DTM

A group of segments of segments specifying tax related information for the allowance or charge.

0940 TAX, Duty/tax/fee details

A segment specifying the tax type, category, and rate, or exemption, related to the allowance or charge.

0950 MOA, Monetary amount

A segment specifying a monetary amount for the allowance or charge. (e.g. a stamp fee).

0960 DTM, Date/time/period

A segment indicating the date of application of the specified tax.

0970 Segment Group 27: NAD-LOC-SG28-SG29

A group of segments identifying the parties with the associated information relevant for the pricing group.

0980 NAD, Name and address

A segment identifying names and addresses of the parties, in coded or clear form, and their functions. It is recommended that where possible only the coded form of the party ID should be specified. e.g. The sender and the receiver are known to each other, thus only the coded ID is required, but the other parties specified in the message may vary and would have to be clearly specified, preferably in structured format.

0990 LOC, Place/location identification

A segment giving more specific location information of the party specified in the NAD segment e.g. internal site/building number.

1000 Segment Group 28: RFF-DTM

A group of segments giving references only relevant to the specified party.

1010 RFF, Reference

A segment identifying the reference by its number and where appropriate a line number within a document.

1020 DTM, Date/time/period

A segment specifying the date and/or time related to the reference.

1030 Segment Group 29: CTA-COM

A group of segments giving contact details of the person or department within the party identified in the NAD segment.

1040 CTA, Contact information

A segment to identify a person or department, and their function, to whom communications should be directed.

1050 COM, Communication contact

A segment to identify a communications type and number for the contact specified in the CTA segment.

1060 Segment Group 30: PYT-DTM-PCD-MOA

A group of segments specifying the terms of payment applicable for the whole pricing group.

1070 PYT, Payment terms

A segment identifying the payment terms and date/time basis.

1080 DTM, Date/time/period

A segment giving the specific date/time/period, if needed, of any payments, discounts, instalments etc.

1090 PCD, Percentage details

A segment specifying the discount, interest, penalty as well as instalment percentage.

1100 MOA, Monetary amount

A segment specifying amounts related to payment discounts, penalties or instalments.

1110 Segment Group 31: TDT-LOC

A group of segments identifying the mode and means of transport, and locations relating to the whole pricing group.

1120 TDT, Transport information

A segment specifying the mode, means and identification of the transport for the goods listed in the Price/sales catalogue. If required, the carrier's address should be indicated within the NAD segment group.

1130 LOC, Place/location identification

A segment identifying locations relevant to the transport specified in the TDT segment, e.g. place of departure or border crossing point.

1140 Segment Group 32: TOD-LOC

A group of segments indicating the terms of delivery for the whole pricing group.

1150 TOD, Terms of delivery or transport

A segment identifying the delivery terms to be used. e.g. UN INCOTERMS.

1160 LOC, Place/location identification

A segment identifying locations relevant to the delivery terms specified in the TOD segment.

1170 Segment Group 33: PAC-MEA-HAN

A group of segments specifying the packaging, physical dimensions for goods referenced by the price group. If required, providing handling instructions and notification of hazardous materials, relating to the price group.

1180 PAC, Package

A segment specifying the physical type of packages for the price group. e.g. pallets.

1190 MEA, Measurements

A segment specifying physical measurements of packages described in the PAC segment e.g. pallet size.

1200 HAN, Handling instructions

A segment providing information on required handling instructions of materials and additionally, if required, notifying hazardous materials in the whole pricing group.

1210 Segment Group 34: EFI-CED-COM-RFF-DTM-QTY

A group of segments that refers, through an external file identification, to each of the external files and giving additional information about each of the files.

1220 EFI, External file link identification

This segment will identify the external files by indicating the file name, file number and its sequence number in an exchange.

1230 CED, Computer environment details

To give precise definitions of all necessary elements belonging to the configuration of a computer system e.g. hardware, firmware, operating system, communication and application software.

