[XSL-LIST Mailing List Archive Home] [By Thread] [By Date] [Recent Entries] [Reply To This Message]

Re: Re: Keeping a running total?

Subject: Re: Re: Keeping a running total?
From: Steve <subsume@xxxxxxxxx>
Date: Mon, 17 Jul 2006 17:01:18 -0400
Re:  Re: Keeping a running total?
You share my confusion. Is there some obvious difference between my
interpretation of the factory template application?

This morning, I was able to call the template in such a way as to
achieve recursion (except it kept going beyond a perfectly
well-presented result set). Now, but of course, I can't figure out how
I did that.

I was so sure I was going to have this beast tackled today, too. =( 5 o'clock.

-Steve

On 7/17/06, didoss@xxxxxxxxxxx <didoss@xxxxxxxxxxx> wrote:
Steve -

Maybe I'm confused, but it looks like you are not keeping a running total between services,...I read the template as saying that A should be able to handle 1920.

From previous discussions, I would think that means that A can handle a total of 1920, and therefore by service 4, should only be able to handle (1920 - 191.25 - 532.25 - 32) more, and then B and C kick in. So, by service 5, everybody is already maxed out, and there is no one to handle it.

What I see below leads me to believe that it resets the counter with each service, and that's why A is able to handle more in service 5.


