Frames | No Frames

Return to Stylus Studio EDIFACT home page.
Return to Stylus Studio EDIFACT D02B Messages page.
UN/EDIFACT
UNITED NATIONS STANDARD MESSAGE (UNSM)

Customs conveyance report message

Version:D
Release:02B
Contr. Agency:UN
Revision:7
Date:2003-02-13
SOURCE:D5 Customs (SWG)

CONTENTS
Customs conveyance report message
  1. INTRODUCTION
  2. SCOPE
    1. Functional definition
    2. Field of application
    3. Principles
  3. REFERENCES
  4. TERMS AND DEFINITIONS
    1. Standard terms and definitions
  5. MESSAGE DEFINITION
    1. Segment clarification
    2. Segment index (alphabetical sequence by tag)
    3. Message structure
      1. Segment table

For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM General Introduction


This message also occurs in the following versions of this standard:
D93A, D94A, D94B, D95A, D95B, D96A, D96B, D97A, D97B, D98A, D98B, D99A, D99B, D00A, D00B, D01A, D01B, D01C, D02A, D02B, D03A, D03B, D04A, D04B

0. INTRODUCTION

This specification provides the definition of the Customs conveyance report message (CUSREP) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport.


1. SCOPE


1.1. Functional definition

This Customs Conveyance Report Message (CUSREP) permits the transfer of data from a carrier to a Customs administration for the purpose of meeting Customs reporting requirements in respect of the means of transport on which cargo is carried.


1.2. Field of application

The Customs conveyance report message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry.


1.3. Principles

It is envisaged that the Customs Conveyance Report Message may be initiated by the carrier to report details of the means of transport on which cargo is conveyed to a Customs administration. The message is transmitted upon arrival of the vessel, flight, etc., or where national legislation permits, prior to arrival. The data provides a means of establishing the basis of a cargo inventory report for the conveyance in question. Details of individual consignments carried on the conveyance will be subsequently transmitted to Customs using a CUSCAR message or a series of such messages. It also allows Customs to undertake selectivity processing in order to select high risk conveyances and shipments requiring examination.

The message embodies reporting requirements of all modes of transport. Each message covers the data requirements for one conveyance. The message may be used for reporting empty containers as well as numbers of passengers and crew.


2. REFERENCES

See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1.


3. TERMS AND DEFINITIONS


3.1. Standard terms and definitions

See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2.


4. MESSAGE DEFINITION


4.1. Segment clarification

This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements.

0010 UNH, Message header

A service segment starting and uniquely identifying a message. The message type code for the Customs conveyance report message is CUSREP.

Note: Customs conveyance report messages conforming to this document must contain the following data in segment UNH, composite S009:

Data element0065CUSREP
0052D
005402B
0051UN

0020 BGM, Beginning of message

A segment to identify the report/voyage number, type of message (e.g. amendment) and date/time of message of creation.

0030 DTM, Date/time/period

A segment to indicate date/time of conveyance report to Customs.

0040 QTY, Quantity

A segment to identify the number of passengers, number of crew, number of bills.

0050 POC, Purpose of conveyance call

A segment to indicate the purpose of call of the conveyance.

0060 FTX, Free text

A segment to provide observations, remarks and reason for change.

0070 MEA, Measurements

A segment to specify the conveyance's gross tonnage, net tonnage, summer dead weight tonnage, containerized/non-containerized tonnage and overall length.

0080 + GEI, Processing information

A segment to specify the import/export/transit indicator, prohibited/restricted goods indicator and unregistered spaces indicator.

0090 Segment Group 1: RFF-DTM

A group of segments to specify references and dates/times related to the conveyance.

0100 RFF, Reference

A segment to specify reference numbers associated with the conveyance.

0110 DTM, Date/time/period

A segment to specify dates/times associated with the conveyance's reference numbers.

0120 Segment Group 2: LOC-DTM

A group of segments to identify voyage itinerary.

0130 LOC, Place/location identification

A segment to specify the conveyance's voyage itinerary - ports of call/places.

0140 DTM, Date/time/period

A segment to specify dates/time associated with the itinerary.

0150 Segment Group 3: DOC-RFF-DTM-LOC

A group of segments to specify supporting documentary requirements and associated reference numbers, dates/times and locations.

