Frames | No Frames

Return to Stylus Studio EDIFACT home page.
Return to Stylus Studio EDIFACT D93A Messages page.
UN/EDIFACT
DRAFT RECOMMENDATION

MULTIPLE PAYMENT ORDER MESSAGE

This message is available for formal trial in the present version for a period of at least twelve months from the date of approval by the UN/ECE/TRADE/WP.4.

Organisations are invited to trial this message and are requested to notify their Rapporteur Team Secretariat of their intention. Comments on the results from the trial should also be forwarded to the Secretariat as soon as they are available. Based on the results of the trials, a UNSM will be issued.

It should be noted that this material is contained in a Trial Directory; however, it may differ from that in the UN Directories (UNTDID) having the same identfying tags. Any differences will be reconciled prior to the message becoming a UNSM.


Message Type:PAYMUL
Version:D
Release:93A
Contr. Agency:UN
Status:1
Date:92-07
SOURCE:WESTERN EUROPEAN EDIFACT BOARD - MD4

CONTENTS
MULTIPLE PAYMENT ORDER MESSAGE MESSAGE
  1. Introduction
  2. Scope
    1. Functional Definition
    2. Field of Application
    3. Principles
  3. References
  4. Message Definition
  5. Message Definition
    1. Data Segment Clarification
    2. Message structure
      1. Branching Diagram
      2. Segment Table
    3. Data Segment Index (Alphabetic Sequence)

For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.5, UN/ECE UNSM General Introduction.


This message also occurs in the following versions of this standard:
D93A, D94A, D94B, D95A, D95B, D96A, D96B, D97A, D97B, D98A, D98B, D99A, D99B, D00A, D00B, D01A, D01B, D01C, D02A, D02B, D03A, D03B, D04A, D04B

0. Introduction

This specification provides the definition of the Multiple Payment order Message (PAYMUL) to be used in Electronic Data Interchange (EDI) between partners involved in administration, commerce and transport.


1. Scope


1.1. Functional Definition

A Multiple Payment order is sent by the Ordering Customer (or Payer or Agent on behalf of the Ordering Customer) to the Ordered Bank, to instruct the Ordered Bank to debit an account it services for the Ordering Customer, and to arrange for the payment of specified amounts to several Beneficiaries (or Payees) in settlement of the referenced business transaction(s).

Throughout this document, the term 'Ordering Customer' refers to either an Ordering Customer, or a Payer or Agent acting (sending) on behalf of the Ordering Customer; likewise the term 'Beneficiary' refers to either a Beneficiary, or a Payee or Agent acting on behalf of the Beneficiary.


1.2. Field of Application

This message may be applied for both national and international settlements. It is based on universal practice and is not dependent on the type of business or industry.


1.3. Principles

  • A Multiple Payment Order may cover the financial settlement
  • of one or more commercial trade transactions such as invoices credit notes, debit notes etc. It is not intended for use in securities trading.

  • Charges may be borne on account(s) different of the
  • account(s) held by the Ordering Customer.

  • Several debit accounts, execution dates and currencies may
  • be specified.

  • The Ordered Bank may need a confirmation/authorization
  • (e.g. AUTHOR message) to be allowed to process the Multiple Payment Order message.

  • The only way to modify a Multiple Payment Order message is
  • to cancel the whole message or part thereof (e.g. by the use of the FINCAN message). In that respect, one to many order(s) could be cancelled within the message, avoiding to be obliged to cancel the whole message.


2. References

See UNTDID, Part 4 Section 2.5 UN/ECE UNSM - General Introduction, Section 1.


3. Terms and Definitions

See UNTDID, Part 4, Section 2.5 UN/ECE UNSM - General Introduction, Section 2.


4. Message Definition


4.1. Data Segment Clarification

This section should be read in conjunction with the Branching Diagram and the Segment Table which indicate mandatory, conditional and repeating requirements.

0010 UNH, Message header

A service segment starting and uniquely identifying a message.

The message type identifier for the UN Multiple Payment Order is PAYMUL.

Note: PAYMUL message conforming to this issue, 92.1 of the UNTDID, must contain the following data in UNH, composite S009:

Data element0065PAYMUL
0052D
005493A
0051UN

0020 BGM, Beginning of message

A segment by means of which the sender must uniquely identify the PAYMUL message using its type and number and when necessary its function.

Note: The identification will be passed back to the ordering customer for reconciliation purposes, if a reference is not quoted in the B- level.

0030 DTM, Date/time/period

A segment specifying the date and if required the time when the message is created.

0040 BUS, Business function

A segment providing information to the ordered bank to route the message, or for tariffing or for the provision of some statistical information.

