Frames | No Frames

Return to Stylus Studio EDIFACT home page.
Return to Stylus Studio EDIFACT 94A Code List page.

0065 -

Message type identifier
UN/EDIFACT Syntax Version 3 Revision 1994A Service Code List

Repr:an..6
Desc:Code identifying a type of message and assigned by its controlling agency.
This table also occurs in the following versions of this standard:
40000, 40001, 40002, 40003, 40004, 40005, 40006, 40007, 40100, 40101, 40102, 94A, 94B, 95B, 96A, 96B, 97A, 99A, 99B, 00A, 00B, 01A, 01B, 01C, 02A, 02B, 03A, 03B, D93A

AUTHOR
Authorization message
Message sent by the Ordering Customer (or Payor or Agent on behalf of the Ordering Customer) or by a third party having authority on the Ordering Customer's payments to the Ordered Bank, to authorize the Ordered Bank to execute a given financial transaction. This financial transaction might relate to both: multiple messages like PAYMUL and DIRDEB and single instruction messages like PAYORD and PAYEXT. An Authorisation Message could also be sent from the Ordered Bank to the Ordering Customer or its Authorisation Authority to request authorisation for a given financial transaction.
BANSTABanking status message
Message sent by the receiver of a previously sent-message to report on the status of processing of this original message. It indicates, at the application level, the acceptance or rejection of the message or the ability for the receiver of the message to execute or not the instructions received.
BAPLIEBayplan/stowage plan occupied and empty locations message
Message to transmit information about equipment and goods on a means of transport, including their location on the means of transport. The message can be exchanged between (liner's) agents, tonnage centers, stevedores and ships masters/operators.
BAPLTEBayplan/stowage plan total numbers message
Message to transmit information about the total numbers of equipment and quantity of goods on a means of transport. The message can be exchanged between (liner's) agents, tonnage centers, stevedores and ships masters/operators.
COMDIS
Commercial dispute message
Message providing notice of commercial dispute against one or more invoices is usually raised by the buyer to notify the seller that something was found wrong with the goods delivered or the services rendered (goods damaged, delivery incomplete, delivery late, etc.). The dispute must be resolved before the related invoice can be settled. The message will be used to: - notify a dispute; -correspond about an existing dispute (structured information); - notify the settlement of a dispute. The message will serve at the same time as the dispute notice and as the dispute answer.
CONAPW
Advice on pending works message
Message to enable a contractor who intends to start works to advise public authorities and water, gas, telephone, electricity distributors of his intention and to request them to send back plans or information under any form concerning existing networks.
CONDPVDirect payment valuation message
Message of instruction sent by the contractor to the party responsible for payments, to pay the subcontractors for work completed.
CONESTEstablishment of contract message
Message to formally establish and issue the contractual Bill of Quantities (BoQ). This documentation becomes the contractual basis for all future work and payment for the project.
CONITTInvitation to tender message
At the pre-construction stage of a construction project, the Client will wish to appoint a contractor to execute the works. The first step in this appointment process is to issue an invitation to tender (ITT) to contractors this will require a commercial offer to be made by the contractor to the client.
CONPVAPayment valuation message
Message used between a contractor and the client's representative, during the process of approving the value and payment for work completed for a given period of time.
CONQVAQuantity valuation message
Message used by a contractor to submit progress details to a client or his representative. The message may be used also for subsets of the project where work has been contracted out to other parties. In these cases the exchange would be between the subcontractor and the party that subcontracted the work.
CONRPW
Response of pending works message
Message to reply to a CONAPW message and to enable service providers to respond to a contractor giving details of any services and networks in the location where construction work is to be undertaken.
CONTENTender message
Message sent by main contractor or subcontractor for the purposes of submitting a tender which is a commercial offer to execute the project work defined in the bill of quantities within the invitation to tender.
CONTRL
Syntax and service report message
Message syntactically acknowledging or rejecting, with error indication, a received interchange, functional group or message.
CONWQD
Work item quantity determination message
Message used between a contractor and the client's representative or other partners within the construction process, for justifying the work item quantities given in messages that describe the work items or their progress valuations.