0160 DOC, Document/message details

A segment to specify supporting documentary requirements, including Certificate of Registry, Safety of Life at Sea Certificate, Maritime Health Declaration, Ship's Stores Declaration (FAL 3), Crew's Effects Declaration (FAL 4), Crew's List Declaration (FAL 5), Passenger List (FAL 6).

0170 RFF, Reference

A segment to specify reference numbers associated with a supporting documentary requirement.

0180 DTM, Date/time/period

A segment to specify dates/times/periods associated with a supporting documentary requirement.

0190 LOC, Place/location identification

A segment to specify locations associated with a supporting documentary requirement.

0200 Segment Group 4: TAX-MOA-FII-LOC-RFF-DTM-GEI

A group of segments to indicate duty/tax/fee details and monetary amounts payable related to the conveyance.

0210 TAX, Duty/tax/fee details

A segment to specify relevant duty/tax/fee information.

0220 MOA, Monetary amount

A segment to specify monetary amount.

0230 FII, Financial institution information

A segment to identify an account and a related financial institution relevant to the payment of duty/tax/fee.

0240 LOC, Place/location identification

A segment to identify a place relevant to the payment of duty/tax/fee.

0250 RFF, Reference

A segment to identify a reference number relevant to the payment of duty/tax/fee.

0260 DTM, Date/time/period

A segment to identify dates, times or periods relevant to the payment of duty/tax/fee.

0270 + GEI, Processing information

A segment to transmit a processing indicator.

0280 Segment Group 5: NAD-SG6-SG7

A group of segments to identify names, addresses, contacts and references relating to the message.

0290 NAD, Name and address

A segment to specify declarant's name and address, ship's agent name and address, and master's name.

0300 Segment Group 6: CTA-COM

A group of segments specifying persons/departments and communication numbers associated with the party identified in NAD, group 5.

0310 CTA, Contact information

A segment to identify the person or department to whom communication should be directed.

0320 COM, Communication contact

A segment to identify communication numbers (i.e. telephone/ fax numbers) of departments or persons to whom communication should be directed.

0330 Segment Group 7: RFF-DTM

A group of segments specifying reference or transaction numbers and dates associated with the party identified in NAD, group 5.

0340 RFF, Reference

A segment to identify numbers associated with the named party or transaction.

0350 DTM, Date/time/period

A segment to specify dates/times associated with references.

0360 Segment Group 8: TDT-TPL-DTM-SG9

A group of segments to indicate details related to each leg of transport.

0370 TDT, Transport information

A segment to specify details of transport related to each leg, including name/number of vessel/vehicle/flight, nationality of ship, conveyance reference number, type of service identifier and carrier.

0380 TPL, Transport placement

A segment to specify placement of goods or equipment in relation to the transport used.

0390 DTM, Date/time/period

A segment to specify associated dates/times as required related to details of transport.

0400 Segment Group 9: LOC-DTM-QTY-NAD-MEA-POC-STS-FTX

A group of segments to specify locations related to each leg of transport, associated dates/times and quantity (tonnage) of cargo loaded/unloaded and associated details at each port.

0410 LOC, Place/location identification

A segment to specify port of initial arrival, place/station of last foreign port of call (last departure), place/port of loading, place/port of discharge, quay location/position of ship in port.

0420 DTM, Date/time/period

A segment to specify associated dates/times as required related to locations.

0430 QTY, Quantity

A segment to specify tonnage of cargo loaded/unloaded at each port.

0440 NAD, Name and address

A segment to specify names and addresses of agents and partner companies of joint operation at each place and/or port.

0450 MEA, Measurements

A segment to specify the forward draft and the after draft of the vessel at each port.

0460 POC, Purpose of conveyance call

A segment to specify purpose of call at each place and/or port.

0470 STS, Status

A segment to specify the status relating to the conveyance at each place/port (e.g. loaded).

0480 FTX, Free text

A segment to specify additional information (e.g. Customs clearance of personal effects and/or consigned articles) at each place and/or port.

0490 Segment Group 10: EQD-EQN

A group of segments to identify equipment details and number of equipment units.

0500 EQD, Equipment details

A segment to identify the size of containers and whether empty/loaded.

0510 EQN, Number of units

A segment to identify number of containers.

0520 Segment Group 11: AUT-DTM

A group of segments to specify results and date/time of the application of an authentication procedure.

