RE: Can't solve the following XSL transformation

The first stage is a classical grouping problem: see
http://www.jenitennison.com/xslt/grouping for advice on using Muenchian
grouping in XSLT 1.0, or use the new xsl:for-each-group instruction in 2.0.
(Note, XSLT 1.1 doesn't really exist, it was a working draft that wasn't
followed up).

Insert the page breaks in a second pass through the data. This is a little
tricky (I use it as an exercise on courses) and requires processing the
sequence using recursion, passing a parameter in the recursive call that
indicates the number of lines processed so far.

Michael Kay
http://www.saxonica.com/

> -----Original Message-----
> From: John Robb [mailto:john_ok@xxxxxx] 
> Sent: 24 July 2005 22:45
> To: xsl-list@xxxxxxxxxxxxxxxxxxxxxx
> Subject:  Can't solve the following XSL transformation
> 
> I'm a novice in XSLT and doesn't have any experience.Can you help me 
> to perform the following transformation:
> trasformed data should look as follows:
> 
> ****************
> Sector 1
> ****************
> Subsector 1
> ++++++++++++++++
> ID[t]Value
> ----------------
> id1[t]value1
> ...
> idN valueN
> ----------------
> Subsector 2
> ++++++++++++++++
> ID[t]Value
> ----------------
> id1[t]value1
> ...
> idN valueN
> ...
> ****************
> Sector 2
> ****************
> Subsector 1
> ++++++++++++++++
> ID[t]Value
> ----------------
> id1[t]value1
> ...
> idN valueN
> ----------------
> Subsector 2
> ++++++++++++++++
> ID[t]Value
> ----------------
> id1[t]value1
> ...
> idN valueN
> ...
> 
> There is a limitation: no more than 25 data rows (idX valueX) per 
> page.Page breaks (<span style="page-break-before: always"></span>) 
> cannot be inserted in the middle of data section but before 
> sector/subsector only.I'm using XSLT v1.1.
> Here is the xml:
> <?xml version="1.0" encoding="iso-8859-1" ?>
> <data>
> [t]<item id="i1"[t]sector="s1"[t]subsector="u1">561</item>
> [t]<item id="i10"[t]sector="s3"[t]subsector="u4">15</item>
> [t]<item id="i22"[t]sector="s2"[t]subsector="u2">1234</item>
> [t]<item id="i11"[t]sector="s1"[t]subsector="u2">123</item>
> [t]<item id="i17"[t]sector="s1"[t]subsector="u3">165</item>
> [t]<item id="i61"[t]sector="s2"[t]subsector="u1">346</item>
> [t]<item id="i12"[t]sector="s2"[t]subsector="u5">3425</item>
> [t]<item id="i2"[t]sector="s3"[t]subsector="u4">78</item>
> [t]<item id="i14"[t]sector="s3"[t]subsector="u4">51</item>
> [t]<item id="i21"[t]sector="s1"[t]subsector="u5">346</item>
> [t]<item id="i39"[t]sector="s3"[t]subsector="u2">463</item>
> [t]<item id="i44"[t]sector="s2"[t]subsector="u3">151</item>
> [t]<item id="i89"[t]sector="s1"[t]subsector="u1">451</item>
> [t]<item id="i81"[t]sector="s2"[t]subsector="u4">771</item>
> [t]<item id="i36"[t]sector="s2"[t]subsector="u5">5654</item>
> [t]<item id="i27"[t]sector="s3"[t]subsector="u3">362</item>
> [t]<item id="i15"[t]sector="s1"[t]subsector="u5">234</item>
> [t]<item id="i18"[t]sector="s3"[t]subsector="u2">73</item>
> [t]<item id="i51"[t]sector="s3"[t]subsector="u5">567</item>
> [t]<item id="i26"[t]sector="s1"[t]subsector="u4">17</item>
> [t]<item id="i95"[t]sector="s3"[t]subsector="u5">67489</item>
> [t]<item id="i13"[t]sector="s1"[t]subsector="u3">54</item>
> [t]<item id="i71"[t]sector="s1"[t]subsector="u3">2</item>
> [t]<item id="i23"[t]sector="s2"[t]subsector="u1">345</item>
> [t]<item id="i7"[t]sector="s2"[t]subsector="u1">67</item>
> [t]<item id="i80"[t]sector="s1"[t]subsector="u3">7754</item>
> [t]<item id="i9"[t]sector="s3"[t]subsector="u4">343</item>
> [t]<item id="i4"[t]sector="s1"[t]subsector="u2">51</item>
> [t]<item id="i99"[t]sector="s3"[t]subsector="u5">5637</item>
> [t][t]
> [t][t]<sector id="s1">Sector 1</sector>
> [t]<sector id="s2">Sector 2</sector>
> [t]<sector id="s3">Sector 3</sector>
> 
> [t]<subsector id="u1">Subsector 1</subsector>
> [t]<subsector id="u2">Subsector 2</subsector>
> [t]<subsector id="u3">Subsector 3</subsector>
> [t]<subsector id="u4">Subsector 4</subsector>
> [t]<subsector id="u5">Subsector 5</subsector>
> </data>