1240 COM, Communication contact

To identify a communication number of a department or a person to whom communication should be directed.

1250 RFF, Reference

A segment giving a reference related to the file identified by a previous external file link identification segment.

1260 DTM, Date/time/period

This segment will convey the date/time details of the external file.

1270 QTY, Quantity

The size/volume of the external file identified in the previous external file link identification segment.

1280 Segment Group 35: TRU-DTM

A group of segments to identify technical rules applicable for the current product group and the rules' issue dates.

1290 TRU, Technical rules

A segment identifying technical rules and conditions applying to a product group.

1300 DTM, Date/time/period

A segment specifying dates associated with the technical rules and issue dates applying to a product group.

1310 Segment Group 36: LIN-PIA-IMD-MEA-QTY-HAN-ALI-DTM-RFF-LOC-

DOC-PTY-FTX-SG37-SG38-SG39-SG40-SG41-SG47- SG48-SG49-SG50-SG51-SG52-SG54-SG55-SG56 A group of segments providing the relevant price/sales information for the specified product/service.

1320 LIN, Line item

A segment identifying the line item (or sub-line item in a configuration).

1330 PIA, Additional product id

A segment for identifying a product in the Price Catalogue.

1340 IMD, Item description

A segment for describing the product or service as well as its characteristics. This segment should be used for products or services that cannot be identified by a product code or article number.

1350 MEA, Measurements

A segment to allow physical measurements and dimensions to be stated, where this is required for identification of the product.

1360 QTY, Quantity

A segment to specify pertinent quantities related to the specified price item line, e.g. minimum order quantity.

1370 HAN, Handling instructions

A segment providing information on required handling of materials in the line item, and additionally, if required, notifying hazardous materials.

1380 ALI, Additional information

A segment specifying the relevant additional information for an item, e.g. country of origin.

1390 DTM, Date/time/period

A segment specifying the date, and when relevant, the time or period of an activity identified by the date/time/period qualifier. e.g. expiration date of the price/sales catalogue for the price item line.

1400 RFF, Reference

A segment identifying a reference, which is related to the described article, by its number.

1410 LOC, Place/location identification

A segment to indicate country of origin and country of the despatch.

1420 DOC, Document/message details

A segment to indicate that a movement certificate is required.

1430 PTY, Priority

A segment to provide a priority which is associated with the item being described.

1440 FTX, Free text

A segment with free text information, in coded or clear form, used when additional information is needed at the line item levelled within other segment. In computer to computer exchanges such text will normally require the receiver to process this segment manually.

1450 Segment Group 37: CCI-CAV-MEA

A group of segments providing product characteristic and product characteristic details.

1460 CCI, Characteristic/class id

A segment to identify product characteristic and, or the characteristic name and characteristic relevance for the business process.

1470 CAV, Characteristic value

A segment to specify common product characteristic by value in either coded form or in free format.

1480 MEA, Measurements

A segment indicating characteristic value being physical measurement (including measurable quantities and percentages) related to specified product characteristics (for example voltage, percentage of material contained) and where relevant measurement ranges.

1490 Segment Group 38: TAX-MOA-DTM

A group of segments specifying a tax type, category and rate relating to the item.

1500 TAX, Duty/tax/fee details

A segment specifying a tax type, category and rate, or exemption.

1510 MOA, Monetary amount

A segment specifying the amount for the identified tax/fee, e.g. a stamp fee.

1520 DTM, Date/time/period

A segment indicating the date of application of the specified tax.

1530 Segment Group 39: CUX-DTM

A group of segments specifying the currencies and related dates/periods valid for the Price item line.

1540 CUX, Currencies

A segment identifying the currencies required in the Price/sales catalogue, e.g. the Price/sales catalogue currency. A rate of exchange may be given to convert a reference currency into a target currency.

1550 DTM, Date/time/period

A segment specifying the date/time/period related to the rate of exchange.

1560 Segment Group 40: PRI-CUX-APR-RNG-DTM-PCD-LOC

A group of segments identifying the details of the price information for the product or service identified in the PIT segment group.

