|
|
 next
|
  Subject: How to remove specific text entries from element content?
Author: dave garcia
Date: 26 Dec 2007 07:55 AM
Originally Posted: 26 Dec 2007 07:54 AM
|
Hi Alberto,
I tried this solution and technically it works fine, thank you! the problem I am running into is that when I try to implement this functionality into an existing stylesheet I have, the performance is very slow. I should have expressed my requirements better I apologize, I will try to do that below.
What would work better for me is instead of passing in single value to remove as shown below:
<xsl:with-param name="to_remove" select="'V1S3'"/>
is to pass in ALL values to be removed in a list. What further complicates this however is that the values to be removed, live in an existing list of values where only SOME of them are candidates to be removed. Currently I attempt to execute all this as follows:
<xsl:template match="/">
<xsl:for-each select="Export/*/Record[contains(@Type,'notation')][Property[@Name='notationText' and contains(text(),'MSG:')]]">
<xsl:variable name="notationID" select="@Identifier"/>
<xsl:call-template name="remove_if">
<xsl:with-param name="to_remove" select="$notationID"/>
<xsl:with-param name="properties" select="/Export/*/Record[@Type='ContainerView']/Property[@Name='ObjList']"/>
<xsl:with-param name="list" select="/Export/*/Record[@Type='ContainerView']/Property[@Name='ObjList']"/>
</xsl:call-template>
</xsl:for-each>
</xsl:template>
For a 4MB XML document this takes about 10 minutes to run and it does not seem to remove the items as I had hoped. I am guessing the performance problem is becuase on each recursive call to "remove_if" it has to pass the entire document in on paramters 2 and 3; in addition to walking through the same document in the for-loop. My thought was instead of using a for-loop, pass in all the values for to_remove at once in a list and get rid of the for-loop.
The problem I see with that, since only SOME of the values qualify for removal (as indicated in the condition in the for-loop), I would first have to create a node-set() which would be hard becuase the the number of items to remove would change each time (or are dynamic). Maybe I could create a variable some how with members in it that contains the items to remove with global scope then use the document() function to get at the values somehow? Remember I have to do all this in XSLT V1.0, I realize in V2.0 this would probably be a lot easier but don't have much choice in this matter.
Thanks In Advance,
Dave
|
 top
|
Subject: How to remove specific text entries from element content?
Author: dave garcia
Date: 07 Jan 2008 08:19 AM
Originally Posted: 07 Jan 2008 08:10 AM
|
Alberto, thanks again for the template you originally provided me, by expanding on it below is the final solution that now processes multiple string values which can be removed from a series of strings. I am hoping at some point I can move to XSLT V2.0 so I can harness the power of that version as my understanding is that this would have been much easier to do in 2.0, for now I have to stay on 1.0 with the rest of my team. Thanks again.
Ciao,
David
Sample Input:
<?xml version="1.0" encoding="UTF-8"?>
<Export>
<foo>
<Record Type="ContainerView">
<Property Name="ObjList">V1S1|V1S2|V1S3|V1A1|V1A2|V1A3|V1A4|V1A5</Property>
<Property Name="XPos">400|600|800|10|310|510|520|710</Property>
<Property Name="YPos">80|30|70|10|50|90|60|20</Property>
</Record>
</foo>
</Export>
Final Solution/Stylesheet:
<?xml version="1.0" encoding="utf-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output indent="yes" method="xml"/>
<xsl:variable name="remove_multi">
<xsl:for-each select="Export/*/Record[contains(@Type,'notation')][Property[@Name='notationText' and (contains(text(),'MSG:') or contains(text(),'UNSUPPORTED'))]]">
<xsl:variable name="notationID" select="@Identifier"/>
<xsl:value-of select="$notationID"/>
<xsl:text>|</xsl:text>
</xsl:for-each>
</xsl:variable>
<xsl:template match="/">
<xsl:variable name="properties" select="/Export/*/Record[@Type='ContainerView']/Property[@Name='ObjList']"/>
<xsl:variable name="ObjList" select="/Export/*/Record[@Type='ContainerView']/Property[@Name='ObjList']"/>