Dianne


 -------------- Original message ----------------------
From: Steve <subsume@xxxxxxxxx>
> Your solution is wonderful, however, I have one problem while applying it.
>
> In item 4 both the A and B thresholds are reached. It spills over as
> expected to C but then A becomes its Quota, 1920.
>
> Exhaustive, sorry.
>
> XML-------------
>
> <Records>
>       <Record>
>               <service>1</service>
>               <hours>191.25</hours>
>       </Record>
>       <Record>
>               <service>2</service>
>               <hours>532.25</hours>
>       </Record>
>       <Record>
>               <service>3</service>
>               <hours>32</hours>
>       </Record>
>       <Record>
>               <service>4</service>
>               <hours>2858.5</hours>
>       </Record>
>       <Record>
>               <service>5</service>
>               <hours>244.3</hours>
>       </Record>
> <!--  etc -->
> Output-----------
>
> <out service="1" Total="191.25" A="191.25" B="0" C="0" Other="0" />
> <out service="2" Total="532.25" A="532.25" B="0" C="0" Other="0"  />
> <out service="3" Total="32" A="32" partB="0" C="0" Other="0"  />
> <out service="4" Total="2858.5" A="1920" B="350" C="588.5" Other="0"  />
> <out service="5" Total="244.3" A="244.3" B="0" C="0" Other="0" />
>              (etc....)
> XSL--------------
>
> <xsl:template match="/" >
>       <xsl:apply-templates select="$services//Record">
>               <xsl:with-param name="leftA" select="1920" />
>               <xsl:with-param name="leftB" select="350" />
>               <xsl:with-param name="leftC" select="878" />
>       </xsl:apply-templates>
> </xsl:template>
>
> <!--
> ***When I replace the above $services//Record with $services/Records
> (the parent) all output looks like <out service='x' total='T' A='0'
> B='0' C='0' Other='T' />
> -->
>
>
> <xsl:template match="Record">
>       <!-- running totals of hours already used   -->
>       <xsl:param name="used">0</xsl:param>
>       <xsl:param name="usedA">0</xsl:param>
>       <xsl:param name="usedB">0</xsl:param>
>       <xsl:param name="usedC">0</xsl:param>
>       <!-- running totals of quota not used   -->
>       <xsl:param name="leftA">0</xsl:param>
>       <xsl:param name="leftB">0</xsl:param>
>       <xsl:param name="leftC">0</xsl:param>
>       <xsl:choose>
>               <!-- Capacity used up, output used and move on   -->
>               <xsl:when test="(hours = $used)">
>                       <out service="{service}" Total = "{hours}" A="{$usedA}"
> partB="{$usedB}" C="{$usedC}" Other="{$used - ($usedA + $usedB +
> $usedC)}" />
>                       <xsl:apply-templates
> select="following-sibling::Record[0]">
>                               <xsl:with-param name="leftA" select="$leftA" />
>                               <xsl:with-param name="leftB" select="$leftB" />
>                               <xsl:with-param name="leftC" select="$leftC" />
>                       </xsl:apply-templates>
>               </xsl:when>
>               <xsl:when test="not($leftA = 0)">
>                       <xsl:choose>
>                               <xsl:when test="($leftA &gt;= (hours - $used))">
>                                       <xsl:apply-templates select=".">
>                                               <xsl:with-param name="used"
> select="hours" />
>                                               <xsl:with-param name="usedA"
> select="($usedA + hours - $used)" />
>                                               <xsl:with-param name="leftA"
> select="($leftA - (hours - $used))" />
>                                               <xsl:with-param name="leftB"
> select="$leftB" />
>                                               <xsl:with-param name="leftC"
> select="$leftC" />
>                                       </xsl:apply-templates>
>                               </xsl:when>
>                               <xsl:otherwise>
>                                       <xsl:apply-templates select=".">
>                                               <xsl:with-param name="used"
> select="($used + $leftA)" />
>                                               <xsl:with-param name="usedA"
> select="($usedA + $leftA)" />
>                                               <xsl:with-param name="leftB"
> select="$leftB" />
>                                               <xsl:with-param name="leftC"
> select="$leftC" />
>                                       </xsl:apply-templates>
>                               </xsl:otherwise>
>                       </xsl:choose>
>               </xsl:when>
>               <xsl:when test="not($leftB = 0)">
>                       <xsl:choose>
>                               <xsl:when test="($leftB &gt;= (hours - $used))">
>                                       <xsl:apply-templates select=".">
>                                               <xsl:with-param name="used"
> select="hours" />
>                                               <xsl:with-param name="usedA"
> select="$usedA" />
>                                               <xsl:with-param name="usedB"
> select="($usedB +     hours - $used)" />
>                                               <xsl:with-param name="leftB"
> select="($leftB - (hours - $used))" />
>                                               <xsl:with-param name="leftC"
> select="$leftC" />
>                                       </xsl:apply-templates>
>                               </xsl:when>
>                               <xsl:otherwise>
>                                       <xsl:apply-templates select=".">
>                                               <xsl:with-param name="used"
> select="($used + $leftB)" />
>                                               <xsl:with-param name="usedA"
> select="$usedA" />
>                                               <xsl:with-param name="usedB"
> select="($usedB + $leftB)" />
>                                               <xsl:with-param name="leftC"
> select="$leftC" />
>                                       </xsl:apply-templates>
>                               </xsl:otherwise>
>                       </xsl:choose>
>               </xsl:when>
>               <xsl:when test="not($leftC = 0)">
>                       <xsl:choose>
>                               <xsl:when test="($leftC &gt;= (hours - $used))">
>                                       <xsl:apply-templates select=".">
>                                               <xsl:with-param name="used"
> select="hours" />
>                                               <xsl:with-param name="usedA"
> select="$usedA" />