0050 FII, Financial institution information

A segment identifying the financial institution which holds the account(s).

0060 Segment Group 1: RFF-DTM

A group of segments identifying any previously sent message.

0070 RFF, Reference

A segment specifying the reference number of another message.

0080 DTM, Date/time/period

A segment identifying the creation date of the referenced message.

0090 Segment Group 2: NAD-CTA-COM

A group of segments identifying the ordering party, which is valid for all payment orders.

0100 NAD, Name and address

Name and address for the ordering customer

0110 CTA, Contact information

A segment identifying a portion or a department for the party specified in the leading NAD segment to whom communication should be directed.

0120 COM, Communication contact

A segment identifying communication type(s) and number(s) of person(s) or department(s) specified in the associated CTA segment.

0130 Segment Group 3: LIN-DTM-RFF-BUS-FCA-SG4-SG5-SG6-SG7-SG8-SG9-SG10

This segment group contains information regarding the debit side of this transaction and details which are pertinent to all payments specified in the message. Certain payment details may be provided either in segment group 3 or in segment group 10, but not in both.

0140 LIN, Line item

A segment identifying the line item by a current line number.

0150 DTM, Date/time/period

A segment identifying the date, at which an order has been requested to be executed or acted upon.

0160 RFF, Reference

A segment specifying the reference of the single debit amount in the PAYMUL.

Note: The identification will be passed back to the Ordering Customer for reconciliation purposes.

0170 BUS, Business function

A segment identifying certain characteristics of the payment orders stored on level C, such as business function.

0180 FCA, Financial charges allocation

A segment specifying the method for allocation of charges and allowances (e.g. charges to be borne by the ordering customer), and identifying the ordering customer's account to which such charges or allowances should be directed where it is different from the principal account. This constitutes a default specification and may be overridden at detail level.

0190 Segment Group 4: MOA-CUX-DTM-RFF

A group of segments containing the currency of the single amounts in level C, currency to be transferred, plus the total of all single amounts of level C.

0200 MOA, Monetary amount

A segment specifying the total amount and the currency to be transferred.

0210 CUX, Currencies

A segment specifying the source currency and the destination currency of the transaction, when they are different. The rate of exchange is solely used when previously agreed between the ordering customer and the ordered bank.

0220 DTM, Date/time/period

A segment identifying the effective date and/or time the rate of exchange was fixed. The other occurrence identifies the reference date.

0230 RFF, Reference

A segment identifying the deal between ordered bank and ordering customer.

0240 Segment Group 5: FII-CTA-COM

A group of segments containing the account servicing bank including the account to be debited. If the ordering party is not quoted separately in the NAD-segment on level-B or level-A, then this group also contains the information of the ordering party.

0250 FII, Financial institution information

A segment identifying the financial institution and relevant account number with the currency.

0260 CTA, Contact information

A segment identifying a person or a department for the financial institution specified in the FII segment and to whom communication should be directed.

0270 COM, Communication contact

A segment providing a communication number for the party identified in the FII segment.

0280 Segment Group 6: NAD-CTA-COM

A group of segments identifying the ordering party (mutually exclusive with NAD-segment on level-A for the ordering party (Ordering customer and payer). Furthermore, one contact party can also be quoted in this group.

0290 NAD, Name and address

A segment identifying the name and address of the non-financial institutions associated with the PAYMUL.

0300 CTA, Contact information

A segment identifying a person or a department for the party specified in the NAD segment and to whom communication should be directed.

0310 COM, Communication contact

A segment providing a communication number for the party identified in the NAD segment and optionally for the contact identified in the associated CTA segment.

0320 Segment Group 7: INP-DTM-FTX

A group of segments containing instructions from the ordering customer relating to parties identified in the NAD and FII segments. It specifies action to be taken by the identified parties and the date (and optionally time) by which such action needs to be taken.

0330 INP, Parties to instruction

A segment identifying the party originating the instruction and the parties to be contacted. It specifies where appropriate the instruction in coded form.

0340 DTM, Date/time/period

A segment specifying the earliest and the latest dates and times by which the instruction specified in the INP and/or FTX segment(s) needs to be carried out.

0350 FTX, Free text

A segment providing free text instruction relating to the associated INP segment.

0360 Segment Group 8: GIS-NAD-FTX

A group - mutually exclusive with level C - of segments providing information for subsequent use by regulatory authorities requiring statistical and other types of data. It also identifies the regulatory authority for which the information is intended followed by the information itself.

0370 GIS, General indicator

A segment identifying what processing should be completed by regulatory authorities.