1570 PRI, Price details

A segment providing either the unit or reference price and the price type, valid for the pricing group.

1580 CUX, Currencies

A segment identifying the currency in which the price is expressed.

1590 APR, Additional price information

A segment to identify additional pricing information related to the class or type of trade and additionally identifying the reason for any change.

1600 RNG, Range details

A segment to identify a quantity or an amount range to which the price information applies.

1610 DTM, Date/time/period

A segment to identify the date/time/period information related to the price information, e.g. period of validity.

1620 PCD, Percentage details

A segment to indicate percentage increase of decrease in price since last information.

1630 LOC, Place/location identification

This segment is used to provide locations related to the price such as market region.

1640 Segment Group 41: ALC-ALI-DTM-SG42-SG43-SG44-SG45-SG46

A group of segments specifying allowances and charges for the price item line. When relevant, additional information, date information, tax details may be indicated. The basis for the calculation of the allowance/charge may be a quantity, a percentage, an amount or a rate and one of the groups 39-40 should be used accordingly.

1650 ALC, Allowance or charge

A segment identifying the charge or allowance and, where necessary its calculation sequence.

1660 ALI, Additional information

A segment indicating that the allowance or charge specified is subject to special conditions owing to origin, customs preference or commercial factors.

1670 DTM, Date/time/period

A segment indicating any dates, times or periods applicable to the allowances and charges specified at detail level.

1680 Segment Group 42: QTY-RNG

A group of segments specifying the quantity of the allowance or charge with its measure unit specifier. A range to which the allowance or charge applies may be specified. e.g. An allowance of a free quantity of 20 pieces may be specified if the quantity of goods ordered is greater than 1000 pieces.

1690 QTY, Quantity

A segment identifying the type of quantity and the quantity related to the allowance or charge.

1700 RNG, Range details

A segment specifying, if required, the range to which the allowance or charge applies.

1710 Segment Group 43: PCD-RNG

A group of segments specifying the percentage for the allowance or charge, e.g. The allowance/charge amount is calculated as 5% of the goods value or a price reduction of 5% may be specified if the goods quantity ordered is within the range 5 tons to 10 tons.

1720 PCD, Percentage details

A segment identifying the percentage and the percentage basis for the calculation of the allowance or charge.

1730 RNG, Range details

A segment specifying, if required, a range for the application of the percentage.

1740 Segment Group 44: MOA-RNG

A group of segments specifying a monetary amount for an allowance or charge. A range to which the allowance or charge applies can be specified, e.g. an allowance of 5000 BEF may be specified if goods value ordered is greater than 100000 BEF.

1750 MOA, Monetary amount

A segment identifying the monetary amount for the allowance or charge.

1760 RNG, Range details

A segment specifying, if required, a range for the application of the allowance/charge amount.

1770 Segment Group 45: RTE-RNG

A group of segments specifying the rate per unit and basis to which the allowance or charge applies, e.g. the allowance/charge rate is 3 DEM per 10 tons.

1780 RTE, Rate details

A segment specifying the rate per unit and the basis for calculation.

1790 RNG, Range details

A segment specifying, if required, the range for the application of the allowance/charge rate.

1800 Segment Group 46: TAX-MOA-DTM

A group of segments of segments specifying tax related information for the allowance or charge.

1810 TAX, Duty/tax/fee details

A segment specifying the tax type, category, and rate, or exemption, related to the allowance or charge.

1820 MOA, Monetary amount

A segment specifying a monetary amount for the allowance or charge. (e.g. a stamp fee).

1830 DTM, Date/time/period

A segment indicating the date of application of the specified tax.

1840 Segment Group 47: PAC-MEA-QTY-HAN

A group of segments identifying the packaging, physical dimensions, for the Price item line. If required, providing handling instructions and notification of hazardous materials.

1850 PAC, Package

A segment specifying the physical type of packages for the Price item line.