CREADVCredit advice message
Message sent by the account servicing financial institution to the account owner to inform the account owner that its account has been or will be credited for a specified amount on the date indicated, in settlement of the referenced business transaction(s).
CREEXTExtended credit advice message
Message sent by the account servicing financial institution to the account owner to inform the account owner that its account has been or will be credited for a specified amount on the date indicated, in settlement of the referenced business transaction(s), and to provide to the payee full details of the transactions to which the extended credit advice relates.
CUSCARCustoms cargo report message
Message to permit the transfer of data from a carrier to a Customs administration for the purpose of meeting Customs cargo reporting requirements.
CUSDECCustoms declaration message
Message to permit the transfer of data from a declarant to a Customs administration for the purpose of meeting legislative and/or operational requirements in respect of the declaration of goods for import, export or transit.
CUSEXP
Customs express consignment declaration message
Message to permit the transfer of data from an express carrier to a Customs administration for the purpose of meeting Customs cargo reporting and/or clearance requirements.
CUSREPCustoms conveyance report message
Message to permit the transfer of data from a carrier to a Customs administration for the purpose of meeting Customs reporting requirements in respect of the means of transport on which the cargo is carried.
CUSRESCustoms response message
Message to permit the transfer of data from a Customs administration to the sender of Customs data. It may also be used by Customs to transmit electronic Customs clearance of goods.
DEBADVDebit advice message
Message sent by the account servicing financial institution to the account owner to inform the account owner that its account has been or will be debited for a specified amount on the date indicated, in settlement of the referenced business transaction(s).
DELFORDelivery schedule message
Message from buyer to supplier giving product requirements regarding details for short term delivery instructions and/or medium to long term product/service forecast for planning purposes according to conditions set out in a contract or order. The message can be used to authorize the commitment of labour and materials resources.
DELJITDelivery just-in-time message
Message providing the ability for a customer to convey precise delivery sequence and just-in-time schedule requirements to a supplier, and is intended to supplement the delivery schedule message (DELFOR).
DESADVDespatch advice message
Message specifying details for goods despatched or ready for despatch under agreed conditions.
DIRDEBDirect debit message
Message sent by the creditor to the creditor's bank instructing it to claim specified amounts from the debtor(s) and to credit these amounts to a single account it services for the creditor in settlement of the referenced transaction(s).
DOCADVDocumentary credit advice message
Message to indicate to the beneficiary the terms and conditions of a documentary credit that has been originated by the issuing bank and received by the advising bank (or an intermediary advising bank).
DOCAPPDocumentary credit application message
Message from a party requesting the issuance of a documentary credit to the party providing such service. In this message, the conditions under which the sender of the message requires the documentary credit to be issued are given.
DOCINFDocumentary credit issuance information message
Message to indicate the terms and conditions of an issued documentary credit from the issuing Bank to the applicant and/or the applicant's bank.
HANMOV
Cargo/goods handling and movement message
Message from a party to a warehouse/distribution centre identifying the handling services and where required the movement of specified goods, limited to warehouses within the jurisdiction of the distribution centre.
IFCSUMInternational forwarding and consolidation summary message
Message used for consolidation purposes from a party arranging forwarding and transport services to the party for which the transport of the consolidated cargo is destined. The message can be used to exchange information concerning the consolidated cargo between forwarders, carriers and agents enabling those parties to handle the consignments included in the consolidation. In addition it can be used for a collection of consignments originating from one shipper for forwarding and transport services.
IFTCCAForwarding and transport shipment charge calculation message
Message to request the calculation of the transport charges of a specific shipment and to answer to such a request.
IFTDGN
Dangerous goods notification message