0380 NAD, Name and address

A segment identifying the recipient of the associated informative text.

0390 FTX, Free text

A segment giving information in coded or in clear form to provide information relevant to regulatory authorities requirements.

0400 Segment Group 9: PRC-FTX

A group of segments - mutually exclusive with level -C- containing the details of payment, which are determined for all payments on level C.

0410 PRC, Process identification

A segment identifying the kind of free text following this segment.

0420 FTX, Free text

A segment for information in coded or in clear form to provide information from the ordering customer to the beneficiary.

0430 Segment Group 10: SEQ-MOA-DTM-RFF-PAI-FCA-SG11-SG12-SG13-SG14-SG15

This segment group contains information regarding the Beneficiaries of the payments. Certain payment details may be provided either in segment group 10 or in segment group 3, but not in both.

0440 SEQ, Sequence details

A segment identifying the kind of item with a current number.

0450 MOA, Monetary amount

A segment giving the amount value of the payment. It is the amount to be transferred. The currency is quoted on level B.

0460 DTM, Date/time/period

A segment identifying dates and where necessary the time for value dates on the beneficiary's side.

0470 RFF, Reference

A segment identifying a transaction from the ordering customer to the beneficiary.

Note: This reference number will be printed in the statement line of the beneficiary's account being able to reconcile the credited amount with direct communication between the two parties.

0480 PAI, Payment instructions

A segment specifying the conditions, method and channel of payment for the payment order.

0490 FCA, Financial charges allocation

A segment specifying the method for allocation of charges and allowances and identifying the ordering customer's account to which such charges or allowances should be directed where it is different from the principal amount; quotation of the segment mutually exclusive with level-B.

0500 Segment Group 11: FII-CTA-COM

A group of segments containing the beneficiary's bank and the account and if necessary up to two intermediary banks.

0510 FII, Financial institution information

A segment identifying the financial institution and relevant account number with the currency.

0520 CTA, Contact information

A segment identifying a person or a department for the financial institution specified in the FII segment and to whom communication should be directed.

0530 COM, Communication contact

A segment providing a communication number for the party identified in the FII Segment and optionally for the intermediary banks.

0540 Segment Group 12: NAD-CTA-COM

A group of segments identifying the name and address of the beneficiary and one contact party.

0550 NAD, Name and address

A segment identifying the name and address of the non-financial institutions associated with the payment on the beneficiary's side.

0560 CTA, Contact information

A segment identifying a person or a department for the party specified in the NAD segment and to whom communication should be directed.

0570 COM, Communication contact

A segment providing a communication number for the party identified in the NAD segment and optionally for the contact identified in the associated CTA segment.

0580 Segment Group 13: INP-DTM-FTX

A group of segments containing instructions from the ordering customer relating to parties identified in the NAD and FII segments. It specifies action to be taken by the identified parties and the date (and optionally time) by which such action needs to be taken.

0590 INP, Parties to instruction

A segment identifying the party originating the instruction and the parties to be contacted. It specifies where appropriate the instruction in coded form.

0600 DTM, Date/time/period

A segment specifying the earliest and the latest dates and times by which the instruction specified in the INP and/or FTX segment(s) needs to be carried out.

0610 FTX, Free text

A segment providing free text instruction relating to the associated INP segment.

0620 Segment Group 14: GIS-NAD-FTX

A group - mutually exclusive with level B - of segments providing information for subsequent use by regulatory authorities requiring statistical and other types of data. It also identifies the regulatory authority for which the information is intended followed by the information itself.

0630 GIS, General indicator

A segment identifying what processing should be completed by regulatory authorities.

0640 NAD, Name and address

A segment identifying the recipient of the associated informative text.

0650 FTX, Free text

A segment giving information in coded or in clear form to provide information relevant to regulatory authorities' requirements.

0660 Segment Group 15: PRC-FTX-SG16

A group of segments containing the details of payment. The content of these segments is passed through the banking chain from the ordering customer to the beneficiary's account to be credited.

Note: This segment group can be mutually exclusive with level B. In addition the group contains two further mutually exclusive segments.

0670 PRC, Process identification

A segment identifying the kind of payment details.

0680 FTX, Free text

A segment providing free text instruction relating to the payment details.

0690 Segment Group 16: DOC-MOA-DTM-RFF-NAD-SG17-SG18-SG19

A group of segments providing details of all documents, e.g., invoices, statements, despatch advices, etc..., to which the Multiple Payment Order refers. It includes information on the monetary amounts for each document and on any adjustments (with an indication of the reason for adjustments) and discounts. For information purposes an indication of the tax element can be provided.

0700 DOC, Document/message details

A segment identifying the reference document against which payment is being made.

