Frames | No Frames

Return to Stylus Studio EDIFACT home page.
Return to Stylus Studio EDIFACT D97B Messages page.
UN/EDIFACT
UNITED NATIONS STANDARD MESSAGE (UNSM)

Container discharge/loading order message

Version:D
Release:97B
Contr. Agency:UN
Revision:4
Date:97-07-25
SOURCE:Joint Transport Group (JM4)

CONTENTS
Container discharge/loading order message
  1. INTRODUCTION
  2. SCOPE
    1. Functional definition
    2. Field of application
    3. Principles
  3. REFERENCES
  4. TERMS AND DEFINITIONS
    1. Standard terms and definitions
  5. MESSAGE DEFINITION
    1. Data segment clarification
    2. Data segment index (alphabetical sequence)
    3. Message structure
      1. Segment table

For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.6, UN/ECE UNSM General Introduction


This message also occurs in the following versions of this standard:
D95A, D95B, D96A, D96B, D97A, D97B, D98A, D98B, D99A, D99B, D00A, D00B, D01A, D01B, D01C, D02A, D02B, D03A, D03B, D04A, D04B

0. INTRODUCTION

This specification provides the definition of the Container discharge/loading order message (COPRAR) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport.


1. SCOPE


1.1. Functional Definition

A message to order to the container terminal that the containers specified have to be discharged from a seagoing vessel or have to be loaded into a seagoing vessel.

This message is part of a total set of container-related messages. These messages serve to facilitate the intermodal handling of containers by streamlining the information exchange. The business scenario for the container messages is clarified in a separate document, called: 'Guide to the scenario of EDIFACT container messages'.


1.2. Field of Application

The Container discharge/loading order message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry.


1.3. Principles

Business area: Loading and discharging of containers/equipment

Sending functions include: Ship's agent, Liner agent

Receiving functions include: Container terminal, Stevedore

In the context of the 'Guide to the scenario of EDIFACT container messages' (as referred to at the start of section 1) the following guidelines, rules and functionality apply to this Container discharge/loading order message:

  • The message contents can be uniquely identified by a combination of the following data elements:
  • ordering customer, coded (NAD)
  • ordering customer agent, coded (NAD)
  • container discharge/loading order reference (RFF)

The ordering customer agent, coded is needed to supplement the unique identification only in the following situation: the agent acts on behalf of several ordering customers issuing the same range of reference numbers for each customer. E.g., the ship's agent acts on behalf of several shipping lines issuing for each shipping line the same range of numbers.

  • A message contains information on only one visit/conveyance of a seagoing container vessel either arriving or departing.
  • A message contains an order for either discharging or loading containers from or into the seagoing container vessel. One order message does not necessarily cover all containers to be loaded/discharged.
  • An indicator for the equipment status may be completed on container level (EQD-segment), e.g., import, export, transhipment, shifter.
  • One shipping line can be specified on message level.
  • The sea-going container vessel and sea voyage number can be specified on message level.
  • For each container its cell position on board the container vessel and its port of discharge can be given.
  • For each container dangerous goods information can be specified.
  • If the container prefix and number is not known (in the loading order message), a supplementary container reference number (Container sequence number) is used to identify a container group in the message to be able to refer to this information of the container(s) in the loading report message.
  • In case of a loading order an equipment guideline can be specified in the message in order to load (empty) containers that cannot be identified by their full prefix and serial numbers. In case of a guideline a combination of size and type and/or a certain range of equipment serial numbers (container prefix and numbers) can be given for a group of one or several containers.
  • Goods item details cannot be completed.

2. REFERENCES

See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 1.


3. TERMS AND DEFINITIONS


3.1. Standard terms and definitions

See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 2.


4. MESSAGE DEFINITION


4.1. Data Segment Clarification

This section should be read in conjunction with the Segment Table which indicate mandatory, conditional and repeating requirements.

0010 UNH, Message header

A service segment starting and uniquely identifying a message. The message type code for the Container discharge/loading order message is COPRAR.

Note: Container discharge/loading order messages conforming to this document must contain the following data in segment UNH, composite S009:

Data element0065COPRAR
0052D
005497B
0051UN

0020 BGM, Beginning of message

A segment to indicate the beginning of a message and to transmit identifying number and the further specification of the message type (in data element 1001: Document/message name, coded), such as Loading order, Discharge order.