1860 MEA, Measurements

A segment specifying physical measurements of packages described in the PAC segment e.g. box size.

1870 QTY, Quantity

A segment specifying the maximum quantity number of packages which can be stacked safely on another package and/or the number of items normally contained within the package.

1880 HAN, Handling instructions

A segment providing information on required handling of materials in the price item line, and additionally, if required, notifying hazardous materials.

1890 Segment Group 48: PYT-DTM-PCD-MOA

A group of segments specifying the terms of payment applicable for the Price item line.

1900 PYT, Payment terms

A segment identifying the payment terms and date/time basis.

1910 DTM, Date/time/period

A segment giving the specific date/time/period, if needed, of any payments, discounts, instalments etc.

1920 PCD, Percentage details

A segment specifying the discount, interest, penalty as well as instalment percentage.

1930 MOA, Monetary amount

A segment specifying amounts related to payment discounts, penalties or instalments.

1940 Segment Group 49: TDT-LOC

A group of segments identifying the mode and means of transport, and locations relating to the Price line item.

1950 TDT, Transport information

A segment specifying the mode, means and identification of the transport for the goods listed in the Price/sales catalogue. If required, the carrier's address should be indicated within the NAD segment group.

1960 LOC, Place/location identification

A segment identifying locations relevant to the transport specified in the TDT segment, e.g. place of departure or border crossing point.

1970 Segment Group 50: TOD-LOC

A group of segments indicating the terms of delivery for the Price line item.

1980 TOD, Terms of delivery or transport

A segment identifying the delivery terms to be used. e.g. UN INCOTERMS.

1990 LOC, Place/location identification

A segment identifying locations relevant to the delivery terms specified in the TOD segment.

2000 Segment Group 51: EFI-CED-COM-RFF-DTM-QTY

A group of segments that refers through an external file identification to each of the external files and giving additional information about each of the files.

2010 EFI, External file link identification

This segment will identify the external files by indicating the file name, file number and its sequence number in an exchange.

2020 CED, Computer environment details

To give precise definitions of all necessary elements belonging to the configuration of a computer system, e.g. hardware, firmware, operating system, communication and application software.

2030 COM, Communication contact

To identify a communication number of a department or a person to whom communication should be directed.

2040 RFF, Reference

A segment giving a reference related to the file identified by a previous external file link identification segment.

2050 DTM, Date/time/period

This segment will convey the date/time details of the external file.

2060 QTY, Quantity

The size/volume of the external file identified in the previous external file link identification segment.

2070 Segment Group 52: NAD-SG53

A group of segments identifying a party with associated information for the current product.

2080 NAD, Name and address

A segment identifying names and addresses of the parties, in coded or clear form, and their functions. It is recommended that where possible only the coded form of the party identification should be specified.

2090 Segment Group 53: CTA-COM

A group of segments giving contact details of the person or department within the party.

2100 CTA, Contact information

A segment to identify a person or a department and to whom the communication should be directed.

2110 COM, Communication contact

A segment to identify a communication type and number for the current contact.

2120 Segment Group 54: TRU-DTM

A group of segments to identify technical rules applicable for the actual product and the rules' issue dates.

2130 TRU, Technical rules

A segment identifying technical rules and conditions relevant for the current product.

2140 DTM, Date/time/period

A segment specifying dates associated with the technical rules.

2150 Segment Group 55: DGS-QTY-FTX

A group of segments containing dangerous goods information relevant to the current product.

2160 DGS, Dangerous goods

A segment providing dangerous goods information for the current product by using relevant dangerous goods identification.

2170 QTY, Quantity

A segment to specify quantity for the given dangerous goods.

2180 FTX, Free text

A segment with free text information, in clear form, related to dangerous goods. In computer to computer exchanges such text will normally require the receiver to process this segment manually.

2190 Segment Group 56: HYN-PIA-QTY-FTX-SG57-SG58-SG59

A group of segments to specify hierarchical connections from the given product to higher or lower levelled products.

