<% Response.CharSet="utf-8" %> UN/EDIFACT D00A Message DGRECA - Dangerous goods recapitulation message Return to Stylus Studio EDIFACT D00A Messages page.
UN/EDIFACT
UNITED NATIONS STANDARD MESSAGE (UNSM)

Dangerous goods recapitulation message

Version:D
Release:00A
Contr. Agency:UN
Revision:1
Date:2000-01-27
SOURCE:Western European EDIFACT Board - MD2

CONTENTS
Dangerous goods recapitulation message
  1. INTRODUCTION
  2. SCOPE
    1. Functional definition
    2. Field of application
    3. Principles
  3. REFERENCES
  4. TERMS AND DEFINITIONS
    1. Standard terms and definitions
  5. MESSAGE DEFINITION
    1. Segment clarification
    2. Segment index (alphabetical sequence)
    3. Message structure
      1. Segment table

For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM General Introduction


This message also occurs in the following versions of this standard:
D97A, D97B, D98A, D98B, D99A, D99B, D00A, D00B, D01A, D01B, D01C, D02A, D02B, D03A, D03B, D04A, D04B

0. INTRODUCTION

This specification provides the definition of the Dangerous goods recapitulation message (DGRECA) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport.


1. SCOPE


1.1. Functional definition

A message to specify recapitulations pertaining to the dangerous goods on board of a means of transport, e.g. a vessel.


1.2. Field of application

The Dangerous goods recapitulation message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry.


1.3. Principles

The message has been designed to enable control of pollution caused by a means of transport, e.g. in the maritime and port environment.

Business area: control of pollution by a means of transport (e.g. maritime pollution)

Sending function: authority (e.g. port), centralised database of authorities

Receiving function: authority, search and rescue organisation.


2. REFERENCES

See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1.


3. TERMS AND DEFINITIONS


3.1. Standard terms and definitions

See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2.


4. MESSAGE DEFINITION


4.1. Segment clarification

This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements.

0010 UNH, Message header

A service segment starting and uniquely identifying a message. The message type code for the Dangerous goods recapitulation message is DGRECA.

Note: Dangerous goods recapitulation messages conforming to this document must contain the following data in segment UNH, composite S009:

Data element0065DGRECA
0052D
005400A
0051UN

0020 BGM, Beginning of message

A segment to indicate the beginning of a message and to transmit the identifying number.

0030 DTM, Date/time/period

A segment to provide the date and time of the message.

0040 Segment Group 1: RFF-DTM

A group of segments to specify a reference applying to the whole message.

0050 RFF, Reference

A segment to specify a reference, e.g. reference to previous message.

0060 DTM, Date/time/period

A segment to indicate a date and time related to the reference.

0070 Segment Group 2: TDT-DTM-LOC-RFF-MEA

A group of segments to indicate the details of the means of transport, with related locations, arrival dates and times, measurement, etc.

0080 TDT, Details of transport

A segment to identify the means of transport (e.g. by Lloyd's Register number of a vessel, or by the license plate number of a truck) and the type of the means of transport.

0090 DTM, Date/time/period

A segment to indicate the estimated date and time of arrival, and the date and time of departure.

0100 LOC, Place/location identification

A segment to indicate a location relating to the means of transport, such as: - place or port of departure - next place or port of call.

0110 RFF, Reference

A segment to specify a reference as an additional identification of the means of transport, e.g. radio call sign of a vessel.

0120 MEA, Measurements

A segment to specify a measurement of the means of transport, e.g. gross tonnage (of a vessel).

0130 Segment Group 3: NAD-SG4

A group of segments to identify a party which could give further information on the conveyance of the means of transport.

0140 NAD, Name and address

A segment to identify a party's name, address and function from which further information can be obtained (e.g. port authority, harbour master).

0150 Segment Group 4: CTA-COM

A group of segment to indicate a contact within the party.

0160 CTA, Contact information

A segment to identify a person or department within the party.

0170 COM, Communication contact

A segment to identify a communication number of the contact to whom communication should be directed.

0180 Segment Group 5: DGS-FTX-MEA-LOC-SGP

A group of segments to specify dangerous goods. The group is meant to be a recapitulation across all consignments on board of the means of transport, for dangerous goods that adhere to a certain combination of IMO code (i.e. International Maritime Organisation), IMO page number, UNDG number (i.e. United Nations Dangerous Goods number) and flashpoint.

0190 DGS, Dangerous goods

A segment to indicate the selection criteria for which a recapitulation is given, according to the appropriate regulation (e.g. IMO).

0200 FTX, Free text

A segment to specify the dangerous goods technical name related to the detailed dangerous goods classification as given in the DGS segment, and to provide additional dangerous goods information.

0210 MEA, Measurements

A segment to specify the gross weight of the recapitulation for the detailed dangerous goods classification as given in the DGS segment.

0220 LOC, Place/location identification

A segment to specify the location on the means of transport where the dangerous goods are stowed, e.g. stowage cell on a container vessel.

0230 SGP, Split goods placement

A segment to identify the equipment (e.g. container number) in which the dangerous goods are placed.

0240 UNT, Message trailer

A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message.


4.2. Segment index (alphabetical sequence)

BGM Beginning of message
COM Communication contact
CTA Contact information
DGS Dangerous goods
DTM Date/time/period
FTX Free text
LOC Place/location identification
MEA Measurements
NAD Name and address
RFF Reference
SGP Split goods placement
TDT Details of transport
UNH Message header
UNT Message trailer

4.3. Message structure


4.3.1. Segment table

├─UNH Message header ×1 (M)
├─BGM Beginning of message ×1 (M)
├─DTM Date/time/period ×9 (C)
├─Segment Group 1 ×9 (C)
├─RFF Reference ×1 (M)
└─DTM Date/time/period ×9 (C)
├─Segment Group 2 ×1 (M)
├─TDT Details of transport ×1 (M)
├─DTM Date/time/period ×2 (M)
├─LOC Place/location identification ×2 (M)
├─RFF Reference ×2 (C)
└─MEA Measurements ×1 (C)
├─Segment Group 3 ×1 (M)
├─NAD Name and address ×1 (M)
└─Segment Group 4 ×1 (C)
──├─CTA Contact information ×1 (M)
──└─COM Communication contact ×3 (C)
├─Segment Group 5 ×999 (M)
├─DGS Dangerous goods ×1 (M)
├─FTX Free text ×9 (M)
├─MEA Measurements ×1 (M)
├─LOC Place/location identification ×99 (C)
└─SGP Split goods placement ×99 (C)
└─UNT Message trailer ×1 (M)

Return to Stylus Studio EDIFACT D00A Messages page.