Message from the party responsible to declare the dangerous goods (e.g. carrier's agent, freight forwarder) to the party acting on behalf of the local authority performing the checks on conformance with the legal requirements on the control of dangerous goods, normally Port Authority, conveying the information relating to one conveyance/voyage of a means of transport such as a vessel, train, truck or barge, on the dangerous goods being loaded, unloaded, and/or in transit.
IFTMANArrival notice message
Message from the party providing forwarding and/or transport services to the party such as has been indicated in the contract, giving notice and details of the arrival of the consignment.
IFTMBCBooking confirmation message
Message from the party providing forwarding and/or transport services to the party booking those services giving the confirmation information to the booking of the consignment concerned. A confirmation might read that the booking of a consignment is accepted, pending, conditionally accepted or rejected. The conditions under which requested services take place may be given in this message.
IFTMBFFirm booking message
Message from a party definitely booking forwarding and/or transport services for a consignment to the party providing those services. The message will contain the conditions under which the sender of the messages requires the services to take place.
IFTMBPProvisional booking message
Message from a party requesting space and/or giving brief details of a planned consignment for forwarding and/or transport services to the party providing those services. In this message, the conditions under which the planned transport should take place can be given.
IFTMCSInstruction contract status message
Message from the party providing the transport/forwarding services to the party that issued the instructions for those services stating the actual details, terms and conditions (charges when applicable) of the service and of the consignment involved. In addition it can be used for the exchange of contract information between carriers mutually.
IFTMINInstruction message
Message from the party issuing an instruction regarding forwarding/transport services for a consignment under conditions agreed, to the party arranging the forwarding and/or transport services.
IFTRINForwarding and transport rate information message
Message to request transport rate information and to answer to such a message.
IFTSAIForwarding and transport schedule and availability information message
Message to request transport schedule or availability information and to answer such a request.
IFTSTAInternational multimodal status report message
Message to report the transport status and/or a change in the transport status (i.e. event) between agreed parties.
IFTSTQ
International multimodal status request message
Message to request an international multimodal status report message (IFTSTA) in order to provide details relating to transport status and/or a change in the transport status between agreed parties.
INSPRE
Insurance premium message
Message used by communicating parties to notify the recipient about premiums due from a client. All information needed to produce a detailed request for payment can be sent.
INVOICInvoice message
Message claiming payment for goods or services supplied under conditions agreed between the seller and the buyer. The UNSM invoice message, with correct data qualification, serves also as the specification for debit note and credit note messages.
INVRPTInventory report message
Message specifying information relating to held inventories. The inventory report message is intended to be used in either direction between trading partners.
MOVINS
Stowage instruction message
Message containing details of one means of transport vehicle, giving instructions regarding the loading, discharging and restowage of equipment and/or cargoes and the location on the means of transport where the operation must take place.
ORDCHGPurchase order change message
Message from the buyer to the seller, specifying details of the buyer's request to change a purchase order.
ORDERSPurchase order message
Message specifying details for goods or services ordered under conditions agreed between the seller and the buyer.
ORDRSPPurchase order response message
Message from the seller to the buyer, responding to a purchase order message or a purchase order change request message.
PARTINParty information message
Message to enable the transmission of basic information regarding locations and the related operational, administrative, financial, manufacturing and trading data.
PAXLSTPassenger list message
Message to permit the transfer of passenger/crew data (where national privacy legislation permits and with agreement of all parties involved) from a customs, immigration or other designated authority in the country of departure to the appropriate authorities in the country of arrival of the means of transport.
PAYDUCPayroll deductions advice message
Message sent by a party to a service providing organisation, to detail payments by payroll deductions, on behalf of employees, made to the service providing organisation.
PAYEXTExtended payment order message