2200 HYN, Hierarchy information

A segment to identify hierarchical connections from the given product to higher or lower levelled products and its function.

2210 PIA, Additional product id

A segment providing either additional identification of the product specified in the hierarchy segment or any substitute product identification.

2220 QTY, Quantity

A segment identifying the child product's quantity contained within the identified parent product.

2230 FTX, Free text

A segment with free text information, in coded or clear form, used when additional information on the actual product and its hierarchical connections is required.

2240 Segment Group 57: RFF-DTM

A group of segments to provide references linked to the hierarchical item and where necessary the reference date.

2250 RFF, Reference

A segment identifying the reference linked to the hierarchical item, for example the drawing number on a wiring diagram.

2260 DTM, Date/time/period

A segment specifying the date and, or time related to the reference.

2270 Segment Group 58: CCI-CAV-MEA

A group of segments to identify characteristics depending on the product's use within the hierarchy specific to the identified party.

2280 CCI, Characteristic/class id

A segment to identify product characteristic and, or the characteristic name and characteristic relevance for the business process.

2290 CAV, Characteristic value

A segment to specify product characteristic by value in either coded form or in free format.

2300 MEA, Measurements

A segment indicating characteristic values being physical measurements (including measurable quantities and percentages) related to specified product characteristics (for example voltage, percentage of material contained) and where relevant measurement ranges. The MEA-segment is repeatable to allow the indication of a number of applicable measurable values, for example one electric appliance may be switchable for different voltages: 110V, 220V, 240V and 380V.

2310 Segment Group 59: NAD-PIA-QTY-SG60

A segment group to specify party dependent information for the actual product in the given hierarchy.

2320 NAD, Name and address

A segment identifying a party preferably in coded form to which specific product and hierarchical item characteristics apply.

2330 PIA, Additional product id

A segment providing additional identification(s) of the hierarchically linked product that are specific to the identified party, for example an additional number from another origin to identify the higher or lower levelled product relevant to the identified party.

2340 QTY, Quantity

A segment identifying the child product's quantity contained within the identified parent product if specially defined by the named party.

2350 Segment Group 60: CCI-CAV-MEA

A group of segments to identify characteristics depending on the product's use within the hierarchy specific to the identified party.

2360 CCI, Characteristic/class id

A segment to identify product characteristic and, or the characteristic name and characteristic relevance for the business process.

2370 CAV, Characteristic value

A segment to specify product-characteristic by value in either coded form or in free format.

2380 MEA, Measurements

A segment indicating characteristic values being physical measurements (including measurable quantities and percentages) related to specified product characteristics (for example voltage, percentage of material contained) and where relevant measurement ranges. The MEA-segment is repeatable to allow the indication of a number of applicable measurable values, for example one electric appliance may be switchable for different voltages: 110V, 220V, 240V and 380V.

2390 UNT, Message trailer

A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message.


4.2. Segment index (alphabetical sequence by tag)

ALC Allowance or charge
ALI Additional information
APR Additional price information
BGM Beginning of message
CAV Characteristic value
CCI Characteristic/class id
CED Computer environment details
COM Communication contact
CTA Contact information
CUX Currencies
DGS Dangerous goods
DOC Document/message details
DTM Date/time/period
EFI External file link identification
FTX Free text
HAN Handling instructions
HYN Hierarchy information
IMD Item description
LIN Line item
LOC Place/location identification
MEA Measurements
MOA Monetary amount
NAD Name and address
PAC Package
PCD Percentage details
PGI Product group information
PIA Additional product id
PRI Price details
PTY Priority
PYT Payment terms
QTY Quantity
RFF Reference
RNG Range details
RTE Rate details
TAX Duty/tax/fee details
TDT Transport information
TOD Terms of delivery or transport
TRU Technical rules
UNH Message header
UNT Message trailer