0710 MOA, Monetary amount

A segment giving the monetary amounts of each reference document (e.g., original amount, discount amount etc..). The amount due and the amount remitted are mandatory.

0720 DTM, Date/time/period

A segment specifying the date of the referenced document and indicating any other relevant dates applicable.

0730 RFF, Reference

A segment for the inclusion of any additional references related to the reference document.

0740 NAD, Name and address

A segment identifying a party name and address, either by coded identification or in a clear form.

0750 Segment Group 17: CUX-DTM

A group of segments specifying the currencies and the related dates/periods valid to the referenced document where different to the reference currency.

0760 CUX, Currencies

A segment identifying the currency and associated exchange rate of the referenced document where different to the remittance currency.

0770 DTM, Date/time/period

A segment specifying the date/time/period related to the rate of exchange.

0780 Segment Group 18: AJT-MOA-RFF

A group of segments indicating adjustment amounts and their referenced documents.

0790 AJT, Adjustment details

A segment indicating any adjustments to the amounts originally specified in the referenced document, and to which items such adjustments apply with the associated reason for adjustment.

0800 MOA, Monetary amount

A segment giving the monetary amounts of the adjustments of each reference document (e.g. original amounts, discount amount, etc.) The currency data elements should not be used.

0810 RFF, Reference

A segment for the inclusion of any additional references related to the reference documents.

0820 Segment Group 19: DLI-MOA-PIA-DTM-SG20-SG21

A group of segments which may be used when required to provide details of individual line items in the reference document.

0830 DLI, Document line identification

A segment identifying a specific line item within the referenced document.

0840 MOA, Monetary amount

A segment giving the monetary amounts for this line item.

0850 PIA, Additional product id

A segment specifying item identification codes where required.

0860 DTM, Date/time/period

A segment specifying the date/time/period related to the line item.

0870 Segment Group 20: CUX-DTM

A group of segments identifying the currency and the related dates/periods of the line item where different to the remittance and document currency.

0880 CUX, Currencies

A segment identifying the currency and associated exchange rate of the line item, where different to the reference and target currency.

0890 DTM, Date/time/period

A segment specifying the effective date and/or time the rate of exchange was fixed.

0900 Segment Group 21: AJT-MOA-RFF

A group of segments indicating adjustment amounts and their referenced documents for this line item.

0910 AJT, Adjustment details

A segment indicating any adjustments to the amounts originally specified for this line item and the reason for the adjustments.

0920 MOA, Monetary amount

A segment giving the monetary amounts of the adjustment for this line item.

0930 RFF, Reference

A segment for the inclusion of any additional references related to the reference document.

0940 CNT, Control total

A segment identifying the kind of control-checks for the payment orders contained in the PAYMUL and identifying the totals according to the coded form.

0950 Segment Group 22: AUT-DTM

A group of segments specifying the details of any authentication (validation) procedure applied to the PAYMUL message.

0960 AUT, Authentication result

A segment specifying details of any authentication (validation) procedures applied to the PAYMUL message.

0970 DTM, Date/time/period

A segment identifying the validation date/time.

0980 UNT, Message trailer

A service segment ending a message, giving the total number of segments in the message and the control reference number of the message.


