[XSL-LIST Mailing List Archive Home] [By Thread] [By Date] [Recent Entries] [Reply To This Message]

Re: Problem with position( ) function

Subject: Re: Problem with position( ) function
From: Manolis Mavrikis <M.Mavrikis@xxxxxxxx>
Date: Fri, 28 Nov 2003 03:29:29 +0000 (UTC)
javascript hashmaps
I am not sure what you are trying to do as your JavaScript and what you 
are showing the xslt to generate seems different but I assume you want to 
haver these ACT_DES_COR data there but then your foramt seems very 
complicated. 

Anyway this is not the issue and maybe you don't want/can't change it but 
still I think you over-complicated the matter a lot. Unless you are trying 
to do as well with the template <xsl:template 
match="actividades/ROWSET/ROW">  then I think that (assuming that this is 
waht you want to do)  you just have to call a template when you want to 
construct the array:

Array(<xsl:call-templates select="actividades-indexing"><xsl:with-param 
name="agr_id" select="AGR_ID" /></xsl:call-template>)


<xsl:template name="actividades-indexing">
  <xsl:param name="agr_id" />
  <xsl:for-each select="/yourroot/actividates/ROWSET/ROW[ACT_AGR_ID = 
$agr_id]]]/"/>
	'<xsl:value-of select="position()"/>|<xsl:value-of 
select="ACT_DES_COR" />'
           <xsl:if test = "position() &lt; last()">,</xsl:if>
  </xsl:fot-each>
</xsl:template>

I am sorry I cannot test it at the moment but it seems consistent with 
what you want to do. 

Manolis

p.s. btw I don't know what you want to do with these data assigned in 
the Arrays but in a similiar case I used JavaScript 'hashmaps' to assign things 
into and then when I needed to call them i just refered to them with 
their id


On Thu, 27 Nov 2003, Jaime A Stuardo Bahamondes wrote:

       Hi all..
       
       I have this piece of XML:
       
       <actividades>
         <ROWSET>
           <ROW id="1">
             <ACT_ID>6</ACT_ID>
             <ACT_FEC_ING>27-11-2003 09:43:32</ACT_FEC_ING>
             <ACT_DES_LAR>Finanzas, Impuestos y Política Monetaria</ACT_DES_LAR>
             <ACT_DES_COR>Finanzas, Impuestos y Política Monetaria</ACT_DES_COR>
             <ACT_EST>v</ACT_EST>
             <ACT_AGR_ID>1</ACT_AGR_ID>
           </ROW>
           <ROW id="2">
             <ACT_ID>1</ACT_ID>
             <ACT_FEC_ING>27-11-2003 09:43:31</ACT_FEC_ING>
             <ACT_DES_LAR>Gobierno en General, Municipalidades</ACT_DES_LAR>
             <ACT_DES_COR>Gobierno en General, Municipalidades</ACT_DES_COR>
             <ACT_EST>v</ACT_EST>
             <ACT_AGR_ID>1</ACT_AGR_ID>
           </ROW>
           -......---
       </actividades>
       <agrupaciones>
         <ROWSET>
           <ROW id="1">
             <AGR_ID>1</AGR_ID>
             <AGR_FEC_ING>11-11-2003</AGR_FEC_ING>
             <AGR_FEC_MOD>14-11-2003 11:22:04</AGR_FEC_MOD>
             <AGR_DES_LAR>Administración Publica</AGR_DES_LAR>
             <AGR_DES_COR>Administración Publica</AGR_DES_COR>
             <AGR_EST>v</AGR_EST>
           </ROW>
           <ROW id="2">
             <AGR_ID>2</AGR_ID>
             <AGR_FEC_ING>18-11-2003 11:34:08</AGR_FEC_ING>
             <AGR_DES_LAR>Agricultura</AGR_DES_LAR>
             <AGR_DES_COR>Agricultura</AGR_DES_COR>
             <AGR_EST>v</AGR_EST>
           </ROW>
       </agrupaciones>
       
       
       I'm programming an XSL that generates a JavaScript this way:
       
       var actividades = new Array(2);	// 2 "agrupaciones"
       actividades[0] = new Array(6, 1);	// 6 and 1 are "actividades" corresponding to "agr_id" = 1
       actividades[1] = new Array(7,9,15);	// 7, 9 and 15 are "actividades" corresponding to "agr_id" = 2 (not shown in XML above)
       and so on.
       
       I programmed this XSL:
       
       <xsl:template match="agrupaciones/ROWSET/ROW">
         actividades[<xsl:value-of select="position()-1"/>] = new Array(<xsl:apply-templates select="../../../actividades/ROWSET/ROW"><xsl:with-param name="agr_id"><xsl:value-of select="AGR_ID" /></xsl:with-param></xsl:apply-templates>)
       </xsl:template>
               
       <xsl:template match="actividades/ROWSET/ROW">
         <xsl:param name="agr_id" />
         <xsl:if test="ACT_AGR_ID = $agr_id">'<xsl:value-of select="position()" />|<xsl:value-of select="ACT_DES_COR" />'<xsl:if test = "position() &lt; last() ">,</xsl:if></xsl:if>
       
       </xsl:template>
       
       The problem I have is that the following is generated by those templates:
       
       actividades[0] = new Array(6,1,);		// realize about the last "comma"
       actividades[1] = new Array(7,9,15,);
       
       To avoid that, I placed the condition position() &lt; last(), but I realized that position( ) isn't resetted by each iteration of the template. Any help on this?
       
       And other question. I have placed all the xsl instructions on the same line because if I write the xsl more readable, empty lines are inserted in the generated JavaScript. Is it possible to solve it?
       
       Thanks in advance
       Jaime
       
        XSL-List info and archive:  http://www.mulberrytech.com/xsl/xsl-list
       
       


 XSL-List info and archive:  http://www.mulberrytech.com/xsl/xsl-list


Current Thread

PURCHASE STYLUS STUDIO ONLINE TODAY!

Purchasing Stylus Studio from our online shop is Easy, Secure and Value Priced!

Buy Stylus Studio Now

Download The World's Best XML IDE!

Accelerate XML development with our award-winning XML IDE - Download a free trial today!

Don't miss another message! Subscribe to this list today.
Email
First Name
Last Name
Company
Subscribe in XML format
RSS 2.0
Atom 0.3
Site Map | Privacy Policy | Terms of Use | Trademarks
Free Stylus Studio XML Training:
W3C Member
Stylus Studio® and DataDirect XQuery ™are products from DataDirect Technologies, is a registered trademark of Progress Software Corporation, in the U.S. and other countries. © 2004-2013 All Rights Reserved.