0530 AUT, Authentication result

A segment to specify results of the application of an authentication procedure.

0540 DTM, Date/time/period

A segment to specify associated dates/times as required related to an authentication procedure.

0550 UNT, Message trailer

A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message.


4.2. Segment index (alphabetical sequence by tag)

AUT Authentication result
BGM Beginning of message
COM Communication contact
CTA Contact information
DOC Document/message details
DTM Date/time/period
EQD Equipment details
EQN Number of units
FII Financial institution information
FTX Free text
GEI Processing information
LOC Place/location identification
MEA Measurements
MOA Monetary amount
NAD Name and address
POC Purpose of conveyance call
QTY Quantity
RFF Reference
STS Status
TAX Duty/tax/fee details
TDT Transport information
TPL Transport placement
UNH Message header
UNT Message trailer

4.3. Message structure


4.3.1. Segment table

├─UNH Message header ×1 (M)
├─BGM Beginning of message ×1 (M)
├─DTM Date/time/period ×9 (C)
├─QTY Quantity ×9 (C)
├─POC Purpose of conveyance call ×99 (C)
├─FTX Free text ×9 (C)
├─MEA Measurements ×9 (C)
├─GEI Processing information ×9 (C)
├─Segment Group 1 ×99 (C)
├─RFF Reference ×1 (M)
└─DTM Date/time/period ×1 (C)
├─Segment Group 2 ×99 (C)
├─LOC Place/location identification ×1 (M)
└─DTM Date/time/period ×9 (C)
├─Segment Group 3 ×9 (C)
├─DOC Document/message details ×1 (M)
├─RFF Reference ×1 (C)
├─DTM Date/time/period ×1 (C)
└─LOC Place/location identification ×1 (C)
├─Segment Group 4 ×9 (C)
├─TAX Duty/tax/fee details ×1 (M)
├─MOA Monetary amount ×1 (C)
├─FII Financial institution information ×1 (C)
├─LOC Place/location identification ×1 (C)
├─RFF Reference ×1 (C)
├─DTM Date/time/period ×9 (C)
└─GEI Processing information ×1 (C)
├─Segment Group 5 ×9 (C)
├─NAD Name and address ×1 (M)
├─Segment Group 6 ×9 (C)
├─CTA Contact information ×1 (M)
└─COM Communication contact ×5 (C)
└─Segment Group 7 ×9 (C)
──├─RFF Reference ×1 (M)
──└─DTM Date/time/period ×1 (C)
├─Segment Group 8 ×99 (C)
├─TDT Transport information ×1 (M)
├─TPL Transport placement ×1 (C)
├─DTM Date/time/period ×1 (C)
└─Segment Group 9 ×99 (C)
──├─LOC Place/location identification ×1 (M)
──├─DTM Date/time/period ×9 (C)
──├─QTY Quantity ×9 (C)
──├─NAD Name and address ×99 (C)
──├─MEA Measurements ×9 (C)
──├─POC Purpose of conveyance call ×9 (C)
──├─STS Status ×9 (C)
──└─FTX Free text ×9 (C)
├─Segment Group 10 ×999 (C)
├─EQD Equipment details ×1 (M)
└─EQN Number of units ×1 (C)
├─Segment Group 11 ×1 (C)
├─AUT Authentication result ×1 (M)
└─DTM Date/time/period ×1 (C)
└─UNT Message trailer ×1 (M)

Change indicators
plus sign An addition.
asterisk Addition/substraction/change to a code entry for a particular data element.
hash or pound sign Changes to names.
vertical bar Changes to text for descriptions, notes and functions.
minus sign A deletion.
letter X Marked for deletion.

Return to Stylus Studio EDIFACT D02B Messages page.
EDI to XML Mapping for EDIFACT/X12 Convert EDIFACT/X12 Schemas to XML Schema Legacy Data Conversion Tools Access Relational Data as XML Visual XSLT and XQuery Mapping Tools EDIFACT to XML
Return to Stylus Studio EDIFACT home page.

Return to Stylus Studio home page.
Site Map | Privacy Policy | Terms of Use | Trademarks
Stylus Scoop XML Newsletter:
W3C Member
Stylus Studio® and DataDirect XQuery ™are from DataDirect Technologies, is a registered trademark of Progress Software Corporation, in the U.S. and other countries. © 2004-2016 All Rights Reserved.