4.3. Message structure


4.3.1. Segment table

├─UNH Message header ×1 (M)
├─BGM Beginning of message ×1 (M)
├─DTM Date/time/period ×35 (M)
├─ALI Additional information ×5 (C)
├─FTX Free text ×99 (C)
├─Segment Group 1 ×99 (C)
├─RFF Reference ×1 (M)
└─DTM Date/time/period ×5 (C)
├─Segment Group 2 ×99 (C)
├─NAD Name and address ×1 (M)
├─LOC Place/location identification ×25 (C)
├─Segment Group 3 ×10 (C)
├─RFF Reference ×1 (M)
└─DTM Date/time/period ×5 (C)
└─Segment Group 4 ×5 (C)
──├─CTA Contact information ×1 (M)
──└─COM Communication contact ×5 (C)
├─Segment Group 5 ×5 (C)
├─TAX Duty/tax/fee details ×1 (M)
├─MOA Monetary amount ×1 (C)
└─DTM Date/time/period ×1 (C)
├─Segment Group 6 ×20 (C)
├─CUX Currencies ×1 (M)
└─DTM Date/time/period ×5 (C)
├─Segment Group 7 ×10 (C)
├─PYT Payment terms ×1 (M)
├─DTM Date/time/period ×5 (C)
├─PCD Percentage details ×1 (C)
└─MOA Monetary amount ×1 (C)
├─Segment Group 8 ×10 (C)
├─TDT Transport information ×1 (M)
└─LOC Place/location identification ×10 (C)
├─Segment Group 9 ×5 (C)
├─TOD Terms of delivery or transport ×1 (M)
└─LOC Place/location identification ×2 (C)
├─Segment Group 10 ×10 (C)
├─ALC Allowance or charge ×1 (M)
├─ALI Additional information ×5 (C)
├─DTM Date/time/period ×9 (C)
├─Segment Group 11 ×10 (C)
├─QTY Quantity ×1 (M)
└─RNG Range details ×1 (C)
├─Segment Group 12 ×10 (C)
├─PCD Percentage details ×1 (M)
└─RNG Range details ×1 (C)
├─Segment Group 13 ×10 (C)
├─MOA Monetary amount ×1 (M)
└─RNG Range details ×1 (C)
├─Segment Group 14 ×10 (C)
├─RTE Rate details ×1 (M)
└─RNG Range details ×1 (C)
└─Segment Group 15 ×5 (C)
──├─TAX Duty/tax/fee details ×1 (M)
──├─MOA Monetary amount ×1 (C)
──└─DTM Date/time/period ×1 (C)
├─Segment Group 16 ×9 (C)
├─TRU Technical rules ×1 (M)
└─DTM Date/time/period ×9 (C)
├─Segment Group 17 ×1000 (C)
├─PGI Product group information ×1 (M)
├─DTM Date/time/period ×15 (C)
├─QTY Quantity ×10 (C)
├─ALI Additional information ×5 (C)
├─FTX Free text ×5 (C)
├─Segment Group 18 ×10 (C)
├─CUX Currencies ×1 (M)
└─DTM Date/time/period ×5 (C)
├─Segment Group 19 ×100 (C)
├─PRI Price details ×1 (M)
├─CUX Currencies ×1 (C)
├─APR Additional price information ×99 (C)
├─RNG Range details ×1 (C)
└─DTM Date/time/period ×5 (C)
├─Segment Group 20 ×10 (C)
├─TAX Duty/tax/fee details ×1 (M)
├─MOA Monetary amount ×1 (C)
└─DTM Date/time/period ×1 (C)
├─Segment Group 21 ×99 (C)
├─ALC Allowance or charge ×1 (M)
├─ALI Additional information ×5 (C)
├─Segment Group 22 ×1 (C)
├─QTY Quantity ×1 (M)
└─RNG Range details ×1 (C)
├─Segment Group 23 ×1 (C)
├─PCD Percentage details ×1 (M)
└─RNG Range details ×1 (C)
├─Segment Group 24 ×2 (C)
├─MOA Monetary amount ×1 (M)
└─RNG Range details ×1 (C)
├─Segment Group 25 ×1 (C)
