Cart
|
[XSL-LIST Mailing List Archive Home] [By Thread] [By Date] [Recent Entries] [Reply To This Message] RE: Formatted output
 > But there is another hitch, I cannot give commas to the traps. Each BehaviourInfo has only one Trap/Name, so when you do <xsl:for-each select="Trap/Name"> you are only processing one name, and it is always the last. You need to insert the comma where you are processing the BehaviorInfo elements, i.e. in the <xsl:for-each select="//Behaviour/BehaviourInfo"> Michael Kay Software AG home: Michael.H.Kay@xxxxxxxxxxxx work: Michael.Kay@xxxxxxxxxxxxxx > -----Original Message----- > From: owner-xsl-list@xxxxxxxxxxxxxxxxxxxxxx > [mailto:owner-xsl-list@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of > Satish, L. Gnanendra > Sent: 27 September 2002 09:43 > To: 'xsl-list@xxxxxxxxxxxxxxxxxxxxxx' > Subject: RE: Formatted output > > > Hello Mike, > > I have a xml such as this (which is shown simpler): > > > > <Behaviour> > > <BehaviourInfo ID="1"> > > <Trap><Name>Trap1</Name></Trap> > > > <Message><Name>Msg1</Name><MessageLevel>Major</MessageLevel></Message> > > </BehaviourInfo> > > <BehaviourInfo ID="2"> > > <Trap><Name>Trap2</Name></Trap> > > > <Message><Name>Msg1</Name><MessageLevel>Minor</MessageLevel></Message> > > </BehaviourInfo> > > <BehaviourInfo ID="3"> > > <Trap><Name>Trap3</Name></Trap> > > > <Message><Name>Msg2</Name><MessageLevel>Cleared</MessageLevel> > </Message> > > </BehaviourInfo> > > <BehaviourInfo ID="4"> > > <Trap><Name>Trap4</Name></Trap> > > > <Message><Name>Msg1</Name><MessageLevel>Critical</MessageLevel > ></Message> > > </BehaviourInfo> > > </Behaviour> > > Also there is a seperate block, > <Message> > <MessageInfo ID="1"> > <Name>Msg1</Name> > </MessageInfo> > <MessageInfo ID="2"> > <Name>Msg2</Name> > </MessageInfo> > <MessageInfo ID="3"> > <Name>Msg3</Name> > </MessageInfo> > <Message> > > > > > I would like an HTML output like: > > "An alarm message is triggered by the traps 'trap1, trap2, > > trap4' and will be cleared when the trap 'trap3' comes in." > > I have just given u an hypothetical example. The trap > positions might vary > and also there are no fixed number of traps. > But I have solved it by using two template calls - one for > the triggering > alarms and another for the clearing alarms. But there is > another hitch, I > cannot give commas to the traps. This is called from the > Message template: > > <xsl:template name="Call_MsgClearedBySystemFindTriggerTraps"> > <xsl:variable name="MsgName" select="Name"/> > <xsl:for-each select="//Behaviour/BehaviourInfo"> > <xsl:variable name="BhvrMsgName" > select="BehaviourMessages/BehaviourMessagesInfo/Name"/> > <xsl:if test="$BhvrMsgName=$MsgName"> > <xsl:variable name="x" > select="BehaviourMessages/BehaviourMessagesInfo/OIDInfo/Messag > e/MessageInfo/ > MsgLevel[TextString='Cleared']"/> > <-- !='Cleared' doesn't work --> > <xsl:choose> > <xsl:when test="$x"> > </xsl:when> > <xsl:otherwise> > <xsl:for-each select="Trap/Name"> > <B><I><xsl:value-of select="."/></I></B> > <xsl:if test="position()<last()"><xsl:value-of > select="$Comma"/></xsl:if> > <-- Doesn't insert commas --> > </xsl:for-each> > </xsl:otherwise> > </xsl:choose> > </xsl:if> > </xsl:for-each> > </xsl:template> > > This doesn't work the way I want. > > Thanx, > Gnanendra. > > -----Original Message----- > From: Michael Kay [mailto:michael.h.kay@xxxxxxxxxxxx] > Sent: Friday, September 27, 2002 1:49 PM > To: xsl-list@xxxxxxxxxxxxxxxxxxxxxx > Subject: RE: Formatted output > > > You have asked this before. You haven't explained enough about how the > input might vary. If the only thing that can vary is the > content of the > four <Name> elements, then it's trivially simple: > > <html> > <p>An alarm messge is triggered by the traps > '<xsl:value-of select="/Behaviour/BehaviourInfo[@ID=1]/Trap/Name"/>, > <xsl:value-of select="/Behaviour/BehaviourInfo[@ID=2]/Trap/Name"/>, > <xsl:value-of select="/Behaviour/BehaviourInfo[@ID=4]/Trap/Name"/>' > and will be cleared when the trap > '<xsl:value-of select="/Behaviour/BehaviourInfo[@ID=3]/Trap/Name"/>' > comes in.</p> > </html> > > If converting "Trap1" to "trap1" is an important characteristic of the > transformation, you can do this using the substring() and translate() > functions. > > - - - - - - - Appended by Scientific-Atlanta, Inc. - - - - - - - > This e-mail and any attachments may contain information which is > confidential, proprietary, privileged or otherwise protected > by law. The > information is solely intended for the named addressee (or a person > responsible for delivering it to the addressee). If you are > not the intended > recipient of this message, you are not authorized to read, > print, retain, > copy or disseminate this message or any part of it. If you > have received > this e-mail in error, please notify the sender immediately by > return e-mail > and delete it from your computer. > > XSL-List info and archive: http://www.mulberrytech.com/xsl/xsl-list > XSL-List info and archive: http://www.mulberrytech.com/xsl/xsl-list 
|
PURCHASE STYLUS STUDIO ONLINE TODAY!Purchasing Stylus Studio from our online shop is Easy, Secure and Value Priced! 
Download The World's Best XML IDE!Accelerate XML development with our award-winning XML IDE - Download a free trial today! Subscribe in XML format
|