<xsl:variable name="XPos" select="/Export/*/Record[@Type='ContainerView']/Property[@Name='XPos']"/>
<xsl:variable name="YPos" select="/Export/*/Record[@Type='ContainerView']/Property[@Name='YPos']"/>
<Property Name='ObjList'>
<xsl:choose>
<xsl:when test="string-length($remove_multi) > 0">
<xsl:call-template name="remove_multiple">
<xsl:with-param name="remlist" select="$remove_multi"/>
<xsl:with-param name="properties" select="$properties"/>
<xsl:with-param name="list" select="$ObjList"/>
</xsl:call-template>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$ObjList"/>
</xsl:otherwise>
</xsl:choose>
</Property>
<Property Name='XPos'>
<xsl:choose>
<xsl:when test="string-length($remove_multi) > 0">
<xsl:call-template name="remove_multiple">
<xsl:with-param name="remlist" select="$remove_multi"/>
<xsl:with-param name="properties" select="$properties"/>
<xsl:with-param name="list" select="$XPos"/>
</xsl:call-template>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$XPos"/>
</xsl:otherwise>
</xsl:choose>
</Property>
<Property Name='YPos'>
<xsl:choose>
<xsl:when test="string-length($remove_multi) > 0">
<xsl:call-template name="remove_multiple">
<xsl:with-param name="remlist" select="$remove_multi"/>
<xsl:with-param name="properties" select="$properties"/>
<xsl:with-param name="list" select="$YPos"/>
</xsl:call-template>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$YPos"/>
</xsl:otherwise>
</xsl:choose>
</Property>
</xsl:template>
<xsl:template name="remove_multiple">
<xsl:param name="remlist"/>
<xsl:param name="properties"/>
<xsl:param name="list"/>
<xsl:variable name="proplist" select="$properties"/>
<xsl:variable name="removed_this">
<xsl:choose>
<xsl:when test="contains($remlist, '|')">
<xsl:call-template name="remove_if">
<xsl:with-param name="to_remove" select="substring-before($remlist, '|')"/>
<xsl:with-param name="properties" select="$properties"/>
<xsl:with-param name="list" select="$list"/>
</xsl:call-template>
</xsl:when>
<xsl:otherwise>
<xsl:call-template name="remove_if">
<xsl:with-param name="to_remove" select="$remlist"/>
<xsl:with-param name="properties" select="$properties"/>
<xsl:with-param name="list" select="$list"/>
</xsl:call-template>
</xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:variable name="removed_props">
<xsl:choose>
<xsl:when test="contains($remlist, '|')">
<xsl:call-template name="remove_if">
<xsl:with-param name="to_remove" select="substring-before($remlist, '|')"/>
<xsl:with-param name="properties" select="$properties"/>
<xsl:with-param name="list" select="$proplist"/>
</xsl:call-template>
</xsl:when>
<xsl:otherwise>
<xsl:call-template name="remove_if">
<xsl:with-param name="to_remove" select="$remlist"/>
<xsl:with-param name="properties" select="$properties"/>
<xsl:with-param name="list" select="$proplist"/>
</xsl:call-template>
</xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:choose>
<xsl:when test="string-length(substring-after($remlist, '|')) > 0">
<xsl:call-template name="remove_multiple">
<xsl:with-param name="remlist" select="substring-after($remlist, '|')"/>
<xsl:with-param name="properties" select="$removed_props"/>
<xsl:with-param name="list" select="$removed_this"/>
</xsl:call-template>
</xsl:when>
<xsl:otherwise>
<xsl:variable name="ln" select="string-length($removed_this)"/>
<xsl:variable name= "removed_that" select="substring($removed_this,1,$ln - 1)"/>
<xsl:value-of select="$removed_that"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
<xsl:template name="remove_if">
<xsl:param name="to_remove"/>
<xsl:param name="properties"/>
<xsl:param name="list"/>
<xsl:if test="string-length($list) > 0">
<xsl:choose>
<xsl:when test="contains($list, '|')"><xsl:if test="substring-before($properties, '|') != $to_remove"><xsl:value-of select="substring-before($list, '|')"/>|</xsl:if>
</xsl:when>
<xsl:otherwise>
<xsl:if test="$properties != $to_remove"><xsl:value-of select="$list"/></xsl:if>
</xsl:otherwise>
</xsl:choose>
<xsl:call-template name="remove_if">
<xsl:with-param name="to_remove" select="$to_remove"/>
<xsl:with-param name="properties" select="substring-after($properties,'|')"/>
<xsl:with-param name="list" select="substring-after($list, '|')"/>
</xsl:call-template>
</xsl:if>
</xsl:template>
</xsl:stylesheet>
|
|
|
|
|