0030 DTM, Date/time/period

A segment to indicate a date and/or time applying to the whole message, such as date and time of document or message issue.

0040 FTX, Free text

A segment to specify free form or processable supplementary information, such as: - change information

0050 Segment Group 1: RFF-DTM

A group of segments to specify a reference relating to the whole message, and its date and/or time.

0060 RFF, Reference

A segment to express a reference which applies to the entire message, such as: - container discharge/loading order reference - reference to previous message

0070 DTM, Date/time/period

A segment to indicate date and/or time related to the reference.

0080 Segment Group 2: TDT-RFF-LOC-DTM-FTX

A group of segments to indicate the main carriage means of transport.

0090 TDT, Details of transport

A segment identifying the voyage of the vessel relevant to the message (main transport).

0100 RFF, Reference

A segment identifying a relevant reference number, such as: - shipping - syndicate - marketing organization - conference code

0110 LOC, Place/location identification

A segment to identify a location related to the means of transport, such as: - place of departure/arrival (terminal within the port)

0120 DTM, Date/time/period

A segment identifying a date/time related to the arrival or departure of the vessel, such as: - estimated date/time of arrival/departure

0130 FTX, Free text

A segment giving supplementary information related to the vessel, such as: - transport details remarks

0140 Segment Group 3: NAD-SG4

A group of segments to identify a party and related contacts.

0150 NAD, Name and address

A segment to identify the party's name, address, and function, and other addresses, such as: - message recipient - message sender - ordering customer - ordering customer agent

0160 Segment Group 4: CTA-COM

A group of segments to identify a contact and its communications related to the party.

0170 CTA, Contact information

A segment to identify a person or department of a message sender and/or message recipient, such as: - information contact

0180 COM, Communication contact

A segment to identify a communication number of a person or department to whom communication should be directed.

0190 Segment Group 5: EQD-RFF-EQN-TMD-DTM-LOC-MEA-DIM-TMP-RNG-SEL-

FTX-PCD-DGS-EQA-HAN-SG6-NAD A group of segments to specify containers or groups of containers (in case of guidelines) that are either to be loaded or to be discharged.

0200 EQD, Equipment details

A segment identifying a container, container size/type. The equipment status may be e.g. import, export, transhipment, shifter.

0210 RFF, Reference

A segment identifying a relevant reference number, such as: - container sequence number - upper equipment serial number of range - lower equipment serial number of range - carrier agent's reference numbers - shipping syndicate - marketing organization - container prefix - first part of container number

0220 EQN, Number of units

A segment to specify the number of containers in one guideline that meets the same equipment details information.

0230 TMD, Transport movement details

A segment to indicate a Full Container Load (FCL) or a Less than Full Container Load (LCL).

0240 DTM, Date/time/period

A segment to identify a date/time related to the equipment, such as: - actual arrival/departure date/time - CSC expiration date (International Convention for Safe Containers)

0250 LOC, Place/location identification

A segment to identify a location or country related to the equipment, such as: - stowage cell - (final) place/port of discharge - transhipment place - place of delivery - country of origin/destination

0260 MEA, Measurements

A segment specifying a physical measurement related to the equipment, such as: - gross weight

0270 DIM, Dimensions

A segment specifying physical dimensions related to the equipment, such as: - gross dimensions - off standard dimension general - off standard dimension left - off standard dimension right - off standard dimension back - off standard dimension front

0280 TMP, Temperature

A segment which identifies the transport temperature setting of the container.

0290 RNG, Range details

A segment to specify the transport temperature range setting of the container.

0300 SEL, Seal number

A segment identifying a seal number related to the equipment.

0310 FTX, Free text

A segment to specify supplementary information related to the equipment, such as: - blockade reason - government inspection service - container loading remarks - container remarks - container order information - additional remarks concerning the container - container safety convention plate - continuous examination program (ACEP)

0320 + PCD, Percentage details

A segment to specify percentages related to the equipment such as percentage humidity.

0330 DGS, Dangerous goods

A segment to identify the UN-number and the class of the dangerous goods loaded in the container.

0340 EQA, Attached equipment

A segment to identify clip-on units, such as: - generator sets

0350 HAN, Handling instructions

A segment to specify handling instructions related to the container equipment.

0360 Segment Group 6: TDT-RFF-LOC-DTM

A group of segments to specify the planned on-carriage details in case this message is a discharge order message.