>                                               <xsl:with-param name="usedB"
> select="$usedB" />
>                                               <xsl:with-param name="leftB"
> select="($leftB - (hours - $used))"
> />                                                    <xsl:with-param
> name="usedC"  elect="($usedC + hours -
> $used)" />
>                                               <xsl:with-param name="leftC"
> select="($leftC -(hours - $used))" />
>                                       </xsl:apply-templates>
>                               </xsl:when>
>                               <xsl:otherwise>
>                                       <xsl:apply-templates select=".">
>                                               <xsl:with-param name="usedA"
> select="$usedA" />
>                                               <xsl:with-param name="usedB"
> select="$usedB" />
>                                               <xsl:with-param name="used"
> select="($used + leftB)" />
>                                               <xsl:with-param name="usedC"
> select="($usedC + $leftC)" />
>                                       </xsl:apply-templates>
>                               </xsl:otherwise>
>                       </xsl:choose>
>               </xsl:when>
>               <xsl:otherwise>
>                       <xsl:apply-templates select=".">
>                               <xsl:with-param name="used" select="hours" />
>                               <xsl:with-param name="usedA" select="$usedA" />
>                               <xsl:with-param name="usedB"  select="$usedB" />
>                               <xsl:with-param name="usedC"  select="$usedC" />
>                       </xsl:apply-templates>
>               </xsl:otherwise>
>       </xsl:choose>
> </xsl:template>
> -----
>
> On 7/12/06, Andrew Franz <afranz0@xxxxxxxxxxxxxxxx> wrote:
> > Okay, assuming the following input:
> >
> > <xml>
> >  <factory x="A" capacity = "3" />
> >  <factory x="B" capacity= "5" />
> >   <factory x="C" capacity = "3" />
> >   <factory x="D" capacity = "2" />
> >   <factory x="E" capacity = "2" />
> >   ...etc...
> > </xml>
> >
> >
> > O(N) algorithm using recursion (not tested):
> >
> > <xsl:template match="xml">
> >     <xsl:apply-templates select="factory">
> >         <xsl:with-param name="leftW" select="$Widget_quota" />
> >         <xsl:with-param name="leftG" select="$Gadget_quota" />
> >     <xsl:apply-templates select="factory">
> > </xsl:template>
> >
> > <xsl:template match="factory">
> >     <!-- running totals of capacity already used   -->
> >         <xsl:param name="used">0</xsl:param>
> >         <xsl:param name="usedW">0</xsl:param>
> >         <xsl:param name="usedG">0</xsl:param>
> >     <!-- running totals of quota not used   -->
> >         <xsl:param name="leftW">0</xsl:param>
> >         <xsl:param name="leftG">0</xsl:param>
> >
> >     <xsl:choose>
> >     <!-- Capacity used up, output used and move on   -->
> >     <xsl:when test="(@capacity = $used)">
> >             <out factory="{@x}" Widgets="{$usedW}" Gadgets="{$usedG}"
> > Excess="{$used - ($usedW + $usedG)}" />
> >             <xsl:apply-templates select="following-sibling::factory[1]">
> >                 <xsl:with-param name="leftW" select="$leftW" />
> >                 <xsl:with-param name="leftG" select="$leftG" />
> >             </xsl:apply-templates>
> >     </xsl:when>
> >
> >     <xsl:when test="not($leftW = 0)">
> >         <xsl:choose>
> >         <xsl:when test="($leftW &gt;= (@capacity - $used))">
> >                 <xsl:apply-templates select=".">
> >                     <xsl:with-param name="used" select="@capacity" />
> >                     <xsl:with-param name="usedW" select="($usedW +
> > @capacity - $used)" />
> >                     <xsl:with-param name="leftW" select="($leftW -
> > (@capacity - $used))" />
> >                     <xsl:with-param name="leftG" select="$leftG" />
> >                 </xsl:apply-templates>
> >         </xsl:when>
> >         <xsl:otherwise>
> >                 <xsl:apply-templates select=".">
> >                     <xsl:with-param name="used" select="($used + $leftQ)" />
> >                     <xsl:with-param name="usedW" select="($usedW +
> > $leftW)" />
> >                     <xsl:with-param name="leftG" select="$leftG" />
> >                 </xsl:apply-templates>
> >         </xsl:otherwise>
> >         </xsl:choose>
> >     </xsl:when>
> >
> >     <xsl:when test="not($leftG = 0)">
> >         <xsl:choose>
> >         <xsl:when test="($leftG &gt;= (@capacity - $used))">
> >                 <xsl:apply-templates select=".">
> >                     <xsl:with-param name="used" select="@capacity" />
> >                     <xsl:with-param name="usedW" select="$usedW" />
> >                     <xsl:with-param name="usedG"  select="($usedG +
> > @capacity - $used)" />
> >                     <xsl:with-param name="leftG" select="($leftG -
> > (@capacity - $used))" />
> >                 </xsl:apply-templates>
> >         </xsl:when>
> >         <xsl:otherwise>
> >                 <xsl:apply-templates select=".">
> >                     <xsl:with-param name="used" select="($used + $leftG)" />
> >                     <xsl:with-param name="usedW" select="$usedW" />
> >                     <xsl:with-param name="usedG" select="($usedG +
> > $leftG)" />
> >                 </xsl:apply-templates>
> >         </xsl:otherwise>
> >         </xsl:choose>
> >     </xsl:when>
> >
> >     <xsl:otherwise>
> >                 <xsl:apply-templates select=".">
> >                     <xsl:with-param name="used" select="@capacity" />
> >                     <xsl:with-param name="usedW" select="$usedW" />
> >                     <xsl:with-param name="usedG"  select="$usedG" />
> >                 </xsl:apply-templates>
> >     </xsl:otherwise>
> >
> >     </xsl:choose>
> > </xsl:template>

Current Thread

PURCHASE STYLUS STUDIO ONLINE TODAY!

Purchasing Stylus Studio from our online shop is Easy, Secure and Value Priced!

Buy Stylus Studio Now

Download The World's Best XML IDE!

Accelerate XML development with our award-winning XML IDE - Download a free trial today!

Don't miss another message! Subscribe to this list today.
Email
First Name
Last Name
Company
Subscribe in XML format
RSS 2.0
Atom 0.3
Site Map | Privacy Policy | Terms of Use | Trademarks
Free Stylus Studio XML Training:
W3C Member
Stylus Studio® and DataDirect XQuery ™are products from DataDirect Technologies, is a registered trademark of Progress Software Corporation, in the U.S. and other countries. © 2004-2013 All Rights Reserved.