Frames | No Frames

Return to Stylus Studio EDIFACT home page.
Return to Stylus Studio EDIFACT 01A Code List page.

0085 -

Syntax error, coded
UN/EDIFACT Syntax Version 3 Revision 2001A Service Code List

Repr:an..3
Desc:A code indicating the syntax error detected.
This table also occurs in the following versions of this standard:
40000, 40001, 40002, 40003, 40004, 40005, 40006, 40007, 40100, 40101, 40102, 94A, 94B, 95B, 96A, 96B, 97A, 99A, 99B, 00A, 00B, 01A, 01B, 01C, 02A, 02B, 03A, 03B, D93A

2Syntax version or level not supported
Notification that the syntax version and/or level is not supported by the recipient.
7Interchange recipient not actual recipient
Notification that the Interchange recipient (S003) is different from the actual recipient.
12Invalid value
Notification that the value of a simple data element, composite data element or component data element does not conform to the relevant specifications for the value.
13Missing
Notification that a mandatory (or otherwise required) service or user segment, data element, composite data element or component data element is missing
14Value not supported in this position
Notification that the recipient does not support use of the specific value of an identified simple data element, composite data element or component data element in the position where it is used. The value may be valid according to the relevant specifications and may be supported if it is used in another position.
15Not supported in this position
Notification that the recipient does not support use of the segment type, simple data element type, composite data element type or component data element type in the specific in the identified position.
16Too many constituents
Notification that the identified segment contained to many data elements or that the identified composite data element contained too many component data elements.
17No agreement
No agreement exist that allows receipt of an interchange, functional group or message with the value of the identified simple data element, composite data element or component data element.
18Unspecified error
Notification that an error has been identified, but the nature of the error is not reported.
19Invalid decimal notation
Notification that the character indicated as decimal notation in UNA is invalid, or the decimal notation used in a data element is not consistent with the one indicated in UNA.
20Character invalid as service character
Notification that a character advised in UNA is invalid as service character.
21Invalid character(s)
Notification that one or more character(s) used in the interchange is not a valid character as defined by the syntax level indicated in UNB. The invalid character is part of the referenced-level, or followed immediately after the identified part of the interchange.
22Invalid service character(s)
Notification that the service character(s) used in the interchange is not a valid service character as advised in UNA or not one of the service characters in the syntax level indicated in UNB or defined in an interchange agreement. If the code is used in UCS or UCD, the invalid character followed immediately after the identified part of the interchange.
23Unknown Interchange sender
Notification that the Interchange sender (S002) is unknown.
24Too old
Notification that the received interchange or functional group is older than a limit specified in an IA or determined by the recipient.
25Test indicator not supported
Notification that a test processing could not be performed for the identified interchange, functional group or message.
26Duplicate detected
Notification that a possible duplication of a previously received interchange, functional group or message has been detected. The earlier transmission may have been rejected.
27Security function not supported
Notification that a security function related to the referenced-level or data element is not supported.
28References do not match
Notification that the control reference in UNB/UNG/UNH does not match the one in UNZ/UNE/UNT.
29Control count does not match number of instances received
Notification that the number of functional groups/ messages/segments does not match the number given in UNZ/UNE/UNT.
30Functional groups and messages mixed
Notification that individual messages and functional groups have been mixed at the same level in the interchange.
31More than one message type in group
Notification that different message types are contained in a functional group.
32Lower level empty
Notification that the interchange did not contain any messages or functional groups, or a functional group did not contain any messages.
33Invalid occurrence outside message or functional group
Notification that an invalid segment or data element occurred in the interchange, between messages or between functional groups. Rejection is reported at the level above.
34Nesting indicator not allowed
Notification that explicit nesting has been used in a message where it shall not be used.
35Too many segment repetitions
Notification that a segment was repeated too many times.
36Too many segment group repetitions
Notification that a segment group is repeated to many times.
37Invalid type of character(s)
Notification that one or more numeric characters were used in an alphabetic (component) data element or that one or more alphabetic characters were used in a numeric (component) data element.
38Missing digit in front of decimal sign
Notification that a decimal sign is not preceded by one or more digits.
39Data element too long
Notification that the length of the data element received exceeded the maximum length specified in the data element description.
40Data element too short
Notification that the length of the data element received is shorter than the minimum length specified in the data element description.
41Permanent communication network error
Notification that a permanent error was reported by the communication network used for transfer of the interchange. Re-transmission of an identical interchange with the same parameters at network level will not succeed.
42Temporary communication network error
Notification that a temporary error was reported by the communication network used for transfer of the interchange. Re-transmissions of an identical interchange may succeed.
43Unknown interchange recipient
Notification that the interchange recipient is not known by a network provider.

Change indicators
plus sign An addition.
asterisk Addition/substraction/change to a code entry for a particular data element.
hash or pound sign Changes to names.
vertical bar Changes to text for descriptions, notes and functions.
minus sign A deletion.
letter X Marked for deletion.

Return to Stylus Studio EDIFACT 01A Code List page.
EDI to XML Mapping for EDIFACT/X12 Convert EDIFACT/X12 Schemas to XML Schema Legacy Data Conversion Tools Access Relational Data as XML Visual XSLT and XQuery Mapping Tools EDIFACT to XML
Return to Stylus Studio EDIFACT home page.

Return to Stylus Studio home page.
Site Map | Privacy Policy | Terms of Use | Trademarks
Stylus Scoop XML Newsletter:
W3C Member
Stylus Studio® and DataDirect XQuery ™are from DataDirect Technologies, is a registered trademark of Progress Software Corporation, in the U.S. and other countries. © 2004-2016 All Rights Reserved.