├─RTE Rate details ×1 (M)
└─RNG Range details ×1 (C)
└─Segment Group 26 ×5 (C)
──├─TAX Duty/tax/fee details ×1 (M)
──├─MOA Monetary amount ×1 (C)
──└─DTM Date/time/period ×1 (C)
├─Segment Group 27 ×20 (C)
├─NAD Name and address ×1 (M)
├─LOC Place/location identification ×5 (C)
├─Segment Group 28 ×10 (C)
├─RFF Reference ×1 (M)
└─DTM Date/time/period ×5 (C)
└─Segment Group 29 ×5 (C)
──├─CTA Contact information ×1 (M)
──└─COM Communication contact ×5 (C)
├─Segment Group 30 ×10 (C)
├─PYT Payment terms ×1 (M)
├─DTM Date/time/period ×5 (C)
├─PCD Percentage details ×1 (C)
└─MOA Monetary amount ×1 (C)
├─Segment Group 31 ×10 (C)
├─TDT Transport information ×1 (M)
└─LOC Place/location identification ×10 (C)
├─Segment Group 32 ×5 (C)
├─TOD Terms of delivery or transport ×1 (M)
└─LOC Place/location identification ×2 (C)
├─Segment Group 33 ×10 (C)
├─PAC Package ×1 (M)
├─MEA Measurements ×10 (C)
└─HAN Handling instructions ×5 (C)
├─Segment Group 34 ×99 (C)
├─EFI External file link identification ×1 (M)
├─CED Computer environment details ×99 (C)
├─COM Communication contact ×9 (C)
├─RFF Reference ×9 (C)
├─DTM Date/time/period ×9 (C)
└─QTY Quantity ×9 (C)
├─Segment Group 35 ×9 (C)
├─TRU Technical rules ×1 (M)
└─DTM Date/time/period ×9 (C)
└─Segment Group 36 ×99999 (C)
──├─LIN Line item ×1 (M)
──├─PIA Additional product id ×99 (C)
──├─IMD Item description ×999 (C)
──├─MEA Measurements ×99 (C)
──├─QTY Quantity ×10 (C)
──├─HAN Handling instructions ×5 (C)
──├─ALI Additional information ×5 (C)
──├─DTM Date/time/period ×10 (C)
──├─RFF Reference ×99 (C)
──├─LOC Place/location identification ×1 (C)
──├─DOC Document/message details ×1 (C)
──├─PTY Priority ×99 (C)
──├─FTX Free text ×999 (C)
──├─Segment Group 37 ×999 (C)
──├─CCI Characteristic/class id ×1 (M)
──├─CAV Characteristic value ×10 (C)
──└─MEA Measurements ×10 (C)
──├─Segment Group 38 ×10 (C)
──├─TAX Duty/tax/fee details ×1 (M)
──├─MOA Monetary amount ×1 (C)
──└─DTM Date/time/period ×1 (C)
──├─Segment Group 39 ×5 (C)
──├─CUX Currencies ×1 (M)
──└─DTM Date/time/period ×5 (C)
──├─Segment Group 40 ×100 (C)
──├─PRI Price details ×1 (M)
──├─CUX Currencies ×1 (C)
──├─APR Additional price information ×99 (C)
──├─RNG Range details ×1 (C)
──├─DTM Date/time/period ×5 (C)
──├─PCD Percentage details ×5 (C)
──└─LOC Place/location identification ×99 (C)
──├─Segment Group 41 ×99 (C)
──├─ALC Allowance or charge ×1 (M)
──├─ALI Additional information ×5 (C)
──├─DTM Date/time/period ×9 (C)
──├─Segment Group 42 ×10 (C)
──├─QTY Quantity ×1 (M)
──└─RNG Range details ×1 (C)
──├─Segment Group 43 ×99 (C)
──├─PCD Percentage details ×1 (M)
──└─RNG Range details ×1 (C)
──├─Segment Group 44 ×10 (C)
──├─MOA Monetary amount ×1 (M)
──└─RNG Range details ×1 (C)