0370 TDT, Details of transport

A segment identifying the on-carriage transport details of the mode, means of transport by which the container will depart after being discharged.

0380 RFF, Reference

A segment identifying a relevant reference number, such as: - shipping line - syndicate - marketing organization - conference code

0390 LOC, Place/location identification

A segment identifying locations related to the transport details, such as: - place of departure

0400 DTM, Date/time/period

A segment to specify a date/time relating to the on-carriage transport, such as arrival or departure date/time.

0410 NAD, Name and address

A segment to specify a related address or party, such as: - container operator

0420 CNT, Control total

A segment to specify the number of containers in the message, explicitly given by the sender.

0430 UNT, Message trailer

A service segment ending a message, giving the total number of segments in the message and the control reference number of the message.


4.2. Data segment index (Alphabetical sequence by tag)

BGM Beginning of message
CNT Control total
COM Communication contact
CTA Contact information
DGS Dangerous goods
DIM Dimensions
DTM Date/time/period
EQA Attached equipment
EQD Equipment details
EQN Number of units
FTX Free text
HAN Handling instructions
LOC Place/location identification
MEA Measurements
NAD Name and address
PCD Percentage details
RFF Reference
RNG Range details
SEL Seal number
TDT Details of transport
TMD Transport movement details
TMP Temperature
UNH Message header
UNT Message trailer

4.3. Message structure


4.3.1. Segment table

├─UNH Message header ×1 (M)
├─BGM Beginning of message ×1 (M)
├─DTM Date/time/period ×9 (C)
├─FTX Free text ×9 (C)
├─Segment Group 1 ×9 (C)
├─RFF Reference ×1 (M)
└─DTM Date/time/period ×9 (C)
├─Segment Group 2 ×1 (M)
├─TDT Details of transport ×1 (M)
├─RFF Reference ×9 (C)
├─LOC Place/location identification ×9 (C)
├─DTM Date/time/period ×9 (C)
└─FTX Free text ×9 (C)
├─Segment Group 3 ×9 (M)
├─NAD Name and address ×1 (M)
└─Segment Group 4 ×9 (C)
──├─CTA Contact information ×1 (M)
──└─COM Communication contact ×9 (C)
├─Segment Group 5 ×9999 (M)
├─EQD Equipment details ×1 (M)
├─RFF Reference ×9 (C)
├─EQN Number of units ×1 (C)
├─TMD Transport movement details ×9 (C)
├─DTM Date/time/period ×9 (C)
├─LOC Place/location identification ×9 (C)
├─MEA Measurements ×9 (C)
├─DIM Dimensions ×9 (C)
├─TMP Temperature ×9 (C)
├─RNG Range details ×9 (C)
├─SEL Seal number ×9 (C)
├─FTX Free text ×9 (C)
├─PCD Percentage details ×9 (C)
├─DGS Dangerous goods ×9 (C)
├─EQA Attached equipment ×9 (C)
├─HAN Handling instructions ×9 (C)
├─Segment Group 6 ×1 (C)
├─TDT Details of transport ×1 (M)
├─RFF Reference ×9 (C)
├─LOC Place/location identification ×9 (C)
└─DTM Date/time/period ×9 (C)
└─NAD Name and address ×9 (C)
├─CNT Control total ×1 (C)
└─UNT Message trailer ×1 (M)

Change indicators
plus sign An addition.
asterisk Addition/substraction/change to a code entry for a particular data element.
hash or pound sign Changes to names.
vertical bar Changes to text for descriptions, notes and functions.
minus sign A deletion.
letter X Marked for deletion.

Return to Stylus Studio EDIFACT D97B Messages page.
EDI to XML Mapping for EDIFACT/X12 Convert EDIFACT/X12 Schemas to XML Schema Legacy Data Conversion Tools Access Relational Data as XML Visual XSLT and XQuery Mapping Tools EDIFACT to XML
Return to Stylus Studio EDIFACT home page.

Return to Stylus Studio home page.
Site Map | Privacy Policy | Terms of Use | Trademarks
Stylus Scoop XML Newsletter:
W3C Member
Stylus Studio® and DataDirect XQuery ™are from DataDirect Technologies, is a registered trademark of Progress Software Corporation, in the U.S. and other countries. © 2004-2016 All Rights Reserved.