Frames | No Frames

Return to Stylus Studio EDIFACT home page.
Return to Stylus Studio EDIFACT D96A Code List page.

6311 -

Measurement application qualifier
UN/CEFACT Revision 1996A Code List

Repr:an..3
Desc:Specification of the application of the physical measurement used.
This table also occurs in the following versions of this standard:
D00A, D00B, D01A, D01B, D01C, D02A, D02B, D03A, D03B, D04A, D04B, D93A, D94A, D94B, D95A, D95B, D96A, D96B, D97A, D97B, D98A, D98B, D99A, D99B

AAALine item measurement
Line item measurement specified by the Food and Drug Administration.
AAB
Retail container dimension
Single physical dimension of a retail container.
AAC
Retail container size
Size of a retail container in terms of volume.
AAD
Other US Government agency application
Description to be provided.
AAE
Measurement
[6314] Value of the measured unit.
AAF
Customs line item measurement
The measurement of a consignment or part for customs purpose.
AAG
Percentage of alcohol (by volume)
The measurement of the percentage of alcohol by volume.
AAH
Dimensions total weight
Description to be provided.
AAI
Item weight
Weight at line item level.
AAJ
Visa quantity
Measurement reportable for visaed merchandise.
AAK
Licence (quantity deducted)
Quantity to be written off from the total license amount.
AAL
Cargo loaded
Total tonnage of cargo loaded onto the conveyance.
AAM
Cargo discharged
Total tonnage of cargo unloaded from the conveyance.
AAN
Weight of conveyance
Tonnage of conveyance.
AAO
Conveyance summer dead weight
Registered summer dead weight total tonnage of the vessel.
AAP
Containerized cargo on vessel's weight
Total weight of containerized cargo on vessel.
AAQ
Non-containerized cargo on vessel's weight
Total weight of non-containerized cargo on vessel.
AAR
1st specified tariff quantity
Primary reportable quantity associated with a tariff number.
AAS
2nd specified tariff quantity
Secondary reportable quantity associated with a tariff number.
AAT
3rd specified tariff quantity
Third reportable quantity associated with a tariff number.
AAUPackage
Commodity/product shipped or sold in discrete individual containers which may be accumulated in a larger package.
AAVPerson
Physical measurement of a person.
AAW
Accuracy
Accuracy of the measurements being sent.
AAXConsignment measurement
Measurement related to a consignment; to be specified by the measurement code dimension value.
AAYPackage measurement
Measurements of package.
AAZHandling unit measurement
Measurements of handling unit.
ABAUnit of measure used for ordered quantities
The unit of measure in which ordered quantities are expressed.
ABB
Colour
The colour of an object.
ABC
Size
Dimensions or magnitude of an object.
ABD
Length
The greater of the two or three dimensions of an object.
ABE
Height
The distance from the bottom to the top.
ABF
Width
The distance from side to side.
ABG
Diameter
The length of a line segment passing through the center of a circle, sphere, etc. from one side to the other.
ABH
Depth
The distance from the top downward.
ABI
Ventilation
The number of air exchanges per hour.
ABJ
Original unit of issue
A code identifying the original unit of issue.
ABK
External dimension
The outer measurement of the referenced item or package.
ABL
Internal dimension
The inner measurement of the referenced item or package.
ABM
Test piece dimensions
The size of the test piece that was tested.
ABN
Average reading
Average reading of the test being reported on.
ASW
Weight ascertained
[4240] Endorsement of the true weight (mass) as ascertained or verified by the railway (CIM 81).
CH
Chemistry
The given measurement value identifies the amount or percentage of a specific chemical within a substance.
CHW
Chargeable weight
The weight on which charges are based.
CN
Core notch dimensions
Self explanatory.
CS
Core size
Self explanatory.
CTCounts
Self explanatory.
DENDensity
Code to indicate the mass of a commodity per unit of volume.
DR
Decision result value
Description to be provided.
DT
Dimensional tolerance
Possible range of values for a specified measurement dimension of a product, material or package.
DV
Discrete measurement value
The measurement specified is separate and distinct from other measurements.
DX
Dimension used in price extension
Description to be provided.
EGW
Estimated gross weight
Estimated weight (mass) of goods, including packing and excluding carrier's.
EN
Environmental conditions
The data values to be reported reflect the environmental conditions surrounding a situation including but not limited to test environments.
EVO
Estimated volume
Estimated size or measure of anything in three dimensions.
FO
Footage
Description to be provided.
IV
Interpolated value
Description to be provided.
LAO
Vessel overall length
Total overall length of the vessel.
LC
Limited weight/size coils
Description to be provided.
LGLLength limitations
Indicates that value/range information is understood as length limitation.
LL
Lift limitation
A measurement indicating lift capacity limitations.
LMT
Loading meters
The length in a vehicle, whereby the complete width and height over that length is needed for the goods.
NAX
Number of axles
Number of axles of movable equipment or means of transport on wheels.
PAL
Payload
The revenue-producing load carried by a means of transport.
PC
Parting cut (sawcut)
Description to be provided.
PD
Physical dimensions (product ordered)
Specified measurement dimensions refer to physical dimensions of a product, material or package.
PL
Package limitations
A measurement indicating limitations associated with the package.
PLL
Platform limitation
A measurement indicating limitations in relation to a platform.
RL
Receiving facility limitations
Specified measurement dimensions are provided as a result of limitations or restrictions related to the physical dimensions of a product, material or package at the reception point.
RN
Length limitations
Indicates that value/range information within measurement information is understood as length limitation. Use code value LGL.
SE
Property specification
Indicates that the data to follow are target specifications.
SH
Shipping tolerance
Tolerances related to shipping.
SM
Shade
Description to be provided.
SO
Storage limitation
A measurement indicating limitation in relation to storage.
SPG
Specific gravity
Self explanatory.
SR
Surface roughness
Self explanatory.
ST
Surface treatment
Self explanatory.
SU
Surface
Self explanatory.
SV
Specification value
A measurable item characteristic specified by the buyer, seller or third party.
TE
Temperature
Self explanatory.
TL
Transportation equipment limitations
A measurement indicating limitations in relation to transportation equipment.
TR
Test result
Indicates that the data to follow is the test result measurements.
TX
Time used in price extension
Description to be provided.
VO
Observed value
The reported test result which includes measurement variability.
VOLVolume
Size or measure of anything in three dimensions.
VT
True value
The reported test result with the measurement variability removed.
WTWeights
Self explanatory.
WX
Weight used in price extension
Description to be provided.

Change indicators
plus sign An addition.
asterisk Addition/substraction/change to a code entry for a particular data element.
hash or pound sign Changes to names.
vertical bar Changes to text for descriptions, notes and functions.
minus sign A deletion.
letter X Marked for deletion.

Return to Stylus Studio EDIFACT D96A Code List page.
EDI to XML Mapping for EDIFACT/X12 Convert EDIFACT/X12 Schemas to XML Schema Legacy Data Conversion Tools Access Relational Data as XML Visual XSLT and XQuery Mapping Tools EDIFACT to XML
Return to Stylus Studio EDIFACT home page.

Return to Stylus Studio home page.
Site Map | Privacy Policy | Terms of Use | Trademarks
Stylus Scoop XML Newsletter:
W3C Member
Stylus Studio® and DataDirect XQuery ™are from DataDirect Technologies, is a registered trademark of Progress Software Corporation, in the U.S. and other countries. © 2004-2016 All Rights Reserved.