Message sent by the ordering customer (or payor or agent on behalf of the ordering customer) to the ordered bank, to instruct the ordered bank to debit an account it services for the ordering customer, and to arrange for the payment of a specified amount to the beneficiary (or payee or agent in favour of beneficiary) in settlement of the referenced business transaction(s), and to provide to the payee full details of the transactions to which the extended payment order relates.
PAYMULMultiple payment order message
Message sent by the ordering customer (or payor or agent on behalf of the ordering customer) to the ordered bank, to instruct the ordered bank to debit an account it services for the ordering customer, and to arrange for the payment of specified amounts to several beneficiaries (or payees) in settlement of the referenced business transaction(s).
PAYORDPayment order message
Message sent by the ordering customer (or payor or agent on behalf of the ordering customer) to the ordered bank, to instruct the ordered bank to debit an account it services for the ordering customer, and to arrange for the payment of a specified amount to the beneficiary (or payee or agent in favour of beneficiary) in settlement of the referenced business transaction(s).
PRICATPrice/sales catalogue message
Message to enable the transmission of information regarding pricing and catalogue details for goods and services offered by a seller to a buyer.
PRODEX
Product exchange reconciliation message
Message used as a communication between two trading partners with agreements for the loan of products to each other, to provide information about movements of products from and to various locations on particular dates.
PRPAID
Insurance premium payment message
Message used by communicating parties to notify the recipient about premiums to be collected, paid, not paid or partly paid, either individually or in series via bordereaux or statements.
QALITYQuality data message
Message to enable the transmission of the results of tests performed to satisfy a specified product or process requirement. The content includes, but it is not limited to, test data and measurements, statistical information, and the testing methods employed.
QUOTESQuote message
Message which provides potential sellers with the ability to provide price, delivery schedule, and other conditions for potential sales of goods or services.
REMADVRemittance advice message
Message which provides a detailed accounting relative to a payment, or other form of financial settlement, on a specified date for the provision of goods and/or services as detailed in the advice.
REQOTERequest for quote message
Message which provides potential buyers with the ability to solicit price, delivery schedule, and other conditions from potential sellers of goods or services.
SANCRT
Sanitary/phytosanitary certificate message
Message to permit an inspection authority to attest to the status (health, hygiene, freedom from disease or insect pests) of animal, plant or fish product, and provides basic details about the means of conveyance of that product.
SLSRPTSales data report message
Message to enable the transmission of sales data related to products or services, such as corresponding location, period, product identification, pricing, monetary amount, quantity, market sector information, sales parties. It enables the recipient to process the information automatically and use it for production, planning, marketing, statistical purposes, etc.
STATACStatement of account message
Message from a seller or his agent to a buyer or his agent, providing information about the status of the account at a specific point in time. It is used as an aid to reconciliation. At the same time it may be a reminder of payment due.
SUPCOTSuperannuation contributions advice message
Message sent by a party to an organisation administering a superannuation scheme, to detail contribution payments made for members of the superannuation scheme.
SUPMANSuperannuation maintenance message
Message sent by a party to an organisation administering a superannuation scheme, to specify membership maintenance information about superannuation scheme members.

Change indicators
plus sign An addition.
asterisk Addition/substraction/change to a code entry for a particular data element.
hash or pound sign Changes to names.
vertical bar Changes to text for descriptions, notes and functions.
minus sign A deletion.
letter X Marked for deletion.

Return to Stylus Studio EDIFACT 94A Code List page.
EDI to XML Mapping for EDIFACT/X12 Convert EDIFACT/X12 Schemas to XML Schema Legacy Data Conversion Tools Access Relational Data as XML Visual XSLT and XQuery Mapping Tools EDIFACT to XML
Return to Stylus Studio EDIFACT home page.

Return to Stylus Studio home page.
Site Map | Privacy Policy | Terms of Use | Trademarks
Stylus Scoop XML Newsletter:
W3C Member
Stylus Studio® and DataDirect XQuery ™are from DataDirect Technologies, is a registered trademark of Progress Software Corporation, in the U.S. and other countries. © 2004-2016 All Rights Reserved.