4.2. Message Structure


4.2.1. Branching Diagram


4.2.2. Segment Table

├─UNH Message header ×1 (M)
├─BGM Beginning of message ×1 (M)
├─DTM Date/time/period ×1 (M)
├─BUS Business function ×1 (C)
├─FII Financial institution information ×1 (C)
├─Segment Group 1 ×1 (C)
├─RFF Reference ×1 (M)
└─DTM Date/time/period ×1 (C)
├─Segment Group 2 ×1 (C)
├─NAD Name and address ×1 (M)
├─CTA Contact information ×1 (C)
└─COM Communication contact ×5 (C)
├─Segment Group 3 ×9999 (M)
├─LIN Line item ×1 (M)
├─DTM Date/time/period ×1 (M)
├─RFF Reference ×1 (C)
├─BUS Business function ×1 (C)
├─FCA Financial charges allocation ×1 (C)
├─Segment Group 4 ×1 (M)
├─MOA Monetary amount ×1 (M)
├─CUX Currencies ×1 (C)
├─DTM Date/time/period ×2 (C)
└─RFF Reference ×1 (C)
├─Segment Group 5 ×1 (M)
├─FII Financial institution information ×1 (M)
├─CTA Contact information ×1 (C)
└─COM Communication contact ×5 (C)
├─Segment Group 6 ×3 (C)
├─NAD Name and address ×1 (M)
├─CTA Contact information ×1 (C)
└─COM Communication contact ×5 (C)
├─Segment Group 7 ×1 (C)
├─INP Parties to instruction ×1 (M)
├─DTM Date/time/period ×1 (C)
└─FTX Free text ×1 (C)
├─Segment Group 8 ×2 (C)
├─GIS General indicator ×1 (M)
├─NAD Name and address ×1 (M)
└─FTX Free text ×6 (M)
├─Segment Group 9 ×1 (C)
├─PRC Process identification ×1 (M)
└─FTX Free text ×1 (M)
└─Segment Group 10 ×9999 (M)
──├─SEQ Sequence details ×1 (M)
──├─MOA Monetary amount ×1 (M)
──├─DTM Date/time/period ×1 (C)
──├─RFF Reference ×1 (C)
──├─PAI Payment instructions ×1 (C)
──├─FCA Financial charges allocation ×1 (C)
──├─Segment Group 11 ×3 (C)
──├─FII Financial institution information ×1 (M)
──├─CTA Contact information ×1 (C)
──└─COM Communication contact ×5 (C)
──├─Segment Group 12 ×3 (C)
──├─NAD Name and address ×1 (M)
──├─CTA Contact information ×1 (C)
──└─COM Communication contact ×5 (C)
──├─Segment Group 13 ×3 (C)
──├─INP Parties to instruction ×1 (M)
──├─DTM Date/time/period ×2 (C)
──└─FTX Free text ×1 (C)
──├─Segment Group 14 ×2 (C)
──├─GIS General indicator ×1 (M)
──├─NAD Name and address ×1 (M)
──└─FTX Free text ×6 (M)
──└─Segment Group 15 ×1 (C)
────├─PRC Process identification ×1 (M)
────├─FTX Free text ×5 (C)
────└─Segment Group 16 ×9999 (C)
──────├─DOC Document/message details ×1 (M)
──────├─MOA Monetary amount ×5 (C)
──────├─DTM Date/time/period ×5 (C)
──────├─RFF Reference ×5 (C)
──────├─NAD Name and address ×2 (C)
──────├─Segment Group 17 ×5 (C)
──────├─CUX Currencies ×1 (M)
──────└─DTM Date/time/period ×1 (C)
──────├─Segment Group 18 ×100 (C)
──────├─AJT Adjustment details ×1 (M)
──────├─MOA Monetary amount ×1 (M)
──────└─RFF Reference ×1 (C)
──────└─Segment Group 19 ×1000 (C)
────────├─DLI Document line identification ×1 (M)
────────├─MOA Monetary amount ×5 (M)
────────├─PIA Additional product id ×5 (C)
────────├─DTM Date/time/period ×5 (C)
────────├─Segment Group 20 ×5 (C)
────────├─CUX Currencies ×1 (M)
────────└─DTM Date/time/period ×1 (C)
────────└─Segment Group 21 ×10 (C)
──────────├─AJT Adjustment details ×1 (M)
──────────├─MOA Monetary amount ×1 (M)
──────────└─RFF Reference ×1 (C)
├─CNT Control total ×5 (C)
├─Segment Group 22 ×1 (C)
├─AUT Authentication result ×1 (M)
└─DTM Date/time/period ×1 (C)
└─UNT Message trailer ×1 (M)

4.3. Data Segment Index (Alphabetic Sequence)

AJT Adjustment details
AUT Authentication result
BGM Beginning of message
BUS Business function
CNT Control total
COM Communication contact
CTA Contact information
CUX Currencies
DLI Document line identification
DOC Document/message details
DTM Date/time/period
FCA Financial charges allocation
FII Financial institution information
FTX Free text
GIS General indicator
INP Parties to instruction
LIN Line item
MOA Monetary amount
NAD Name and address
PAI Payment instructions
PIA Additional product id
PRC Process identification
RFF Reference
SEQ Sequence details
UNH Message header
UNT Message trailer

Return to Stylus Studio EDIFACT D93A Messages page.
EDI to XML Mapping for EDIFACT/X12 Convert EDIFACT/X12 Schemas to XML Schema Legacy Data Conversion Tools Access Relational Data as XML Visual XSLT and XQuery Mapping Tools EDIFACT to XML
Return to Stylus Studio EDIFACT home page.

Return to Stylus Studio home page.
Site Map | Privacy Policy | Terms of Use | Trademarks
Stylus Scoop XML Newsletter:
W3C Member
Stylus Studio® and DataDirect XQuery ™are from DataDirect Technologies, is a registered trademark of Progress Software Corporation, in the U.S. and other countries. © 2004-2016 All Rights Reserved.