──├─Segment Group 45 ×10 (C)
──├─RTE Rate details ×1 (M)
──└─RNG Range details ×1 (C)
──└─Segment Group 46 ×5 (C)
────├─TAX Duty/tax/fee details ×1 (M)
────├─MOA Monetary amount ×1 (C)
────└─DTM Date/time/period ×1 (C)
──├─Segment Group 47 ×999 (C)
──├─PAC Package ×1 (M)
──├─MEA Measurements ×10 (C)
──├─QTY Quantity ×99 (C)
──└─HAN Handling instructions ×5 (C)
──├─Segment Group 48 ×10 (C)
──├─PYT Payment terms ×1 (M)
──├─DTM Date/time/period ×5 (C)
──├─PCD Percentage details ×1 (C)
──└─MOA Monetary amount ×1 (C)
──├─Segment Group 49 ×10 (C)
──├─TDT Transport information ×1 (M)
──└─LOC Place/location identification ×10 (C)
──├─Segment Group 50 ×5 (C)
──├─TOD Terms of delivery or transport ×1 (M)
──└─LOC Place/location identification ×2 (C)
──├─Segment Group 51 ×99 (C)
──├─EFI External file link identification ×1 (M)
──├─CED Computer environment details ×99 (C)
──├─COM Communication contact ×9 (C)
──├─RFF Reference ×9 (C)
──├─DTM Date/time/period ×9 (C)
──└─QTY Quantity ×9 (C)
──├─Segment Group 52 ×99 (C)
──├─NAD Name and address ×1 (M)
──└─Segment Group 53 ×99 (C)
────├─CTA Contact information ×1 (M)
────└─COM Communication contact ×99 (C)
──├─Segment Group 54 ×9 (C)
──├─TRU Technical rules ×1 (M)
──└─DTM Date/time/period ×9 (C)
──├─Segment Group 55 ×9 (C)
──├─DGS Dangerous goods ×1 (M)
──├─QTY Quantity ×9 (C)
──└─FTX Free text ×9 (C)
──└─Segment Group 56 ×999 (C)
────├─HYN Hierarchy information ×1 (M)
────├─PIA Additional product id ×99 (C)
────├─QTY Quantity ×9 (C)
────├─FTX Free text ×99 (C)
────├─Segment Group 57 ×999 (C)
────├─RFF Reference ×1 (M)
────└─DTM Date/time/period ×9 (C)
────├─Segment Group 58 ×99 (C)
────├─CCI Characteristic/class id ×1 (M)
────├─CAV Characteristic value ×9 (C)
────└─MEA Measurements ×99 (C)
────└─Segment Group 59 ×99 (C)
──────├─NAD Name and address ×1 (M)
──────├─PIA Additional product id ×99 (C)
──────├─QTY Quantity ×9 (C)
──────└─Segment Group 60 ×99 (C)
────────├─CCI Characteristic/class id ×1 (M)
────────├─CAV Characteristic value ×99 (C)
────────└─MEA Measurements ×9 (C)
└─UNT Message trailer ×1 (M)

Return to Stylus Studio EDIFACT D04A Messages page.
EDI to XML Mapping for EDIFACT/X12 Convert EDIFACT/X12 Schemas to XML Schema Legacy Data Conversion Tools Access Relational Data as XML Visual XSLT and XQuery Mapping Tools EDIFACT to XML
Return to Stylus Studio EDIFACT home page.

Return to Stylus Studio home page.
Site Map | Privacy Policy | Terms of Use | Trademarks
Stylus Scoop XML Newsletter:
W3C Member
Stylus Studio® and DataDirect XQuery ™are from DataDirect Technologies, is a registered trademark of Progress Software Corporation, in the U.S. and other countries. © 2004-2016 All Rights Reserved.