RE: How do can I select distinct nodes and adding a co

Hello Cams,

You'll have to exclude any nodes that already occur in the first file:

This concatenates the text value and the xxxx/@att value and sees if it
occurs as an @oid value in the first file.

  <xsl:apply-templates
         select="xxx[
                 (not (contains(concat(.,'||',xxxx/@*),
                      $first/mapping/@oid)) 
                  and
                  (generate-id() = generate-id(key('distinctlyXXX', 
                       self::xxx[not(xxxx/@*)]|xxxx/@*)))
                 )]"/>

You'll need to change the bits relating to the first file, to reflect its
structure:

 <xsl:variable name="first_path" select="'first.xml'"/>
 <xsl:variable name="first" select="document($first_path)/root"/>
 <xsl:variable name="first_count_maps" 
   select="count($first/mapping)"/>

hth
Tom



> -----Original Message-----
> From: Cams Ismael [mailto:Ismael.Cams@xxxxxxxxxxxxxxx]
> Sent: 27 November 2002 15:18
> To: 'xsl-list@xxxxxxxxxxxxxxxxxxxxxx'
> Subject: RE:  How do can I select distinct nodes and adding a
> counter at the sa me time
> 
> 
> Hello,
> 
> I have been already helped a lot by this solution. However again I
> encountered a problem for which I don't see a solution 
> immediately. What I
> need now is a mechanism to determine if the xxx value or att1 
> attribute is
> already in the first xml file. When already available this 
> node should not
> be count. So what I want to do is the next:
> 
> first file:
> 
> 	<root>
> 		<mapping oid=".1.5.3.2" id="1"/>
> 		<mapping oid=".1.5.3.4.5" id="3"/>
> 	</root>
> 
> second file:
> 	<xx>
>  		<xxx>.1.5.6.3.8
>  		   <xxxx att1=".1.5.6.3.8"/>
>  		<xxx>
>  		<xxx>.1.5.6.3.10
>  		   <xxxx att2="1.5.3.4.5"/>
>  		<xxx>
>  		<xxx>.1.5.6.4.5</xxx>
>  	</xx>
> 
> result file should be:
> 	<root>
> 		<mapping oid=".1.5.3.2" id="1"/>
> 		<mapping oid=".1.5.3.4.5" id="3"/>
> 		<mapping oid=".1.5.3.4.8" id="5"/>
> 		<mapping oid=".1.5.6.4.5" id="7"/>
> 	</root>
> 
> The solution I have now gives the following result:
> 	<root>
> 		<mapping oid=".1.5.3.2" id="1"/>
> 		<mapping oid=".1.5.3.4.5" id="3"/>
> 		<mapping oid=".1.5.3.4.8" id="5"/>
> 		<mapping oid=".1.5.6.4.5" id="9"/> <!--This id should be
> 7-->
> 	</root>
> 
> The stylesheet I use select all distinct values with use of the Muench
> method. Than I check if the value was already available in 
> the first file.
> What I actually need is a selection of all distinct nodes 
> that don't already
> exist in the first file. If all this information was in one 
> file I think I
> could handle it, but no two files are used and I don't see directly a
> solution for this. Hopefully someone can help me with this again ?
> 
> Thanks in advance.
> 
> Kind regards,
> Ismaël
> 
> -----Original Message-----
> From: TSchutzerWeissmann@xxxxxxxxxxxxxxxx
> [mailto:TSchutzerWeissmann@xxxxxxxxxxxxxxxx]
> Sent: vrijdag 22 november 2002 16:59
> To: xsl-list@xxxxxxxxxxxxxxxxxxxxxx
> Subject: RE:  How do can I select distinct nodes and adding a
> counter at the sa me time
> 
> 
> Dear Ismaël
> 
> >I know what you mean, but the problem I have is how do I 
> produce a tree
> with
> >distinct values that I can access afterwards.
> 
> This is essentially a grouping problem. You can use xsl:key to group
> elements according to a particular value. This will allow you 
> to access the
> distinct values as a nodeset, without having to put them in a 
> variable and
> use an extension function.
> 
> [from your first email]
> 
> > The second one looks like this:
> > 
> > 	<xx>
> > 		<xxx>.1.5.6.3.8
> > 		   <xxxx att1=".1.5.6.3.8"/>
> > 		<xxx>
> > 		<xxx>.1.5.6.3.10
> > 		   <xxxx att2="1.5.6.3.9"/>
> > 		<xxx>
> > 		<xxx>.1.5.6.4.5</xxx>
> > 	</xx>
> [...]
> >  What I want to do know is getting out of the second xml file the
> > values of the attributes mapped onto an odd number (5,7,9) when this
> > attribute is available. When not available the text value 
> of the tag must
> be
> > used. 
> 
> The only hard bit is setting up the key so that it ignores 
> the text value of
> the xxx tag if there's an xxxx child with an attribute.
> 
> <xsl:key name="distinctlyXXX" match="xxx" 
>   use="self::xxx[not(xxxx/@*)]|xxxx/@*"/>
> 
> <!-- group on the xxxx child's first attribute, if it exists, 
>      otherwise on the text value of xxx -->
> 
> <xsl:variable name="first_path" select="firstFile.xml"/>
> <xsl:variable name="first" select="document($first_path)"/>
> <xsl:variable name="first_count_maps" 
> select="count($first/mapping/map)"/>
> 
>   <xsl:template match="xx">
>     <mapping>
>       <xsl:copy-of select="$first/mapping/map"/>
>       <xsl:apply-templates
>         select="xxx[generate-id() = generate-id(key('distinctlyXXX', 
>                 self::xxx[not(xxxx/@*)]|xxxx/@*))]"/>
>       <!-- this is classic Muenchian grouping -->
>     </mapping>
> </xsl:template>
> 
>   <xsl:template match="xxx">
>     <map oid="{string(self::xxx[not(xxxx/@*)] | xxxx/@*)}"
>       id="{(position() + $first_map_count) * 2 - 1}">
>       <xsl:value-of select=". | xxxx/@*"/>
>     </map>
>   </xsl:template>
> 
>  XSL-List info and archive:  http://www.mulberrytech.com/xsl/xsl-list
> 
>  XSL-List info and archive:  http://www.mulberrytech.com/xsl/xsl-list
> 

 XSL-List info and archive:  http://www.mulberrytech.com/xsl/xsl-list