Frames | No Frames

Return to Stylus Studio EDIFACT home page.
Return to Stylus Studio EDIFACT D01A Messages page.
UN/EDIFACT
UNITED NATIONS STANDARD MESSAGE (UNSM)

Statement of account message

Version:D
Release:01A
Contr. Agency:UN
Revision:4
Date:2000-10-26
SOURCE:D2 Purchasing (SWG)

CONTENTS
Statement of account message
  1. INTRODUCTION
  2. SCOPE
    1. Functional definition
    2. Field of application
    3. Principles
  3. REFERENCES
  4. TERMS AND DEFINITIONS
    1. Standard terms and definitions
  5. MESSAGE DEFINITION
    1. Segment clarification
      1. Header section
      2. Detail section
      3. Summary section
    2. Segment index (alphabetical sequence by tag)
    3. Message structure
      1. Segment table

For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM General Introduction


This message also occurs in the following versions of this standard:
D93A, D94A, D94B, D95A, D95B, D96A, D96B, D97A, D97B, D98A, D98B, D99A, D99B, D00A, D00B, D01A, D01B, D01C, D02A, D02B, D03A, D03B, D04A, D04B

0. INTRODUCTION

This specification provides the definition of the Statement of account message (STATAC) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport.


1. SCOPE


1.1. Functional definition

A Statement of Account is a communication from a Seller or his agent to a Buyer or his agent, providing information about the status of an account at a specific point in time. It is used as an aid to reconciliation. At the same time it may be a reminder of payment due.


1.2. Field of application

The Statement of account message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry.


1.3. Principles

  • A Statement of Account may refer to only one account, in one currency.
  • A statement of Account contains only outstanding debts and does not specify any debts which have been cleared since the previous Statement.
  • A Statement of Account may be initiated at any time by the Seller, depending upon agreement between the Buyer and the Seller.

2. REFERENCES

See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1.


3. TERMS AND DEFINITIONS


3.1. Standard terms and definitions

See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2.


4. MESSAGE DEFINITION


4.1. Segment clarification

This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements.

The following guidelines and principles apply to the whole message and are intended to facilitate the understanding and implementation of the message:

All specified dates/times should be in the format 'ccyymmdd'/'hhmm' unless all parties involved in the transaction agree that there is a functional requirement for an alternative format. Periods should be specified as whole numbers representing the required period as indicated in the format qualifier (weeks, months, etc.)

Where a choice of code or text is given only the code element should be used wherever possible. Conditional data that is not required in the message should not be included.

Care must be taken that the segment qualifier in dependent segments do not conflict with the segment qualifier of the trigger segment of a group.

Free text information within the message should be avoided as this inhibits automatic processing. It is only used when additional information that cannot be accommodated within the other segments is required.


4.1.1. Header section

Information to be provided in the Header section:

0010 UNH, Message header

A service segment starting and uniquely identifying a message. The message type code for the Statement of account message is STATAC.

Note: Statement of account messages conforming to this document must contain the following data in segment UNH, composite S009:

Data element0065STATAC
0052D
005401A
0051UN

0020 BGM, Beginning of message

A segment by which the sender must uniquely identify the Statement of Account.

0030 DTM, Date/time/period

A segment specifying the dates, and when relevant, the times related to the whole message. The segment must be specified at least once to specify the message date as allocated by the sender.

0040 RFF, Reference

A segment for referencing documents which relate to the whole message.

0050 CUX, Currencies

A segment identifying the currency of the Statement of Account. The payment currency is the default currency for all amounts, it must be specified in international transactions.

0060 Segment Group 1: NAD-SG2

A group of segments identifying the parties involved in the transaction and, optionally the contact points and numbers.

0070 NAD, Name and address

A segment to identify a party name and address, either by coded identification or in clear form.

0080 Segment Group 2: CTA-COM

A group of segments identifying the contact person or department for a trading party and specifying the communication channel and number.

0090 CTA, Contact information

A segment to identify a person or department and their function, to whom communications should be directed.

0100 COM, Communication contact

A segment specifying the communications channel and number for the specified contact.


4.1.2. Detail section

Information to be provided in the Detail section:

0110 Segment group 3: DOC-MOA-DTM-RFF A group of segments providing details of all documents, e.g. invoices, credit notes, etc., to which the Statement of Account refers. It contains details of the monetary values associated with the documents and of relevant dates. There must be at least one occurrence of this group within the Statement of Account Message.

0120 DOC, Document/message details

A segment identifying the reference document against which payment is to be made.

0130 MOA, Monetary amount

A segment to specify the required amounts for the referenced document e.g. amount due, discount amount, payment amount.

0140 DTM, Date/time/period

A segment to specify the date of the referenced document and to indicate any other relevant dates applicable, e.g. Due date, Tax point date, etc.

0150 RFF, Reference

A segment for the inclusion of any additional references related to the reference document.


4.1.3. Summary section

Information to be provided in the Summary section:

0160 UNS, Section control

A service segment placed at the start of the summary section to avoid segment collision.

0170 MOA, Monetary amount

A segment specifying the total amount pertaining to the message. The outstanding balance amount is mandatory and is taken as given, i.e. it is not subject to recalculation.

0180 FTX, Free text

A segment for free text information, in coded or clear form.

0190 UNT, Message trailer

A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message.


4.2. Segment index (alphabetical sequence by tag)

BGM Beginning of message
COM Communication contact
CTA Contact information
CUX Currencies
DOC Document/message details
DTM Date/time/period
FTX Free text
MOA Monetary amount
NAD Name and address
RFF Reference
UNH Message header
UNS Section control
UNT Message trailer

4.3. Message structure


4.3.1. Segment table

├─UNH Message header ×1 (M)
├─BGM Beginning of message ×1 (M)
├─DTM Date/time/period ×5 (M)
├─RFF Reference ×5 (C)
├─CUX Currencies ×1 (C)
├─Segment Group 1 ×99 (M)
├─NAD Name and address ×1 (M)
└─Segment Group 2 ×5 (C)
──├─CTA Contact information ×1 (M)
──└─COM Communication contact ×5 (C)
├─Segment Group 3 ×20000 (M)
├─DOC Document/message details ×1 (M)
├─MOA Monetary amount ×5 (M)
├─DTM Date/time/period ×5 (C)
└─RFF Reference ×5 (C)
├─UNS Section control ×1 (M)
├─MOA Monetary amount ×9 (M)
├─FTX Free text ×99 (C)
└─UNT Message trailer ×1 (M)

Return to Stylus Studio EDIFACT D01A Messages page.
EDI to XML Mapping for EDIFACT/X12 Convert EDIFACT/X12 Schemas to XML Schema Legacy Data Conversion Tools Access Relational Data as XML Visual XSLT and XQuery Mapping Tools EDIFACT to XML
Return to Stylus Studio EDIFACT home page.

Return to Stylus Studio home page.
Site Map | Privacy Policy | Terms of Use | Trademarks
Stylus Scoop XML Newsletter:
W3C Member
Stylus Studio® and DataDirect XQuery ™are from DataDirect Technologies, is a registered trademark of Progress Software Corporation, in the U.S. and other countries. © 2004-2016 All Rights Reserved.